Laser alloyed coatings of TiB2/Graphite on 9Cr18 stainless steel surface

被引：0
|
作者：
Ying Li-xia [1 ]
Wang Li-qin
Jia Xiao-mei
Gu Le
机构：
[1] Harbin Engn Univ, Sch Mechatron Engn, Harbin 150001, Heilongjiang, Peoples R China
[2] Harbin Inst Technol, Sch Mechatron Engn, Harbin 150001, Heilongjiang, Peoples R China
来源：
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2007年 / 14卷 / 03期
关键词：
laser alloying; TiB2; graphite; carbide;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Modified coatings including carbide of iron, nickel, chromium, silicon, and titanium are obtained on 9Cr18 stainless steel surface by laser alloying. The processing method, the microstructure, the interface, the tribological properties, and the forming mechanisms of the coatings are analyzed. The results show that the microstructure of the alloyed coatings is mainly irregular FeC crystals. Carbides of chromium and iron are around the FeC crystals. Small granular TiC disperses in the alloyed coatings. The microhardness of the alloyed coatings is greatly improved because of the occurrence of carbide with high hardness. At the same time, the wear resistance of the alloyed coatings are higher than that of 9Cr18 stainless steel.
引用
收藏
页码：69 / 72
页数：4
相关论文
共 50 条
  • [41] Investigation of sintering behavior in a low-alloyed steel powder containing TiB2 particles
    Matsumoto N.
    Miyake T.
    Kondoh M.
    Oishi Y.
    Toyama K.
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2018, 65 (05): : 227 - 232
  • [42] Improvement of tribological properties of 9Cr18 steel by metal plasma immersion ion implantation
    Zeng, Zhaoming
    Tang, Baoyin
    Wang, Songyan
    Tian, Xiubo
    Wang, Xiaofeng
    Paul, K.Chu
    Zhang, Tao
    Zhenkong Kexue yu Jishu Xuebao/Vacuum Science and Technology, 2000, 20 (02): : 77 - 80
  • [43] Investigation of Sintering Behavior in Low-alloyed Steel Powder Containing TiB2 Particles
    Matsumoto, Nobuhiko
    Miyake, Toshitake
    Kondoh, Mikio
    Oishi, Yusuke
    Toyama, Kazuhiro
    MATERIALS TRANSACTIONS, 2019, 60 (09) : 1943 - 1948
  • [44] Microstructure and corrosion characteristics of 304 stainless steel laser-alloyed with Cr-CrB2
    Sun, G. F.
    Zhang, Y. K.
    Zhang, M. K.
    Zhou, R.
    Wang, K.
    Liu, C. S.
    Luo, K. Y.
    APPLIED SURFACE SCIENCE, 2014, 295 : 94 - 107
  • [45] Selective laser melting of 316L stainless steel: Influence of TiB2 addition on microstructure and mechanical properties
    Salman, O. O.
    Gammer, C.
    Eckert, J.
    Salih, M. Z.
    Abdulsalam, E. H.
    Prashanth, K. G.
    Scudino, S.
    MATERIALS TODAY COMMUNICATIONS, 2019, 21
  • [46] Structure and Properties of TiB2 ― AlN Coatings Made by Spark and Laser Methods
    Irina A. Podchernyaeva
    Alla D. Panasyuk
    Powder Metallurgy and Metal Ceramics, 2000, 39 : 554 - 559
  • [47] Microstructure of TiB2/carbon steel surface-alloyed materials fabricated by high-energy electron beam irradiation
    Kwangjun Euh
    Sunghak Lee
    Keesam Shin
    Metallurgical and Materials Transactions A, 1999, 30 : 3143 - 3151
  • [48] Microstructure of TiB2/carbon steel surface-alloyed materials fabricated by high-energy electron beam irradiation
    Euh, K
    Lee, S
    Shin, K
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (12): : 3143 - 3151
  • [49] Abrasion resistance of stainless-steel composites reinforced with hard TiB2 particles
    Tjong, SC
    Lau, KC
    COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (08) : 1141 - 1146
  • [50] EFFECT OF TiB2 ADDITION ON MICROSTRUCTURE AND PROPERTIES OF THE 316L STAINLESS STEEL
    Sulima, Iwona
    METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2014, : 453 - 458
12345