Effects of double quenching on fatigue properties of high carbon bearing steel with extra-high purity

被引：29

作者：

Cao, Zhaoxi ^{[1
]}

Shi, Zhiyue ^{[2
]}

Yu, Feng ^{[2
]}

Sugimoto, Koh-ichi ^{[3
]}

Cao, Wenquan ^{[2
]}

Weng, Yuqing ^{[2
]}

机构：

[1] Univ Sydney, Sci Fac, Sydney, NSW 2006, Australia

[2] CISRI, Beijing 100081, Peoples R China

[3] Shinshu Univ, Matsumoto, Nagano 3900802, Japan

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2019年 / 128卷

基金：

国家重点研发计划; 中国国家自然科学基金;

关键词：

Bearing steel; Extra-high purity steel; Double quenching; Fatigue property; Inclusion characters; Weibull distribution; REFINEMENT; TOUGHNESS; LIFE;

D O I：

10.1016/j.ijfatigue.2019.06.036

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this study, high carbon bearing steel of GCr15 (100Cr6) is applied to explore the double quenching effects on both rotated bending fatigue strength (RBF-strength) and rolling contact fatigue life (RCF-life). The RBF-strength and RCF-life is about 1000 MPa and 1.1 x 10(7) cycles under a maximum Hertzian stress of 4.5 GPa for the single quenched and tempered specimens but about 1030 MPa and 5.6 x 10(7) cycles for the double quenched and tempered specimens. The enhancement of RBF-strength and RCF-life are attributed to the increased impact toughness due to the refinements of both carbides and prior austenite grain size.

引用

页数：6

共 50 条

[21] EFFECTS OF MICROSTRUCTURE ON THE FATIGUE PROPERTY OF HIGH CARBON STEEL.
Sato, Teruaki
Tomomoto, Kiyokazu
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1980, 66 (02): : 239 - 243
[22] EFFECTS OF MICROSTRUCTURE ON THE FATIGUE PROPERTY OF HIGH-CARBON STEEL
SATO, T
TOMOMOTO, K
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1980, 20 (12) : 821 - 825
[23] Fatigue characteristics of bearing steel in very high cycle fatigue
Chang-Min Suh
Jong-Hyoung Kim
Journal of Mechanical Science and Technology, 2009, 23 : 420 - 425
[24] Fatigue characteristics of bearing steel in very high cycle fatigue
Chana-Min, Suh
Jong-Hyoung, Kim
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (02) : 420 - 425
[25] Influence of Deformation and Quenching Temperature on Structures and Properties of High Nitrogen Stainless Bearing Steel
Zhang, Shanju
Yang, Maosheng
Lei, Ting
MATERIALS PERFORMANCE, MODELING AND SIMULATION, 2013, 749 : 484 - +
[26] Very high cycle fatigue properties of bainitic high carbon-chromium steel
Mayer, H.
Haydn, W.
Schuller, R.
Issler, S.
Furtner, B.
Bacher-Hoechst, M.
INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (02) : 242 - 249
[27] Study on behavior and load bearing capacities of slender steel tubular columns and eccentrically loaded steel tubular columns filled with extra-high strength concrete
Tan, Kefeng
Pu, Xincheng
Jianzhu Jiegou Xuebao/Journal of Building Structures, 2000, 21 (02): : 12 - 19
[28] Effects of quenching process on mechanical properties and microstructure of high strength steel
Duan Zhengtao
Li Yanmei
Zhang Mingya
Shi Minghan
Zhu Fuxian
Zhang Shunhu
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2012, 27 (06): : 1024 - 1028
[29] Effects of quenching process on mechanical properties and microstructure of high strength steel
Zhengtao Duan
Yanmei Li
Mingya Zhang
Minghan Shi
Fuxian Zhu
Shunhu Zhang
Journal of Wuhan University of Technology-Mater. Sci. Ed., 2012, 27 : 1024 - 1028
[30] Effects of Quenching Process on Mechanical Properties and Microstructure of High Strength Steel
段争涛
JournalofWuhanUniversityofTechnology(MaterialsScienceEdition), 2012, 27 (06) : 1024 - 1028

← 1 2 3 4 5 →