Optimization of concrete mix design to account for strength and hydration heat in massive concrete structures

被引：36

作者：

Bourchy, Agathe ^{[1
]}

Barnes, Laury ^{[2
]}

Bessette, Laetitia ^{[2
]}

Chalencon, Florian ^{[3
]}

Joron, Aurelien ^{[3
]}

Torrenti, Jean Michel ^{[1
]}

机构：

[1] IFSTTAR, Mat & Struct Dept, 14-20 Blvd Newton, F-77420 Champ Sur Marne, France

[2] Vicat SA, 4 Rue Aristide Berges, F-38080 Lisle Dabeau, France

[3] Sigma Beton SA, 4 Rue Aristide Berges, F-38080 Lisle Dabeau, France

来源：

CEMENT & CONCRETE COMPOSITES | 2019年 / 103卷

关键词：

Concrete; Formulation; Supplementary cementitious materials; Hydration heat; Compressive strength; PORTLAND-CEMENT; MINERAL ADMIXTURES; FILLER; FINENESS; FRESH; RATIO; SUPERPLASTICIZER; TEMPERATURE; ETTRINGITE; EFFICIENCY;

D O I：

10.1016/j.cemconcomp.2019.05.005

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

In the case of massive concrete structures, the heat generated by cement hydration may cause cracking due to thermal strains. The mix design of the concrete used for such structures has to take account of mechanical properties and generated temperatures. Using experimental design principles, the hydration heat and the development of compressive strength are measured in order to determine how the composition of concrete and the presence of SCM influence the characteristics of concrete and to create a mix design protocol. This protocol can help to determine which mix design minimizes the hydration temperature for a given compressive strength.

引用

页码：233 / 241

页数：9

共 50 条

[31] Full factorial optimization of concrete mix design for hot climates
Soudki, KA
El-Salakawy, EF
Elkum, NB
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2001, 13 (06) : 427 - 433
[32] OPTIMIZATION OF MIX-DESIGN OF CHEMICALLY RESISTANT SPRAYED CONCRETE
Hermann, Radek
Drochytka, Rostislav
Kolisko, Jiri
Reiterman, Pavel
SPECIAL CONCRETE AND COMPOSITES 2018, 2019, 22 : 26 - 30
[33] Dynamic mix design optimization of high-performance concrete
Ziaei-Nia, Ali
Shariati, Mahdi
Salehabadi, Elnaz
STEEL AND COMPOSITE STRUCTURES, 2018, 29 (01): : 67 - 75
[34] MIX DESIGN FOR PFA CONCRETE
HUGHES, BP
ALANI, MNA
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS PART 1-DESIGN AND CONSTRUCTION, 1990, 88 : 639 - 668
[35] Software for concrete mix design
Manipal Inst of Technology
Indian Concrete Journal, 1996, 70 (09): : 489 - 493
[36] ACCOUNT OF EVENTS IN THE HYDRATION OF A RETARDED CONCRETE STRUCTURE
ROSSKOPF, PA
AMERICAN CERAMIC SOCIETY BULLETIN, 1980, 59 (03): : 368 - 368
[37] CONCRETE MIX DESIGN FOR THE REMEDY OF CORRODED CONCRETE SLEEPERS
Shala, Fitim
Shaukat, Muhammad Umair
ROAD AND RAIL INFRASTRUCTURE IV, 2016, : 723 - 731
[38] Hydration Heat and Autogenous Shrinkage of High-Strength Mass Concrete
Kim, Gyuyong
Lee, Euibae
Koo, Kyungmo
JOURNAL OF ASIAN ARCHITECTURE AND BUILDING ENGINEERING, 2009, 8 (02) : 509 - 516
[39] Blended cement and lightweight concrete using scoria: mix design, strength, durability and heat insulation characteristics
Hossain, Khandaker M. Anwar
INTERNATIONAL JOURNAL OF THE PHYSICAL SCIENCES, 2006, 1 (01): : 5 - 16
[40] Numerical Analysis of Temperature Stress Generated by Hydration Heat in Massive Concrete Pier
Zhou, Junlong
Li, Xiaopeng
Wang, Zihao
Wang, Yuquan
Yan, Chuan
Jin, Hexin
PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 2025,

← 1 2 3 4 5 →