Water Quality Improvement through Rainwater Tanks: A Review and Simulation Study

被引:9
|
作者
Imteaz, Monzur Alam [1 ]
Galvao Boulomytis, Vassiliki Terezinha [2 ]
Yilmaz, Abdullah G. [3 ]
Shanableh, Abdallah [4 ]
机构
[1] Swinburne Univ Technol, Dept Civil & Construct Engn, Melbourne, Vic 3122, Australia
[2] Fed Inst Sci Educ & Technol Sao Paulo, Fac Civil Engn, Dept Water Engn, BR-11660 Caraguatatuba, Brazil
[3] La Trobe Univ, Dept Engn, Melbourne, Vic 3550, Australia
[4] Univ Sharjah, Dept Civil & Environm Engn, Sharjah 27272, U Arab Emirates
关键词
total suspended solids; total phosphorus; total nitrogen; MUSIC; CLIMATE-CHANGE; RUNOFF QUALITY; ROOF; RELIABILITY; IMPACTS; SYSTEMS;
D O I
10.3390/w14091411
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
First, this paper presents a thorough review of water quality data using a rainwater tank, categorizing the data as with and without sedimentation. Data are presented showing minimum, maximum, and mean values for the different parameters. The data measured from several sources reveal that water collected from the tank is much better than the water directly collected from the roof. In addition, to analyse the phenomena through a mathematical model, a hypothetical 5 kL rainwater tank with a 200 m(2) roof was modelled with the MUSIC model. The simulations were compared with the measured water quality data from a rainwater tank in Melbourne. In general, we found that MUSIC's simulations on the mean daily concentrations of total suspended solids (TSS) and total phosphorus (TP) are slight underestimations compared to the measured data from Melbourne. Further MUSIC simulations reveal that significant reductions in the daily maximum concentrations of TSS, TP, and total nitrogen (TN) are expected through a rainwater tank.
引用
收藏
页数:12
相关论文
共 50 条
  • [41] Production and Evaluation of Composite Rainwater Storage Tanks from Recycled Materials Part 2: Stored Water Quality Assessment
    Olorunnisola, Abel O.
    Alaka, Amarachi C.
    RECYCLING, 2018, 3 (02)
  • [42] Investigation of Microbiological Quality Changes of Roof-Harvested Rainwater Stored in the Tanks
    Zdeb, Monika
    Zamorska, Justyna
    Papciak, Dorota
    Skwarczynska-Wojsa, Agata
    RESOURCES-BASEL, 2021, 10 (10):
  • [43] Quality indicators, management and use of stored rainwater in tanks at semiarid of Bahia State
    Fonseca de Menezes, George Fabian
    dos Santos, Delfran Batista
    Batista, Rafael Oliveira
    Azevedo, Delka de Oliveira
    Santana, Gessionei da Silva
    Silva, Antonio Sousa
    Araujo Passos Duarte, Aecio Jose
    AGRARIAN, 2013, 6 (22): : 460 - 472
  • [44] A method for sizing first flush water diverters tanks in rainwater harvesting systems
    Lopez-Patino, Gonzalo
    Javier Martinez-Solano, F.
    Amparo Lopez-Jimenez, P.
    Fuertes-Miquel, Vicente S.
    ENVIRONMENTAL HYDRAULICS: THEORETICAL, EXPERIMENTAL AND COMPUTATIONAL SOLUTIONS, 2010, : 311 - 314
  • [45] Predicting daily potable water savings by using rainwater tanks at urban scale
    Xu, Hui
    Rahilly, Mike
    Maheepala, Shiroma
    HYDROLOGICAL CYCLE AND WATER RESOURCES SUSTAINABILITY IN CHANGING ENVIRONMENTS, 2011, 350 : 254 - +
  • [46] Netrix: A Solar-Powered Water Measurement Device for Rainwater Collection Tanks
    Munns, Austin
    Ramirez, Luis E.
    Witchgers, John C.
    Rodriguez, Jordan
    Goulart, Ana E.
    2019 IEEE AFRICON, 2019,
  • [47] Reliability analysis of rainwater tanks in Melbourne using daily water balance model
    Imteaz, Monzur Alam
    Ahsan, Amimul
    Naser, Jamal
    Rahman, Ataur
    RESOURCES CONSERVATION AND RECYCLING, 2011, 56 (01) : 80 - 86
  • [48] Evaluation of plumbed rainwater tanks in households for sustainable water resource management: a real-time monitoring study
    Umapathi, Shivanita
    Chong, Meng Nan
    Sharma, Ashok K.
    JOURNAL OF CLEANER PRODUCTION, 2013, 42 : 204 - 214
  • [49] Clean Tanks Deliver Quality Water
    Cashion, Bob, 1600, John Wiley and Sons Inc (39):
  • [50] Products quality improvement through numerical simulation in Steel Industry
    Demurger, J.
    Forestier, R.
    Kieber, B.
    Mathieu, G.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 359 - 362