Effect of Heat Transfer Features on Maximal Surface Temperature of Spherical Fuel Element

被引：0

作者：

Slyusarskiy, Konstantin, V ^{[1
,2
]}

Koothan, Venkatesvaran V. ^{[2
]}

机构：

[1] Natl Univ Sci & Technol MISIS, Moscow 119049, Russia

[2] Natl Res Tomsk Polytech Univ, Tomsk 634050, Russia

来源：

THERMOPHYSICAL BASIS OF ENERGY TECHNOLOGIES (TBET 2020) | 2021年 / 2337卷

关键词：

FLOW;

D O I：

10.1063/5.0046486

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The heat exchange in conditions of pebble bed with spherical fuel were studied in wide range of main operational parameter variation. The inlet velocity of the flow was varied in range 0.5-5 m/s, the pressure - in range 3-9 MPa, inlet gas temperature - 573-1073 K, heat generation rate - 1-20 MW/m(3). The helium was used as the coolant. The surface temperatures were determined by thermodynamic calculations and simulation via Ansys, The correction factor to the heat transfer coefficient value was introduced to match the maximal fuel surface temperature obtained by simulation and engineering calculations. The main factors affecting the maximal surface temperature of spherical fuel in conditions of pebble bed reactor were determined.

引用

页数：7

共 50 条

[21] Intensification mechanism of heat transfer on surface with the aid of spherical grooves
Leontiev, A.I.
Olimpiev, V.V.
Dilevskaya, E.V.
Isaev, S.A.
Izvestiya Akademii Nauk. Energetika, 2002, (02): : 117 - 136
[22] TEMPERATURE AND HEAT FLUX DISTRIBUTION IN NUCLEAR FUEL ELEMENT RODS
NIJSING, R
NUCLEAR ENGINEERING AND DESIGN, 1966, 4 (01) : 1 - &
[23] FUEL-TO-CLADDING HEAT-TRANSFER COEFFICIENT IN A REACTOR-FUEL ELEMENT
LASSMANN, K
WARME UND STOFFUBERTRAGUNG-THERMO AND FLUID DYNAMICS, 1979, 12 (3-4): : 185 - 202
[24] Investigation on heat transfer of solid fuel surface and regression rate of solid fuel ramjet effect by swirl flow
Li W.
Chen X.
Zhou C.
Musa O.
Hangkong Dongli Xuebao/Journal of Aerospace Power, 2019, 34 (04): : 937 - 949
[25] Effect of Heat Transfer Surface Shape on Efficiency of Gas Dynamic Temperature Stratification
Tsynaeva A.A.
Nikitin M.N.
Russian Aeronautics, 2017, 60 (4): : 627 - 631
[26] Effect of system pressure on spray cooling heat transfer and surface temperature uniformity
Cheng, Wenlong
Han, Fengyun
Liu, Qinie
Fan, Hanlin
Huagong Xuebao/CIESC Journal, 2010, 61 (12): : 3086 - 3091
[27] TEMPERATURE STRUCTURE AND HEAT TRANSFER CHARACTERISTICS OF AN ELECTRICALLY HEATED MODEL OF A 7-ROD CLUSTER FUEL ELEMENT
KIDD, GJ
STELZMAN, WJ
HOFFMAN, HW
MECHANICAL ENGINEERING, 1969, 91 (05) : 95 - &
[28] Heat Conductivity in Ball Fuel Element with Random Variation of Heat Transfer Coefficient.
Bogomolov, G.I.
Izvestia vyssih ucebnyh zavedenij. Masinostroenie, 1983, (03): : 55 - 58
[29] Critical temperature and specific heat for Cooper pairing on a spherical surface
Gladilin, V. N.
Tempere, J.
Silvera, I. F.
Devreese, J. T.
PHYSICAL REVIEW B, 2006, 74 (10):
[30] STUDY OF HEAT TRANSFER MODEL OF THE SPIRAL-FIN FUEL ELEMENT
Zhang Dan
Liu Changwen
Lu Jianchao
PROCEEDINGS OF THE 18TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING 2010, VOL 4 PTS A AND B, 2011, : 769 - 775

← 1 2 3 4 5 →