Design and CFD modeling of gasifier stove combined with heat exchanger for water heating application

被引:7
|
作者
Nega, Tayachew [1 ]
Tesfaye, Assefa [2 ]
Paramasivam, Prabhu [3 ]
机构
[1] Univ Gondar, Dept Mech Engn, Gondar, Ethiopia
[2] Mettu Univ, Coll Engn & Technol, Dept Mech Engn, 318, Mettu, Ethiopia
[3] Mettu Univ, Coll Engn & Technol, 318, Mettu, Ethiopia
关键词
ENERGY; PERFORMANCE; DEMAND;
D O I
10.1063/5.0081001
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Manufacturing industries use a huge amount of power to heat water. The ability to control pollutant gas species released from the company by improving the efficiency of combustion reduces global warming and energy bills associated with water heating. In this study, computational fluid dynamics (CFD) thermal analysis of a biomass gasifier and heat exchanger combined system has been used to study the effect of the concentration of species, such as CH4, CO2, and CO, on the gasification temperature. The power consumed by boilers for water heating in industries, hotels, restaurants, and other domestic hot water heating is, to some extent, to substitute by a combined system. The model and syngas energy analysis of the integrated system was investigated by assuming a eucalyptus wood chip as fuel from the literature with 5%wb ultimate and 10% proximate values to analyze the gasification performance. The reactor was designed to supply syngas gas energy through the pipe. The gasification system was investigated at temperatures ranging from 298 to 990 K. This range of temperature in the gasifier is enough for water heating applications. The CFD model is developed and validated with the experimental results obtained in the literature. Several parameters, such as syngas molar composition and mass fraction, lower heating value of biomass, gasifier efficiency (67.3%), biomass energy, product gas energy, energy gain by the heat exchanger, and hot water outlet temperature, were examined by varying temperature. As the result shows, the species concentrations in the gasifier vary with temperature and gasifying agent. To optimize the transfer of heat from the heat exchanger tube to cold water, the syngas circulation time inside the inner tube should be increased by making the inner tube-shaped zigzag. (c) 2022 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/). https://doi.org/10.1063/5.0081001
引用
收藏
页数:9
相关论文
共 50 条
  • [41] Analytical modeling of water condensation in condensing heat exchanger
    Jeong, Kwangkook
    Kessen, Michael J.
    Bilirgen, Harun
    Levy, Edward K.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (11-12) : 2361 - 2368
  • [42] Dynamic modeling of vapor-water heat exchanger
    He, Kun
    Cai, Ruizhong
    Hao, Hongbin
    Ren, Peilian
    Li, Li
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 2003, 43 (12): : 1679 - 1682
  • [43] What are the benefits of rigorous modeling in heat exchanger design?
    Cazenave, J.
    HYDROCARBON PROCESSING, 2012, 91 (09): : 95 - +
  • [44] Study on Application of Solar Heating System Integrated Latent Heat Store Heat Exchanger
    Mu, Zhenying
    ADVANCES IN ENERGY SCIENCE AND TECHNOLOGY, PTS 1-4, 2013, 291-294 : 158 - 161
  • [45] Passivity based control of heat exchanger networks with application to nuclear heating
    Dong, Zhe
    Li, Bowen
    Li, Junyi
    Jiang, Di
    Guo, Zhiwu
    Huang, Xiaojin
    Zhang, Zuoyi
    ENERGY, 2021, 223
  • [46] Annular free convection heat exchanger for solar water heating systems
    Nasr, A
    Morrison, GL
    Behnia, M
    HEAT AND MASS TRANSFER AUSTRALASIA 1996, 1998, : 105 - 112
  • [47] Corrosion failure analysis of the heat exchanger in a hot water heating boiler
    Liu, Shijie
    Wu, Haomin
    Zhao, Qinxin
    Liang, Zhiyuan
    ENGINEERING FAILURE ANALYSIS, 2022, 142
  • [48] The influence of heat exchanger performances on the design of indirect geothermal heating system
    Milanovic, P
    Jacimovic, B
    Genic, S
    ENERGY AND BUILDINGS, 2004, 36 (01) : 9 - 14
  • [49] Design and optimization of a combi boiler heat exchanger: A CFD-based approach
    Aydin, Ahmet
    Engin, Tahsin
    Kilic, Serhan
    APPLIED THERMAL ENGINEERING, 2024, 257
  • [50] APPLICATION OF ROUGH SURFACES TO HEAT-EXCHANGER DESIGN
    WEBB, RL
    ECKERT, ERG
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1972, 15 (09) : 1647 - &