Application of the FRI crack growth model for neutron-irradiated stainless steels in high-temperature water of a boiling water reactor environment

被引：12

作者：

Koshiishi, Masato ^{[1
]}

Hashimoto, Tsuneyuki ^{[1
]}

Obata, Ryoji ^{[2
]}

机构：

[1] Nippon Nucl Fuel Dev, 2163 Narita Cho, Oarai, Ibaraki 3111313, Japan

[2] Hitachi GE Nucl Energy, 1-1,Saiwai Cho 3 Chome, Hitachi, Ibaraki 3170073, Japan

来源：

CORROSION SCIENCE | 2017年 / 123卷

关键词：

Austenitic stainless steel; BWR; Neutron irradiation; Irradiation assisted stress corrosion cracking; Crack growth rate; Modelling; QUANTITATIVE PREDICTION; CORROSION BEHAVIOR;

D O I：

10.1016/j.corsci.2017.04.025

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study considered a methodology to reflect the effect on material properties by neutron irradiation onto the FRI model of the crack growth rate (CGR) of stress corrosion cracking developed at Tohoku University. Yield strength and strain hardening exponent were evaluated by a tensile test for irradiated stainless steels, and the relationship between mechanical property and strain to fracture of the oxide film was derived. Effect of the radiation-induced segregation on CGR was also discussed. The experimental tendencies for the CGR to increase with dose and almost saturate above 3 dpa were well replicated by the model calculations.

引用

页码：278 / 288

页数：11

共 50 条

[1] SUSCEPTIBILITY TO INTERGRANULAR CRACKING IN PRESSURIZED HIGH-TEMPERATURE WATER IN NEUTRON-IRRADIATED AUSTENITIC STAINLESS-STEELS
NAKATA, K
YOSHIDA, T
MASAOKA, I
SAITO, T
JACOBS, AJ
WOZADLO, GP
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1988, 52 (11) : 1167 - 1168
[2] Crack initiation behavior of neutron irradiated model and commercial stainless steels in high temperature water
Stephenson, Kale J.
Was, Gary S.
JOURNAL OF NUCLEAR MATERIALS, 2014, 444 (1-3) : 331 - 341
[3] Formulation of Irradiation Assisted Stress Corrosion Crack Growth Rates for Neutron-Irradiated Stainless Steels under Hydrogen Water Chemistry Conditions of Boiling Water Reactors
Koshiishi, Masato
Tanaka, Shigeaki
Obata, Ryoji
JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2022, 59 (09) : 1107 - 1116
[4] The effect of post-irradiation annealing on the stress corrosion crack growth rate of neutron-irradiated 304L stainless steel in boiling water reactor environment
Kuang, Wenjun
Hesterberg, Justin
Was, Gary S.
CORROSION SCIENCE, 2019, 161
[5] Capabilities for Conducting Crack Growth Test of Neutron-Irradiated Alloys in Light Water Reactor Environments
Ashida, Y.
Flick, A.
Andresen, P. L.
Was, G. S.
CORROSION, 2013, 69 (02) : 136 - 144
[6] Evaluation of Crack Growth Rates and Microstructures Near the Crack Tip of Neutron-Irradiated Austenitic Stainless Steels in Simulated BWR Environment
Chimi, Yasuhiro
Kasahara, Shigeki
Seto, Hitoshi
Kitsunai, Yuji
Koshiishi, Masato
Nishiyama, Yutaka
PROCEEDINGS OF THE 18TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS - WATER REACTORS, VOL 2, 2018, : 1039 - 1054
[7] A FATIGUE CRACK GROWTH MODEL FOR TYPE 304 AUSTENITIC STAINLESS STEELS IN A PRESSURIZED WATER REACTOR ENVIRONMENT
Barron, Kathleen C.
Paraventi, Denise J.
PROCEEDINGS OF ASME 2021 PRESSURE VESSELS AND PIPING CONFERENCE (PVP2021), VOL 1, 2021,
[8] Crack initiation of neutron-irradiated 304 L stainless steel in PWR primary water
Du, Donghai
Sun, Kai
Was, Gary S.
CORROSION SCIENCE, 2021, 193
[9] Fatigue crack growth behavior of reactor pressure vessel steels in air and high-temperature water environments
Huang, J. Y.
Yeh, J. J.
Kuo, R. C.
Jeng, S. L.
Young, M. C.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2008, 85 (11) : 772 - 781
[10] TEMPERATURE AND RISE TIME INPUTS TO FATIGUE CRACK GROWTH CALCULATIONS FOR AUSTENITIC STAINLESS STEELS IN A PRESSURISED WATER REACTOR ENVIRONMENT
Emslie, Julian
Watson, Chris
Gill, Chris
Wright, Keith
ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 1A, 2015,

← 1 2 3 4 5 →