Numerical simulations of forced convection heat transfer and flow characteristics of nanofluids in small tubes using two-phase models

被引:13
|
作者
Chen, Yan-jun [1 ]
Li, Yuan-yang [1 ]
Liu, Zhen-hua [1 ]
机构
[1] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai 200240, Peoples R China
基金
中国国家自然科学基金;
关键词
Nanofluid; Multiphase flow; Heat transfer; Simulation; LAMINAR MIXED CONVECTION; ENHANCEMENT; SINGLE;
D O I
10.1016/j.ijheatmasstransfer.2014.07.052
中图分类号
O414.1 [热力学];
学科分类号
摘要
Laminar and turbulent forced convection heat transfer and flow characteristics of nanofluids in small smooth tubes are numerically simulated using two kinds of multiphase-flow models. The simulated results are compared with the experimental results from the published papers and the traditional predicting correlations to investigate the applicability of these models for nanofluids. The multiphase-flow models including mixture model and Eulerian model, and both of them belong to the well-known Euler-Euler model. The effects of various parameters such as Reynolds number and nanoparticles concentration on the heat transfer and flow characteristics are investigated and discussed in each model. The study results show that little deviation exists between the simulated results and the traditional predicting correlations for low concentration nanofluid, which indicates that low concentration nanofluid has no meaningful nano-effect on forced convection heat transfer. While, non-traditional fluid characteristics occur and increase with increasing the nanoparticles concentration, and the simulated results using special models of multiphase flow are closer to the experimental data than that of the traditional correlations, which means the multiphase flow models are more accurate than traditional correlations for high concentration nanofluid. Moreover, the numerical results also indicate that the drag coefficients of simulated results have only little difference less than 0.4% with that of experimental results for nanofluids in the laminar flow region. However, the drag coefficients of simulated results have a increase by about 60-22% compared with the experimental results in the turbulent flow region. As conclusion, the present study indicates that the two-phase models, including mixture model and Eulerian model, can predict the forced convection heat transfer and flow characteristics of nanofluid well, and have important implications for the application of nanofluid. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:993 / 1003
页数:11
相关论文
共 50 条
  • [41] Numerical Study on the Forced Convection Heat Transfer of Nanofluids in Micro-Channels
    Shin, Hong-Cheol
    Han, Sangmok
    Kim, Sung-Min
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2017, 17 (11) : 8394 - 8403
  • [42] Heat transfer characteristics in circulating solar heat tubes based on gas-liquid two-phase flow
    Sun Z.
    Hu Q.
    Tu W.
    Fang S.
    Yang Y.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2019, 35 (24): : 246 - 254
  • [43] Numerical investigation of hydraulic and heat transfer characteristics of two-phase ice slurry in helically coiled tubes
    Cai, Lingling
    Mi, Sha
    Luo, Chun
    Liu, Zhiqiang
    ENERGY AND BUILDINGS, 2022, 256
  • [44] Forced convection around horizontal tubes bundles of a heat exchanger using a two-phase mixture model: Effects of nanofluid and tubes Configuration
    Tahmasebiboldaji, Mohammad
    Afrand, Masoud
    Barzinjy, Azeez A.
    Hamad, Samir M.
    Talebizadehsardari, Pouyan
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, 161
  • [45] Two-phase Flow Distribution Characteristics of Parallel-flow Evaporator Considering Heat Transfer in Flat Tubes
    Zhao L.
    Bao G.
    Yang Z.
    Tongji Daxue Xuebao/Journal of Tongji University, 2023, 51 (10): : 1641 - 1648
  • [46] Two-Phase Convection Heat Transfer in Microchannels
    Lin, C. Y.
    Hsieh, S. S.
    Chen, J. H.
    NANOTECH CONFERENCE & EXPO 2009, VOL 3, TECHNICAL PROCEEDINGS, 2009, : 513 - 516
  • [47] Flow boiling heat transfer characteristics of two-phase flow in microchannels
    Guo, Lei
    Zhang, Shusheng
    Hu, Jing
    AIP ADVANCES, 2022, 12 (05)
  • [48] DESIGN OF A TWO-PHASE FLOW FORCED CONVECTION LOOP FOR TWO-PHASE INSTABILITY ANALYSIS
    Ruspini, Leonardo
    Dorao, Carlos
    Fernandino, Maria
    EXPERIMENTAL FLUID MECHANICS 2010, 2010, : 569 - 581
  • [49] NUMERICAL INVESTIGATION OF THE SINGLE PHASE FORCED CONVECTION HEAT TRANSFER CHARACTERISTICS OF NANOFLUID FLOWING IN SMOOTH AND MICRO-FIN TUBES
    Kayaci, Nurullah
    Tabatabaei, Mahdi
    Celen, Ali
    Yildiz, Oguzhan
    Dalkilic, Ahmet Selim
    Wongwises, Somchai
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 7, PTS A-D, 2013, : 63 - 75
  • [50] Experimental and numerical study of forced convection heat transfer in a upward two-phase flow of air–water/SiO2 nanofluid with slug flow regime
    Abdolrasoul Pouranfard
    Mohammad Shamsi
    Hajir Karimi
    Farshad Nasiriazad
    Journal of Thermal Analysis and Calorimetry, 2023, 148 : 6501 - 6514