Heat transfer characteristics of flow boiling in a single horizontal microchannel

被引:40
|
作者
Celata, Gian Piero [1 ]
Saha, Sujoy Kumar [2 ]
Zummo, Giuseppe [1 ]
Dossevi, Denam [1 ]
机构
[1] ENEA Casaccia Res Ctr, Inst Thermal Fluid Dynam, I-00123 Rome, Italy
[2] Bengal Engn & Sci Univ, Dept Mech Engn, Howrah 711103, W Bengal, India
关键词
Heat transfer; Subcooled flow boiling; Microchannel; Instability; Flow pattern; 2-PHASE FLOW; PRESSURE-DROP; PARALLEL MICROCHANNELS; PART I; WATER; INSTABILITIES; TEMPERATURE; PREDICTION; PATTERNS; SINKS;
D O I
10.1016/j.ijthermalsci.2010.01.019
中图分类号
O414.1 [热力学];
学科分类号
摘要
Heat transfer characteristics of subcooled flow boiling of FC-72 in a single horizontal circular cross-section microchannel (480 mu m id., 800 mu m o.d., 102 mm long) are presented. Different flow patterns, both in the stable and unstable flow boiling regimes, have been captured using high speed video camera. Data in small, medium, high and very high heat flux cases under small, medium and high mass flux has been presented. Convective heat transfer coefficients in each flow boiling situation have been calculated and presented. Stable flow boiling with alternating bubbly/slug flow, slug/annular flow and annular/mist flow have been observed for heat flux of 150 kW/m(2) or higher and mass flux of 1500 kg/m(2) s or higher. Back and forth oscillations with flow instabilities have been observed in cases of lower heat and mass fluxes. However, no complete reverse flow in upstream direction has been observed. (C) 2010 Elsevier Masson SAS. All rights reserved.
引用
收藏
页码:1086 / 1094
页数:9
相关论文
共 50 条
  • [41] Characteristics of flow boiling oscillations in silicon microchannel heat sinks
    Muwanga, R.
    Hassan, I.
    MacDonald, R.
    [J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2007, 129 (10): : 1341 - 1351
  • [42] Flow boiling heat transfer of a zeotropic binary mixture of new refrigerants inside a single microchannel
    Azzolin, Marco
    Bortolin, Stefano
    Del Col, Davide
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2016, 110 : 83 - 95
  • [43] HEAT TRANSFER CHARACTERISTICS OF AMMONIA DURING FLOW BOILING IN A HORIZONTAL SMALL DIAMETER TUBE
    Gao, Yuping
    Zhan, Binfei
    Shao, Shuangquan
    Xu, Hongbo
    Tian, Changqing
    [J]. 5TH IIR INTERNATIONAL CONFERENCE ON SUSTAINABILITY AND THE COLD CHAIN, 2018, : 487 - 491
  • [44] Flow Boiling Heat Transfer Characteristics of R134a in a Horizontal Mini Tube
    Wang, Lihong
    Chen, Min
    Groll, Manfred
    [J]. JOURNAL OF CHEMICAL AND ENGINEERING DATA, 2009, 54 (09): : 2638 - 2645
  • [45] Flow Boiling Heat Transfer Characteristics in Horizontal, Three-Dimensional Enhanced Tubes
    Sun, Zhi-Chuan
    Ma, Xiang
    Ma, Lian-Xiang
    Li, Wei
    Kukulka, David J.
    [J]. ENERGIES, 2019, 12 (05)
  • [46] FLOW BOILING HEAT TRANSFER OF R134a IN A MICROCHANNEL HEAT SINK
    do Nascimento, Francisco J.
    Leao, Hugo L. S. L.
    Ribatski, Gherhardt
    [J]. PROCEEDINGS OF THE ASME 10TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS AND MINICHANNELS 2012, 2012, : 29 - 38
  • [47] Local flow boiling heat transfer characteristics in silicon microchannel heat sinks using liquid crystal thermography
    Megahed, Ayman
    [J]. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2012, 39 : 55 - 65
  • [48] Flow boiling heat transfer and pressure drop characteristics of water in a copper foam fin microchannel heat sink
    Fu, Kai
    Gao, Wuhuan
    Xu, Xianghua
    Liang, Xingang
    [J]. APPLIED THERMAL ENGINEERING, 2023, 218
  • [49] Enhanced Heat Transfer of Different-Mode-Interacting Boiling in Microchannel Flow Boiling
    Yoshio, Utaka
    Guo, Jiaxiang
    Chen, Zhihao
    [J]. Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology, 2020, 53 (09): : 917 - 923
  • [50] Experimental and numerical investigations of heat transfer and flow characteristics during flow boiling in straight and diverging PDMS microchannel
    Alugoju, Uday Kumar
    Dubey, Satish Kumar
    Javed, Arshad
    [J]. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2023, 33 (09)