Advances in the analysis and characterization of DLC coatings

被引：16
|
作者：
Bellido-Gonzalez, V [1 ]
Hampshire, J [1 ]
Jones, AHS [1 ]
Allen, TJ [1 ]
Witts, J [1 ]
Teer, DG [1 ]
Pierret, B [1 ]
机构：
[1] Teer Coatings Ltd, Hartlebury DY10 4JB, Worcs, England
来源：
SURFACE & COATINGS TECHNOLOGY | 1998年 / 98卷 / 1-3期
关键词：
DLC; magnetron sputtering; wear characterisation; ball crater;
D O I：
10.1016/S0257-8972(97)00245-4
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A series of new DLC coatings have been produced by magnetron sputtering using standard in-house equipment. Different tests have been carried out for the analysis and characterization of the coatings. By combining ball cratering with pin-on-disc, standard scratch and multiscratch tests, interesting information has been obtained (failure mechanism, wear properties, etc.). In addition, in combination with ball cratering, a novel method has been developed for the assessment of the refractive index of transparent and semi-transparent DLC films. In the pin-on-disc and multiscratch tests, the conductivity of the film was used to follow the wear progression (DLC has a relatively low electrical conductivity), This device can show local failures produced in the coating (indicated by an increase of film conductivity) which normally remains undetected in a frictional record. (C) 1998 Elsevier Science S.A.
引用
收藏
页码：1272 / 1279
页数：8
相关论文
共 50 条
  • [41] Tribological Properties of DLC Coatings in Helium
    Podgornik, B.
    Vizintin, J.
    Borovsak, U.
    Megusar, F.
    TRIBOLOGY LETTERS, 2012, 47 (02) : 223 - 230
  • [42] DEPOSITION AND CHARACTERIZATION OF ALUMINIUM NITRIDE (AlN) AND DIAMOND LIKE CARBON (DLC) HARD COATINGS
    Mednikarov, B.
    NANOSTRUCTURED MATERIALS, THIN FILMS AND HARD COATINGS FOR ADVANCED APPLICATIONS, 2010, 159 : 63 - 70
  • [43] DECORATIVE HARD COATINGS - ADVANCES IN OPTICAL CHARACTERIZATION TECHNIQUES
    BECK, U
    REINERS, G
    WITT, K
    THIN SOLID FILMS, 1993, 236 (1-2) : 184 - 190
  • [44] Microstructural and tribological characterization of DLC coatings deposited by plasma enhanced techniques on steel substrates
    Kasiorowski, T.
    Lin, J.
    Soares, P.
    Lepienski, C. M.
    Neitzke, C. A.
    de Souza, G. B.
    Torres, R. D.
    SURFACE & COATINGS TECHNOLOGY, 2020, 389 (389):
  • [45] Fatigue and adhesion characterization of DLC coatings on steel substrates by perpendicular and inclined impact tests
    Bouzakis, K. -D.
    Charalampous, P.
    Skordaris, G.
    Dimofte, F.
    Ene, N. M.
    Ehinger, R.
    Gardner, S.
    Modrzejewski, B. S.
    Fetty, J. R.
    SURFACE & COATINGS TECHNOLOGY, 2015, 275 : 207 - 213
  • [46] Tribological Properties of DLC Coatings in Helium
    B. Podgornik
    J. Vižintin
    U. Borovšak
    F. Megušar
    Tribology Letters, 2012, 47 : 223 - 230
  • [47] Interactions of iron with TiN and DLC coatings
    Stanek, J
    Rajchel, B
    Fedotova, J
    Fornal, P
    Binczycka, H
    HYPERFINE INTERACTIONS, 1998, 112 (1-4): : 55 - 58
  • [48] Properties of DLC coatings deposited by PACVD
    Nobili, L.
    Cavallotti, P.L.
    De Ponti, G.
    Colombo, D.
    Metallurgia Italiana, 1998, 90 (10): : 49 - 52
  • [49] Parametric optimization of CVD process for DLC Thin film coatings: a comparative analysis
    Kalita, Kanak
    Ghadai, Ranjan Kumar
    Chakraborty, Shankar
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2022, 47 (02):
  • [50] DLC-W coatings tested in combustion engine - Frictional and wear analysis
    Mutafov, P.
    Lanigan, J.
    Neville, A.
    Cavaleiro, A.
    Polcar, T.
    SURFACE & COATINGS TECHNOLOGY, 2014, 260 : 284 - 289
12345