Sensing and seam tracking of welding line in backingless V groove welding

The formation of stable back beads in the first layer weld during one side multilayer welding is important to achieve high quality welded metal joints. The authors tried to apply the switch back welding method to butt welding to join discs with flat metal plates without backing plates. During the welding, the gap was detected by processing the weld pool image taken with a CCD camera. Moreover, the tip of the electrode wire is changing owing to a curve of its wire extension in accordance with a rotation of the torch axis. Even though teaching is achieved before the welding, the weaving centre is shifted from the gap centre. The controller of the seam tracking was designed to prevent any steady state error.