Friction Stir Lap Welding 0.8-mm-Thick 2024 Aluminum Alloy with the Assistance of Stationary Shoulder

被引：5
|
作者：
Dong, Zhibo [1 ]
Yang, Kang [2 ]
Ren, Rong [2 ]
Wang, Guoqiang [2 ]
Wang, Lei [3 ]
Lv, Zan [2 ]
机构：
[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Heilongjiang, Peoples R China
[2] Shenyang Aerosp Univ, Sch Aerosp Engn, Shenyang 110136, Liaoning, Peoples R China
[3] Shenyang Inst Standardizat, Shenyang 110021, Liaoning, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2019年 / 28卷 / 11期
基金：
美国国家科学基金会;
关键词：
friction stir lap welding; lap shear failure load; sheet thickness reduction; stationary shoulder; MECHANICAL-PROPERTIES; MICROSTRUCTURES; SPEED;
D O I：
10.1007/s11665-019-04395-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, 0.8-mm-thick 2024 aluminum alloy was friction stir lap welded with the assistance of a stationary shoulder system. The joint surface formation, microstructure and mechanical properties of the welded joints were studied. The results showed that sound joints without defect could be obtained at a wide parameter range because stationary shoulder increased the material flow during welding. The stationary shoulder decreased the joint roughness from 125.5 to 58.9 mu m. A thickness reduction of 4% was achieved at a welding speed of 200 mm/min. The joint fabricated by the stationary shoulder system had superior lap shear properties compared to the joint fabricated using the conventional tool. A high failure load of 7440 N was achieved at welding speed of 200 mm/min. The joint presented tensile fracture mode and the fracture morphology showed typical ductile fracture.
引用
收藏
页码：6704 / 6713
页数：10
相关论文
共 50 条
  • [21] Microstructure evolution during friction stir welding of 2024 aluminum alloy
    Chang, B. (bhchang@tsinghua.edu.cn), 1600, Harbin Research Institute of Welding (34):
  • [22] Experimental and numerical investigations of bonding interface behavior in stationary shoulder friction stir lap welding
    Wen, Q.
    Li, W. Y.
    Wang, W. B.
    Wang, F. F.
    Gao, Y. J.
    Patel, V
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (01) : 192 - 200
  • [23] Experimental and numerical investigations of bonding interface behavior in stationary shoulder friction stir lap welding
    Q.Wen
    W.Y.Li
    W.B.Wang
    F.F.Wang
    Y.J.Gao
    V.Patel
    JournalofMaterialsScience&Technology, 2019, 35 (01) : 192 - 200
  • [24] Effect of heat-treatment on microstructure of 2024 aluminum alloy by stationary shoulder friction stir additive manufacturing
    Fu X.-R.
    Xing L.
    Huang C.-P.
    Liu F.-C.
    Ke L.-M.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2022, 32 (06): : 1550 - 1560
  • [25] Efficacy of Stationary Shoulder Friction Stir Welding to Minimize the Abnormal Behavior of Grain Growth in 7075 Aluminum Alloy
    Panwariya, Chirag
    Dwivedi, Dheerendra Kumar
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [26] Numerical Simulation and Experimental Studies on Stationary Shoulder Friction Stir Welding of Aluminum Alloy T-Joint
    Wang, Chungui
    Deng, Jun
    Dong, Chunlin
    Zhao, Yunqiang
    FRONTIERS IN MATERIALS, 2022, 9
  • [27] Temperature Field Measurement and Analyses of Friction Stir Welding of 18mm Thick 2219 Aluminum Alloy
    X. Lu
    Y. Zhou
    S. Sun
    Y. Luan
    J. Qiao
    J. Qian
    Experimental Techniques, 2023, 47 : 579 - 590
  • [28] Temperature Field Measurement and Analyses of Friction Stir Welding of 18mm Thick 2219 Aluminum Alloy
    Lu, X.
    Zhou, Y.
    Sun, S.
    Luan, Y.
    Qiao, J.
    Qian, J.
    EXPERIMENTAL TECHNIQUES, 2023, 47 (03) : 579 - 590
  • [29] Microstructure and Mechanical Property of Fillet Welded Joint by Stationary Shoulder Friction Stir Welding for 2A14 Aluminum Alloy Thick-plate
    Yan X.
    Yang X.
    Tang W.
    Zhao H.
    Guo L.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2022, 58 (22): : 186 - 197
  • [30] Friction stir lap welding of light alloy sheets
    Cojocaru, Radu
    Botila, Lia
    Ciuca, Cristian
    Dascau, Horia
    Verbitchi, Victor
    STRUCTURAL INTEGRITY OF WELDED STRUCTURES, 2013, 814 : 187 - 192
12345