The mechanism of intragranular ferrite formed on Ti-rich (Ti,V)(C,N) precipitates in the coarse heat affected zone of a V-N-Ti microalloyed steel

被引:30
|
作者
Shi, Zhongran [1 ,2 ]
Chai, Xiyang [2 ]
Chai, Feng [2 ]
Su, Hang [2 ]
Pan, Tao [2 ]
Wang, Qingfeng [1 ]
Wang, Ruizhen [2 ]
Yang, Caifu [2 ]
机构
[1] Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Peoples R China
[2] Cent Iron & Steel Res Inst, Dept Struct Steels, Beijing 100081, Peoples R China
关键词
Simulated coarse heat affected zone; Intragranular ferrite; Complex precipitates; V-rich cap; ACICULAR FERRITE; HSLA STEELS; NUCLEATION; PARTICLES; AUSTENITE; BEHAVIOR;
D O I
10.1016/j.matlet.2016.04.033
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of Ti-rich (Ti,V)(C,N) precipitates on the evolution of intragranular ferrite in the coarse grain heated effected zone (CGHAZ) of V-N-Ti steel was systematically investigated via transmission electron microscopy. The coarse grain boundary ferrite, bainite, and ferritic side-plates in simulated CGHAZ were replaced by polygonal ferrite and acicular ferrite, when the nitrogen content was increased from 0.0044 wt% to 0.0094 wt%. In addition, the undissolved Ti-rich core acted as a nucleation site for the V-rich cap; the cap reached the critical size at which nucleation of intragranular ferrite occurs nucleation size of intragranular ferrite with the aid of the core. Owing to a cap-induced increase in the nucleation potency, the intragranular ferrite have formed on the Ti-rich (Ti,V)(C,N) hold the Baker-Nutting orientation relationship ((001)(IGF)//(001)((Ti,V)(C,N)), [110](IGF)//[100]((Ti,V)(C,N))). (c) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:266 / 270
页数:5
相关论文
共 50 条
  • [41] Observations of cleavage initiation at (Ti,V)(C,N) particles of heterogeneous composition in microalloyed steels
    Balart, MJ
    Davis, CL
    Strangwood, M
    SCRIPTA MATERIALIA, 2004, 50 (03) : 371 - 375
  • [42] Coarsening Behavior of the (Ti, Nb)(C, N) complex particle in a microalloyed steel weld heat-affected zone considering the critical particle size
    Moon, Joonoh
    Kim, Sanghoon
    Lee, Jongbong
    Lee, Changhee
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2007, 38A (11): : 2788 - 2795
  • [43] Calculation of phase equilibria between austenite and (Nb, Ti, V)(C, N) in microalloyed steels
    Inoue, K
    Ishikawa, N
    Ohnuma, I
    Ohtani, H
    Ishida, K
    ISIJ INTERNATIONAL, 2001, 41 (02) : 175 - 182
  • [44] Coarsening Behavior of the (Ti, Nb)(C, N) Complex Particle in a Microalloyed Steel Weld Heat-Affected Zone Considering the Critical Particle Size
    Joonoh Moon
    Sanghoon Kim
    Jongbong Lee
    Changhee Lee
    Metallurgical and Materials Transactions A, 2007, 38 : 2788 - 2795
  • [45] C和N含量对V-N-Ti微合金非调质钢组织的影响
    王安东
    刘国权
    杨才福
    向嵩
    韩庆礼
    材料热处理学报, 2007, (05) : 51 - 56
  • [46] Austenite Grain Growth in Heat Affected Zone of Zr-Ti Bearing Microalloyed Steel
    Zheng L.
    Yuan Z.-X.
    Song S.-H.
    Xi T.-H.
    Wang Q.
    Journal of Iron and Steel Research International, 2012, 19 (2) : 73 - 78
  • [47] Austenite Grain Growth in Heat Affected Zone of Zr-Ti Bearing Microalloyed Steel
    ZHENG Lei1
    2. School of Materials and Metallurgy
    3. Research and Development Center
    Journal of Iron and Steel Research(International), 2012, 19 (02) : 73 - 78
  • [48] Austenite Grain Growth in Heat Affected Zone of Zr-Ti Bearing Microalloyed Steel
    Zheng Lei
    Yuan Ze-xi
    Song Shen-hua
    Xi Tian-hui
    Wang Qian
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2012, 19 (02) : 73 - 78
  • [49] Crystallography of intragranular ferrite formed on (MnS + V(C, N)) complex precipitate in austenite
    Miyamoto, G
    Shinyoshi, T
    Yamaguchi, J
    Furuhara, T
    Maki, T
    Uemori, R
    SCRIPTA MATERIALIA, 2003, 48 (04) : 371 - 377
  • [50] Microstructure and mechanical properties of V–Ti–N microalloyed steel used for fracture splitting connecting rod
    Xianzhong Zhang
    Qizhou Cai
    Guifeng Zhou
    Qingfeng Chen
    Yuzhang Xiong
    Journal of Materials Science, 2011, 46 : 1789 - 1795