Box-Behnken Analysis Of Surface Modification Of Aluminium Alloy AA6061 Using Roller Burnishing

被引：1

作者：

Kumar, Sunil ^{[1
]}

Maity, Saikat Ranjan ^{[1
]}

Patnaik, Lokeswar ^{[1
]}

机构：

[1] Natl Inst Technol, Dept Mech Engn, Silchar- 788010, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷

关键词：

Box-Behnken; Design of Experiment; Speed; feed; surface roughness and micro hardness; BALL; ROUGHNESS; OPTIMIZATION; PARAMETERS; MECHANICS; CONTACT; QUALITY; ELEMENT;

D O I：

10.1016/j.matpr.2019.07.445

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Burnishing is a surface modification process for any kind of ferrous, non-ferrous and ceramic materials. It improves the smoothness of surface, increase micro hardness, wear resistance and fatigue resistance of the surface. In this study, peripheral surface of the workpiece has been targeted, which is rotated by means of lathe spindle. Roller is rotating and sliding on to the peripheral surface with some load. This experimental investigation is carried out on to the Aluminium-based alloy workpiece to investigate surface characteristics such as surface roughness and micro hardness before burnishing and after burnishing. There are three significant parameters such as speed, feed rate and number of tool pass have been contemplated. Box- Behnken design of experiment is opted for the purpose. The burnishing speed and number of pass are the most consequential parameter whereas feed rate has less effect on the surface roughness and micro hardness. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：4613 / 4621

页数：9

共 50 条

[21] Modelling Temperature and Strain-Rate Dependence of Recycled Aluminium Alloy AA6061
Ho, C. S.
Nor, M. K. Mohd
Samad, M. S. A.
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2022, 14 (06): : 135 - 145
[22] Machinability of cenosphere particulate-reinforced AA6061 aluminium alloy prepared by compocasting
Rahman, Mujibur
Dey, Abhijit
Pandey, Krishna Murari
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (14) : 2499 - 2509
[23] Dynamic recrystallisation and dynamic precipitation in AA6061 aluminium alloy during hot deformation
Fan, X. H.
Li, M.
Li, D. Y.
Shao, Y. C.
Zhang, S. R.
Peng, Y. H.
MATERIALS SCIENCE AND TECHNOLOGY, 2014, 30 (11) : 1263 - 1272
[24] Study on the Comparition of Properties between SPMIG and DPMIG welding of AA6061 aluminium alloy
Liao Tianfa
Xue Jiaxiang
2017 10TH INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTATION TECHNOLOGY AND AUTOMATION (ICICTA 2017), 2017, : 433 - 437
[25] Development and characterization of AA6061 aluminium alloy/clay and rice husk ash composite
Olusesi, O. S.
Udoye, N. E.
MANUFACTURING LETTERS, 2021, 29 : 34 - 41
[26] Friction Stir Welding of three dissimilar aluminium alloy: AA2024, AA6061 and AA7075
Bosneag, A.
Constantin, M. A.
Nitu, E.
Iordache, M.
MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VI (MODTECH 2018), 2018, 400
[27] Prediction of cutting force and surface roughness using Taguchi technique for aluminum alloy AA6061
Yahya, Elssawi
Ding, Guofu
Qin, Shengfeng
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2016, 14 (03) : 151 - 160
[28] An analysis on effect of multipass twist extrusion process of AA6061 alloy
Iqbal, U. Mohammed
Kumar, V. S. Senthil
MATERIALS & DESIGN, 2013, 50 : 946 - 953
[29] Parametric Optimisation of Heat Treated Recycling Aluminium (AA6061) by Response Surface Methodology
Ahmad, A.
Lajis, M. A.
Yusuf, N. K.
Shamsudin, S.
Zhong, Z. W.
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
[30] ANN Modeling and Analysis of Friction Welded AA6061 Aluminum Alloy
Vangalapati, Murali
Balaji, K.
Gopichand, A.
MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3357 - 3364

← 1 2 3 4 5 →