Box-Behnken Analysis Of Surface Modification Of Aluminium Alloy AA6061 Using Roller Burnishing

被引：1
|
作者：
Kumar, Sunil [1 ]
Maity, Saikat Ranjan [1 ]
Patnaik, Lokeswar [1 ]
机构：
[1] Natl Inst Technol, Dept Mech Engn, Silchar- 788010, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷
关键词：
Box-Behnken; Design of Experiment; Speed; feed; surface roughness and micro hardness; BALL; ROUGHNESS; OPTIMIZATION; PARAMETERS; MECHANICS; CONTACT; QUALITY; ELEMENT;
D O I：
10.1016/j.matpr.2019.07.445
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Burnishing is a surface modification process for any kind of ferrous, non-ferrous and ceramic materials. It improves the smoothness of surface, increase micro hardness, wear resistance and fatigue resistance of the surface. In this study, peripheral surface of the workpiece has been targeted, which is rotated by means of lathe spindle. Roller is rotating and sliding on to the peripheral surface with some load. This experimental investigation is carried out on to the Aluminium-based alloy workpiece to investigate surface characteristics such as surface roughness and micro hardness before burnishing and after burnishing. There are three significant parameters such as speed, feed rate and number of tool pass have been contemplated. Box- Behnken design of experiment is opted for the purpose. The burnishing speed and number of pass are the most consequential parameter whereas feed rate has less effect on the surface roughness and micro hardness. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：4613 / 4621
页数：9
相关论文
共 50 条
  • [1] Formability Analysis of AA6061 Aluminium Alloy at Room Temperature
    Loganathan, D.
    Gnanavelbabu, A.
    ADVANCED MANUFACTURING RESEARCH AND INTELLIGENT APPLICATIONS, 2014, 591 : 55 - +
  • [2] Galvanic corrosion of laser weldments of AA6061 aluminium alloy
    Rahman, A. B. M. Mujibur
    Kumar, S.
    Gerson, A. R.
    CORROSION SCIENCE, 2007, 49 (12) : 4339 - 4351
  • [3] Grain boundary segregation and precipitation in aluminium alloy AA6061
    De Haas, M.
    Van Scherpenzeel, S. M.
    De Hosson, J. Th. M.
    ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 467 - 472
  • [4] Mechanical properties of AA6061 aluminium alloy subjected to severe surface mechanical treatment
    Thirumavalavan, K.
    Karunamoorthy, L.
    Padmanabhan, K. A.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
  • [5] Sheet Metal Forming Analysis of Aluminium Alloy AA6061 using |Altair INSPIRE Form Simulation
    Tharazi, Izdihar
    Halim, Nurul Hayati Abdul
    Salleh, Farrahshaida Mohd
    Manurung, Yupiter H. P.
    Sabtu, Amirul Syazani
    Zulkifli, Zulaika
    Khalit, Muhammad Ilham
    JURNAL KEJURUTERAAN, 2024, 36 (03): : 1237 - 1247
  • [6] Experimental investigation on aluminium alloy AA6061 and AA8011 using friction stir welding
    Rao, S. Sandeep Kumar
    Babu, N. Girish
    Tej, B. Kamal
    Sashank, S. Sravan
    Suresh, J. Venkata
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 3269 - 3275
  • [7] Tribological behavior of friction stir processed AA6061 aluminium alloy
    Shaik, Dilkush
    Sudhakar, I
    Bharat, G. C. S. G.
    Varshini, V.
    Vikas, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 860 - 864
  • [8] Strain rate sensitivity of ultrafine grained aluminium alloy AA6061
    Vevecka-Priftaj, Aferdita
    Boehner, Andreas
    May, Johannes
    Hoeppel, Heinz Werner
    Goeken, Mathias
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION IV, PTS 1 AND 2, 2008, 584-586 : 741 - 747
  • [9] The role of silicon in the corrosion of AA6061 aluminium alloy laser weldments
    Rahman, A. B. M. Mujibur
    Kumar, Sunil
    Gerson, Andrea R.
    CORROSION SCIENCE, 2010, 52 (06) : 1969 - 1975
  • [10] Influence of roller burnishing contact width and burnishing orientation on surface quality and tribological behaviour of Aluminium 6061
    El-Tayeb, N. S. M.
    Low, K. O.
    Brevern, P. V.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 186 (1-3) : 272 - 278
12345