Development of high-permittivity glasses for microwave LTCC tapes

被引:0
|
作者
Eberstein, M [1 ]
Schiller, WA [1 ]
机构
[1] Bundesanstalt Mat Forscung & Prufung, Lab Funkt Keramik V42, D-12200 Berlin, Germany
来源
GLASS SCIENCE AND TECHNOLOGY | 2003年 / 76卷 / 01期
关键词
D O I
暂无
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
One of today's leading packaging concepts in microelectronics and microsystems is the technology of Low Temperature Cofiring Ceramics (LTCC). It is based on ceramic tapes that sinter at low temperatures (< 950 degrees C) and are capable of fine-line wiring by use of high-conductivity metals, preferably silver (theta(m) = 961 degrees C). To lower sintering temperatures of crystalline powders, glass powder is added. Depending on the amount of glass added, two mechanisms of sintering are possible: reactive or nonreactive liquid phase sintering. Reactive sintering requires small amounts (< 10 vol.%) of a very low softening glass (theta(soft) < 400 degrees C). If the glass amount is increased to more than 50 vol.%, nonreactive sintering occurs in the glass softening range. According to the microstructure observed for each case, the respective types of materials are called Glass Bonded Ceramics (GBC) and Glass Ceramic Composites (GCC). Integration of microwave filters in LTCC multilayers requires inner dielectric layers with medium, temperature-stable permittivities (epsilon(r) = 30 to 60) and low dielectric loss (tan delta < 2.10(-3)). Up to now, appropriate materials have been realized only by GBC sintering at 900degreesC and above. Hence, pure silver metallization is not possible. To overcome this limitation, GCC are a promising way. Therefore, crystalline substances possessing epsilon(t) of about 100 and low dielectric loss - for example Ba(La, Nd)(2)Ti(4)Ol(2) - were combined with special high-permittivity glasses. A development of such glasses is presented in this work. Addition of oxides of easily polarizable elements (e. g. Nb2O5, La2O3, TiO2) effects an increase in permittivity of selected basis compositions from the systems BaO-Al2O3-B2O3-SiO2 (epsilon(r) up to 15) and La2O3-Ba2O3-TiO2 (epsilon(r) up to 20). GCC mixtures made of 65 vol.% of these glasses and 35 vol.% BaLa2Ti4O12 showing microwave properties and sintering temperatures below 900degreesC are introduced.
引用
收藏
页码:8 / 16
页数:9
相关论文
共 50 条
  • [41] Electromagnetic Scattering by Networks of High-Permittivity Thin Wires
    Forestiere, Carlo
    Miano, Giovanni
    Miranda, Bruno
    PHYSICAL REVIEW APPLIED, 2021, 16 (01)
  • [42] A stacked patch antenna of very high-permittivity material
    Zhang, YP
    Ang, CWY
    Lee, CSC
    Do, MA
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2000, 27 (06) : 395 - 396
  • [43] Control of microwave dielectric properties of CaTiO3-based high-permittivity ceramics using additives
    Kipkoech, Erick Rop
    Zhu, Jianhua
    Lu, Wenzhong
    JOURNAL OF APPLIED PHYSICS, 2006, 100 (05)
  • [44] Resonance continuum coupling in high-permittivity dielectric metamaterials
    Lepetit, Thomas
    Akmansoy, Eric
    Ganne, Jean-Pierre
    Lourtioz, Jean-Michel
    PHYSICAL REVIEW B, 2010, 82 (19)
  • [46] DESIGN OF HIGH-PERMITTIVITY RECTANGULAR DIELECTRIC RESONATOR ANTENNA
    Madhuri, R. G.
    Hadalgi, P. M.
    Hunagund, P. V.
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2011, 53 (05) : 1077 - 1079
  • [47] Effective dielectric function in high-permittivity ceramics and films
    Petzelt, J
    Rychetsky, I
    FERROELECTRICS, 2005, 316 : 89 - 95
  • [48] High-Permittivity Polysiloxanes for Bright, Stretchable Electroluminescent Devices
    von Szczepanski, Johannes
    Wolf, Jana
    Hu, Wei-Hsu
    Schneider, Rene
    Danner, Patrick M.
    Kupferschmid, Andre
    Jenatsch, Sandra
    Hany, Roland
    Nuesch, Frank A.
    Opris, Dorina M.
    ADVANCED OPTICAL MATERIALS, 2024, 12 (18)
  • [49] Integrated-circuit antenna for high-permittivity substrates
    Kot, JS
    Nikolic, N
    Bird, TS
    IEE PROCEEDINGS-MICROWAVES ANTENNAS AND PROPAGATION, 1997, 144 (01) : 47 - 51
  • [50] Comparison of Two AMC's on a High-Permittivity Substrate
    Mackenzie, Anne I.
    2015 31st International Review of Progress in Applied Computational Electromagnetics (ACES) Vol 31, 2015,