Development of high-permittivity glasses for microwave LTCC tapes

被引:0
|
作者
Eberstein, M [1 ]
Schiller, WA [1 ]
机构
[1] Bundesanstalt Mat Forscung & Prufung, Lab Funkt Keramik V42, D-12200 Berlin, Germany
来源
GLASS SCIENCE AND TECHNOLOGY | 2003年 / 76卷 / 01期
关键词
D O I
暂无
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
One of today's leading packaging concepts in microelectronics and microsystems is the technology of Low Temperature Cofiring Ceramics (LTCC). It is based on ceramic tapes that sinter at low temperatures (< 950 degrees C) and are capable of fine-line wiring by use of high-conductivity metals, preferably silver (theta(m) = 961 degrees C). To lower sintering temperatures of crystalline powders, glass powder is added. Depending on the amount of glass added, two mechanisms of sintering are possible: reactive or nonreactive liquid phase sintering. Reactive sintering requires small amounts (< 10 vol.%) of a very low softening glass (theta(soft) < 400 degrees C). If the glass amount is increased to more than 50 vol.%, nonreactive sintering occurs in the glass softening range. According to the microstructure observed for each case, the respective types of materials are called Glass Bonded Ceramics (GBC) and Glass Ceramic Composites (GCC). Integration of microwave filters in LTCC multilayers requires inner dielectric layers with medium, temperature-stable permittivities (epsilon(r) = 30 to 60) and low dielectric loss (tan delta < 2.10(-3)). Up to now, appropriate materials have been realized only by GBC sintering at 900degreesC and above. Hence, pure silver metallization is not possible. To overcome this limitation, GCC are a promising way. Therefore, crystalline substances possessing epsilon(t) of about 100 and low dielectric loss - for example Ba(La, Nd)(2)Ti(4)Ol(2) - were combined with special high-permittivity glasses. A development of such glasses is presented in this work. Addition of oxides of easily polarizable elements (e. g. Nb2O5, La2O3, TiO2) effects an increase in permittivity of selected basis compositions from the systems BaO-Al2O3-B2O3-SiO2 (epsilon(r) up to 15) and La2O3-Ba2O3-TiO2 (epsilon(r) up to 20). GCC mixtures made of 65 vol.% of these glasses and 35 vol.% BaLa2Ti4O12 showing microwave properties and sintering temperatures below 900degreesC are introduced.
引用
收藏
页码:8 / 16
页数:9
相关论文
共 50 条
  • [1] MEASUREMENTS OF HIGH-PERMITTIVITY MATERIALS IN THE MICROWAVE REGION
    KLIGER, M
    ZAGRODZINSKI, J
    ARCHIV FUR ELEKTRONIK UND UBERTRAGUNGSTECHNIK, 1972, 26 (05): : 243 - +
  • [2] Thermal Stability Mechanisms in High-Permittivity Microwave Dielectrics
    Poplavko, Yuriy
    2021 IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS (IEEE ISAF 2021) / INTERNATIONAL SYMPOSIUM ON INTEGRATED FUNCTIONALITIES (ISIF) / PIEZORESPONSE FORCE MICROSCOPY WORKSHOP (PFM), 2021,
  • [3] High-permittivity thin films for tunable microwave circuits
    Stemmer, Susanne
    Lu, Jiwei
    Finstrom, Nicholas H.
    Park, Jaehoon
    Keane, Sean P.
    Pervez, Nadia K.
    Schmidt, Steffen
    Boesch, Damien S.
    Jalan, Bharat
    Klenov, Dmitri O.
    Cagnon, Joel
    York, Robert A.
    2007 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM, VOLS 1-12, 2007, : 1578 - +
  • [4] THEORETICAL DERIVATION OF POSSIBLE DIELECTRIC ANOMALIES IN HIGH-PERMITTIVITY GLASSES
    LINES, ME
    PHYSICAL REVIEW B, 1978, 17 (04): : 1984 - 1990
  • [5] Planar SIR microwave bandpass filter using high-permittivity ceramics
    Huang, CL
    Yen, PY
    Weng, MH
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2000, 26 (06) : 410 - 413
  • [6] Microwave component miniaturization by local embedding high-permittivity dielectric materials in low-permittivity substrates
    Semouchkina, E
    Baker, A
    Semouchkin, G
    Lanagan, M
    34TH EUROPEAN MICROWAVE CONFERENCE, VOLS 1-3, CONFERENCE PROCEEDINGS, 2004, : 1225 - 1228
  • [7] Production of large-diameter microwave plasma with a high-permittivity material window
    Furukawa, M
    Saito, N
    Kawamura, K
    Koromogawa, T
    Shindo, H
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 1998, 37 (8B): : L1005 - L1007
  • [8] HIGH-PERMITTIVITY TEMPERATURE-STABLE CERAMIC DIELECTRICS WITH LOW MICROWAVE LOSS
    KELL, RC
    GREENHAM, AC
    OLDS, GCE
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1973, 56 (07) : 352 - 354
  • [9] Measurement of High-Permittivity Dielectric Characteristics at Microwave and mm-wave Frequencies
    Hong, Young-Pyo
    Koo, Hyunji
    Salter, Martin J.
    2016 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM 2016), 2016,
  • [10] Surface wave plasma production employing high-permittivity material for microwave window
    Kusaba, K
    Shinagawa, K
    Furukawa, M
    Kawamura, K
    Shindo, H
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 2001, 40 (11A): : L1179 - L1182