Effects of Water Exposure on the Interfacial Bond between an Epoxy Resin Coating and a Concrete Substrate

被引：20
|
作者：
Won, Boreum [1 ,2 ]
Kim, Min Ook [2 ]
Park, Sangmin [2 ]
Yi, Jin-Hak [2 ]
机构：
[1] Korea Maritime & Ocean Univ, Sch Ocean Sci & Technol, Busan 49112, South Korea
[2] Korea Inst Ocean Sci & Technol, Coastal Dev & Ocean Energy Res Ctr, Busan 49111, South Korea
来源：
MATERIALS | 2019年 / 12卷 / 22期
关键词：
underwater application; epoxy resin coating; concrete substrate; interfacial bond; coating equipment; submerged structures; CHLORIDE DIFFUSION-COEFFICIENT; REINFORCED-CONCRETE; SURFACE-TREATMENT; PERFORMANCE; CORROSION; PROTECTION; CRACKING; COVER;
D O I：
10.3390/ma12223715
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Interfacial bond properties of six different epoxy resins used to coat submerged concrete structures were investigated. Test variables included coating type, coating equipment, and underwater curing time. Coating thickness and pull-off bond strength were measured using commercially available test equipment. Coating thickness and bond strength varied greatly depending on the manufacturer. The standard (control) coating equipment positively influenced the bond strength compared to other equipment. The effect of curing time on the bond properties was not significant within the range of 24 to 72 h. Lastly, some important considerations for the underwater coating of actual marine and coastal concrete structures were discussed, and suggestions for future research are presented.
引用
收藏
页数：12
相关论文
共 50 条
  • [31] Superficial protection of concrete with epoxy resin impregnations: influence of the substrate roughness and moisture
    Liliana Baltazar
    João Santana
    Beatriz Lopes
    João R. Correia
    M. Paula Rodrigues
    Materials and Structures, 2015, 48 : 1931 - 1946
  • [32] Superficial protection of concrete with epoxy resin impregnations: influence of the substrate roughness and moisture
    Baltazar, Liliana
    Santana, Joao
    Lopes, Beatriz
    Correia, Joao R.
    Paula Rodrigues, M.
    MATERIALS AND STRUCTURES, 2015, 48 (06) : 1931 - 1946
  • [33] Density-Functional Tight-Binding Study on the Effects of Interfacial Water in the Adhesion Force between Epoxy Resin and Alumina Surface
    Yoshizawa, Kazunari
    Murata, Hiroyuki
    Tanaka, Hiromasa
    LANGMUIR, 2018, 34 (47) : 14428 - 14438
  • [34] Bond between microwave cured repair and concrete substrate
    Grigoriadis, Konstantinos
    Mangat, P. S.
    Abubakri, Shahriar
    MATERIALS AND STRUCTURES, 2017, 50 (02)
  • [35] Testing the bond between repair materials and concrete substrate
    AbuTair, AI
    Rigden, SR
    Burley, E
    ACI MATERIALS JOURNAL, 1996, 93 (06) : 553 - 558
  • [36] Investigation of the Bond between Concrete Substrate and ECC Overlays
    Sahmaran, Mustafa
    Yucel, Hasan E.
    Yildirim, Gurkan
    Al-Emam, Muhannad
    Lachemi, Mohamed
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2014, 26 (01) : 167 - 174
  • [37] Demonstration test on concrete with epoxy resin coating using ultra-high pressure water jet decontamination technology
    Tagawa, Akihiro
    Tezuka, Masashi
    Terakura, Yoshihiro
    Naitou, Masayuki
    Miyazima, Kenji
    PROCEEDINGS OF THE 21ST INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING - 2013, VOL 5, 2014,
  • [38] Bond between microwave cured repair and concrete substrate
    Konstantinos Grigoriadis
    P. S. Mangat
    Shahriar Abubakri
    Materials and Structures, 2017, 50
  • [39] Testing the bond between repair materials and concrete substrate
    ACI Mater J, 6 (553-558):
  • [40] The structure of interfacial layer between the metallic coating and the polymer substrate
    Panchuk D.A.
    Sadakbaeva Zh.K.
    Puklina E.A.
    Bol'Shakova A.V.
    Abramchuk S.S.
    Yarysheva L.M.
    Volynskii A.L.
    Bakeev N.F.
    Nanotechnologies in Russia, 2009, 4 (5-6): : 340 - 348
12345