Optimization of parameters for deposition of In2S3 films by spray pyrolysis using Taguchi method

被引：4
|
作者：
Elfarrass, S. [1 ,2 ]
Hartiti, B. [1 ]
Ridah, A. [2 ]
Thevenin, P. [3 ]
机构：
[1] Univ Hassan II FSTM, Dept Phys, ANEPMAER Grp, MAC & PM Lab, Mohammadia, Morocco
[2] Univ Hassan II FSB, Dept Phys, LIMAT Lab, Casablanca, Morocco
[3] Univ Lorraine, LMOPS Lab, Metz, France
来源：
MOLECULAR CRYSTALS AND LIQUID CRYSTALS | 2016年 / 628卷 / 01期
关键词：
Indium sulfide; Spray pyrolysis; Texture coefficient; Taguchi method; SULFIDE THIN-FILMS;
D O I：
10.1080/15421406.2015.1137151
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The aim of this research is to investigate the influence of the experimental conditions on the structural, morphological and optical properties of Indium Sulfide thin films deposition according to the Taguchi analysis method. The films are deposited on a glass substrate by spray pyrolysis a deposition method which is dependent on the concentrations of the precursor (indium and sulfide), the substrate temperature and the duration of the process. These four parameters are the key factors to be optimized in our study in conjunction with the morphological and optical properties of the films thanks to the Taguchi analysis, using a L-9 Orthogonal array.
引用
收藏
页码：139 / 144
页数：6
相关论文
共 50 条
  • [21] Influence of annealing temperature on the properties of In2S3:Sn films deposited by spray pyrolysis
    M. Kraini
    N. Bouguila
    J. El Ghoul
    I. Halidou
    S. A. Gomez-Lopera
    C. Vázquez-Vázquez
    M. A. López-Quintela
    S. Alaya
    Journal of Materials Science: Materials in Electronics, 2015, 26 : 5774 - 5782
  • [22] Study of Optical and Electrical Properties of In2S3:Sn Films Deposited by Spray Pyrolysis
    M. Kraini
    N. Bouguila
    I. Halidou
    A. Moadhen
    C. Vázquez-Vázquez
    M.A. López-Quintela
    S. Alaya
    Journal of Electronic Materials, 2015, 44 : 2536 - 2543
  • [23] The effects of growth parameters on electrical characteristics of In2S3/n-InP junctions with In2S3 interfacial layer obtained by chemical spray pyrolysis method
    Cakici, Tuba
    Saglam, Mustafa
    MATERIALS TODAY-PROCEEDINGS, 2016, 3 (05) : 1262 - 1270
  • [24] Study of Optical and Electrical Properties of In2S3:Sn Films Deposited by Spray Pyrolysis
    Kraini, M.
    Bouguila, N.
    Halidou, I.
    Moadhen, A.
    Vazquez-Vazquez, C.
    Lopez-Quintela, M. A.
    Alaya, S.
    JOURNAL OF ELECTRONIC MATERIALS, 2015, 44 (07) : 2536 - 2543
  • [25] Spray pyrolysis deposition of Sn2S3 thin films
    Lopez, S
    Granados, S
    Ortiz, A
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 1996, 11 (03) : 433 - 436
  • [26] Optimization of Robotic Spray Painting process Parameters using Taguchi Method
    Chidhambara, K. V.
    Shankar, B. Latha
    Vijaykumar
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2017), 2018, 310
  • [27] Determination of the optimal conditions for the deposition of Cu2ZnSnS4 (CZTS) thin films by Spray Pyrolysis using Taguchi method
    Arba, Youssef
    Nkuissi Tchognia, Joel Herve
    Hartiti, Bouchaib
    Ridah, Abderraouf
    Thevenin, Philippe
    2014 INTERNATIONAL RENEWABLE AND SUSTAINABLE ENERGY CONFERENCE (IRSEC), 2014, : 705 - 710
  • [28] STUDIES ON DEPOSITION OF FE2O3 FILMS BY SPRAY PYROLYSIS METHOD
    PAWAR, SK
    PAWAR, SH
    MATERIALS RESEARCH BULLETIN, 1983, 18 (02) : 211 - 215
  • [29] Impact of carrier gas pressures in the formation of (103) oriented In2S3 nanocrystalline thin films by Nebulized Spray Pyrolysis method
    S. Sahul Hameed
    B. Balayazhini
    L. Amalraj
    S. Syed Zahirullah
    J. Raj Mohamed
    Journal of Materials Science: Materials in Electronics, 2023, 34
  • [30] Impact of carrier gas pressures in the formation of (103) oriented In2S3 nanocrystalline thin films by Nebulized Spray Pyrolysis method
    Hameed, S. Sahul
    Balayazhini, B.
    Amalraj, L.
    Zahirullah, S. Syed
    Mohamed, J. Raj
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2023, 34 (01)
12345