Gradient Microstructure, Mechanical Properties and Phase Composition of Ni-Cr-Fe Alloy under Additive Manufacturing Process

被引：0
|
作者：
Rashkovets, M., V [1 ]
Nikulina, A. A. [1 ]
Klimova-Korsmik, O. G. [2 ,3 ]
Kislov, N. G. [2 ,3 ]
Matts, O. E. [1 ]
机构：
[1] Novosibirsk State Tech Univ, Novosibirsk 630073, Russia
[2] St Petersburg State Marine Tech Univ, St Petersburg 190121, Russia
[3] Peter Great St Petersburg Polytech Univ, St Petersburg 195251, Russia
来源：
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY | 2020年 / 2310卷
关键词：
D O I：
10.1063/5.0034445
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The present study is about 52Ni-19.2Cr-18.7Fe-5.5Nb alloy formed by additive manufacturing process of High-speed direct laser deposition. The microstructure and phase composition were studied with optical microscopy and TEM. Three different areas of deposited layers are presented by columnar dendrite grains, equiaxed structure, and dendrite grains with secondary arm spacing. The increase in heat input showed a slightly improved in average microhardness of the deposited samples. The results of TEM study showed the presence of different Laves phase morphologies depending on heat input.
引用
收藏
页数：5
相关论文
共 50 条
  • [21] PRECIPITATION OF ALPHA'-PHASE IN NI-CR-FE OVERLAY WELD ALLOY WITH DISPERSED NBC PARTICLES
    TOMITA, T
    TAKATANI, Y
    HASHIZUME, G
    HARADA, Y
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1992, 56 (09) : 1013 - 1019
  • [22] ADDITIVE MANUFACTURING OF FE-MN-AL-NI SHAPE MEMORY ALLOY: MICROSTRUCTURE AND PHASE TRANSFORMATION CHARACTERISTICS
    Algamal, Anwar
    Alhamdi, Ismail
    Ali, Majed
    Almotari, Abdalmageed
    Gandhi, Umesh
    Qattawi, Ala
    PROCEEDINGS OF ASME 2023 CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, SMASIS2023, 2023,
  • [23] Induced porosity in Super Alloy 718 through the laser additive manufacturing process: Microstructure and mechanical properties
    Valdez, Mario
    Kozuch, Christopher
    Faierson, Eric J.
    Jasiuk, Iwona
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 725 : 757 - 764
  • [24] Influence of Fe on Microstructure and Mechanical Properties in Pdoped Ni–Cr–Fe Alloys
    Xin-Tong Lian
    Wen-Ru Sun
    Xin Xin
    Fang Liu
    Dan-Dan Zheng
    ActaMetallurgicaSinica(EnglishLetters), 2019, 32 (06) : 771 - 779
  • [25] Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties
    Gujba, Abdullahi K.
    Medraj, Mamoun
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
  • [26] Phase constitution, microstructure and mechanical properties of a Ni-based superalloy specially designed for additive manufacturing
    Bin Wu
    Jing-jing Liang
    Yan-hong Yang
    Jin-guo Li
    Yi-zhou Zhou
    China Foundry, 2021, 18 : 397 - 408
  • [27] Phase constitution,microstructure and mechanical properties of a Ni-based superalloy specially designed for additive manufacturing
    Bin Wu
    Jing-jing Liang
    Yan-hong Yang
    Jin-guo Li
    Yi-zhou Zhou
    China Foundry, 2021, 18 (04) : 397 - 408
  • [28] Phase constitution, microstructure and mechanical properties of a Ni-based superalloy specially designed for additive manufacturing
    Wu, Bin
    Liang, Jing-jing
    Yang, Yan-hong
    Li, Jin-guo
    Zhou, Yi-zhou
    CHINA FOUNDRY, 2021, 18 (04) : 397 - 408
  • [29] Effect of Solidification Behavior on Microstructures and Mechanical Properties of Ni-Cr-Fe Superalloy Investment Casting
    Kang, Maodong
    Wang, Jun
    Gao, Haiyan
    Han, Yanfeng
    Wang, Guoxiang
    He, Shuxian
    MATERIALS, 2017, 10 (03):
  • [30] Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical properties
    Zeng, Z.
    Cong, B. Q.
    Oliveira, J. P.
    Ke, W. C.
    Schell, N.
    Peng, B.
    Qi, Z. W.
    Ge, F. G.
    Zhang, W.
    Ao, S. S.
    ADDITIVE MANUFACTURING, 2020, 32
12345