Aerosol Deposition of Ba0.8Sr0.2TiO3 Thin Films

被引：3

作者：

Brankovic, Z. ^{[1
]}

Brankovic, G. ^{[1
]}

Tucic, A. ^{[1
]}

Radojkovic, A. ^{[1
]}

Longo, E. ^{[2
]}

Varela, J. A. ^{[2
]}

机构：

[1] Inst Multidisciplinary Res, Belgrade 11030, Serbia

[2] UNESP, Inst Quim, BR-14801970 Araraquara, SP, Brazil

来源：

SCIENCE OF SINTERING | 2009年 / 41卷 / 03期

关键词：

Thin films; Aerosol deposition; Barium Strontium Titanate; Roughness; SPRAY-PYROLYSIS; MICROSTRUCTURE;

D O I：

10.2298/SOS0903303B

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this work we optimized conditions for aerosol deposition of homogeneous, nano-grained, smooth Ba0.8Sr0.2TiO3 thin films. Investigation involved optimization of deposition parameters, namely deposition time and temperature for different substrates. Solutions were prepared from titanium isopropoxide, strontium acetate and barium acetate. Films were deposited on Si (1 0 0) or Si covered by platinum (Pt (1 1 1) /Ti/SiO2/Si). Investigation showed that the best films were obtained at substrate temperature of 85 degrees C. After deposition films were slowly heated up to 650 degrees C, annealed for 30 min, and slowly cooled. Grain size of BST films deposited on Si substrate were in the range 40-70 nm, depending on deposition conditions, while the same films deposited on Pt substrates showed mean grain size in the range 35-50 nm. Films deposited under optimal conditions were very homogeneous, crack-free, and smooth with rms roughness lower than 4 nm for both substrates.

引用

页码：303 / 308

页数：6

共 50 条

[41] The effect of thermal treatment on PLD derived Ba0.8Sr0.2TiO3 thin film capacitor
Xing, S
Song, ZT
Lin, CG
SOLID-STATE AND INTEGRATED-CIRCUIT TECHNOLOGY, VOLS 1 AND 2, PROCEEDINGS, 2001, : 714 - 717
[42] Low-frequency internal friction in ferroelectric Ba0.8Sr0.2TiO3 and Ba0.8Sr0.2TiO3+0.2 mass. % La ceramics
Gridnev, S. A.
Popov, I. I.
Kashirin, M. A.
Bocharov, A., I
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 889
[43] Effects of oxygen partial pressure on the ferroelectric properties of pulsed laser deposited Ba0.8Sr0.2TiO3 thin films
J. P. B. Silva
K. C. Sekhar
A. Almeida
J. Agostinho Moreira
M. Pereira
M. J. M. Gomes
Applied Physics A, 2013, 113 : 817 - 824
[44] Effects of oxygen partial pressure on the ferroelectric properties of pulsed laser deposited Ba0.8Sr0.2TiO3 thin films
Silva, J. P. B.
Sekhar, K. C.
Almeida, A.
Agostinho Moreira, J.
Pereira, M.
Gomes, M. J. M.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2013, 113 (03): : 817 - 824
[45] Improved dielectric properties and their temperature insensitivity in multilayered Ba0.8Sr0.2TiO3/ZrO2 thin films
Sahoo, S. K.
Misra, D.
Sahoo, M.
MacDonald, C. A.
Bakhru, H.
Agrawal, D. C.
Mohapatra, Y. N.
Majumder, S. B.
Katiyar, R. S.
JOURNAL OF APPLIED PHYSICS, 2011, 109 (06)
[46] Optical Characteristics of Pulsed Laser Deposited Ba0.8Sr0.2TiO3 Thin Films Grown on Fused Quartz Substrate
Roy, N.
Nath, M.
Roy, A.
Ray, S. K.
Dhar, A.
INDIAN VACUUM SOCIETY SYMPOSIUM ON THIN FILMS: SCIENCE & TECHNOLOGY, 2012, 1451 : 139 - 141
[47] Light-controlled resistive switching in laser-assisted annealed Ba0.8Sr0.2TiO3 thin films
Silva, J. P. B.
Kamakshi, Koppole
Sekhar, K. C.
Moreira, J. Agostinho
Almeida, A.
Pereira, M.
Gomes, M. J. M.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2016, 213 (04): : 1082 - 1087
[48] Low-temperature fabrication of pyroelectric Ba0.8Sr0.2TiO3 thin films by a sol-gel process
Cheng, JG
Tang, J
Guo, SL
Chu, JH
JOURNAL OF MATERIALS RESEARCH, 2001, 16 (03) : 778 - 783
[49] Conductivity and photoconductivity of Ba0.8Sr0.2TiO3/LaMnO3 heterostructure
Chibirev, A. O.
Leontyev, A. V.
Garif'yanov, N. N.
Mamin, R. F.
FERROELECTRICS, 2023, 605 (01) : 21 - 26
[50] Photoinduced resistance of Ba0.8Sr0.2TiO3/LaMnO3 heterostructure
Leontyev, A., V
Zharkov, D. K.
Pavlov, D. P.
Shulyaev, D. A.
Mamin, R. F.
Kabanov, V. V.
FERROELECTRICS, 2021, 575 (01) : 18 - 23

← 1 2 3 4 5 →