Research on Vibration Control of Seating System Platform Based on the Cubic Stewart Parallel Mechanism

被引：8
|
作者：
Bi, Fengrong [1 ]
Ma, Teng [1 ]
Wang, Xu [2 ]
Yang, Xiao [1 ]
Lv, Zhenpeng [1 ]
机构：
[1] Tianjin Univ, State Key Lab Engines, Tianjin 300072, Peoples R China
[2] RMIT Univ, Sch Engn, Melbourne, Vic 3001, Australia
来源：
IEEE ACCESS | 2019年 / 7卷
关键词：
Vibrations; Legged locomotion; Vibration control; Roads; Tires; Jacobian matrices; Suspensions (mechanical systems); Multi-degree-of-freedom vibration control; cubic Stewart parallel mechanism; sensitivity analysis; active vibration control; SUPPRESSION; SUSPENSION; ISOLATOR;
D O I：
10.1109/ACCESS.2019.2948785
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
A multi-degree-of-freedom seating system platform based on the cubic Stewart parallel mechanism is designed for vibration control of an off-road vehicle drivers seat. A parameter sensitivity analysis is conducted to identify the most sensitive parameters for the transmissibility ratio of the seating system platform. Then, a vibration control method combining active and passive control for each branch of the seat platform leg is developed to reduce the drivers body vibration. The results indicate that the seating system platform designed in this article can reduce the vibration in the vertical direction, horizontal direction and roll direction simultaneously through passive vibration control. The vibration can be further reduced in these three directions by adding active vibration control.
引用
收藏
页码：155637 / 155649
页数：13
相关论文
共 50 条
  • [1] On vibration control with Stewart parallel mechanism
    Gexue, R
    Qiuhai, L
    Ning, H
    Rendong, N
    Bo, P
    MECHATRONICS, 2004, 14 (01) : 1 - 13
  • [2] Design of Control System for Vibration Isolation Platform Based on Parallel Mechanism
    Wang, Shuai
    Niu, Ruochen
    Li, Bing
    Huang, Hailin
    2017 IEEE 7TH ANNUAL INTERNATIONAL CONFERENCE ON CYBER TECHNOLOGY IN AUTOMATION, CONTROL, AND INTELLIGENT SYSTEMS (CYBER), 2017, : 1603 - 1608
  • [3] Research on design and control method of active vibration isolation system based on piezoelectric Stewart platform
    Fang, Zhiyi
    Yu, Zhiliang
    Huang, Qingping
    Wang, Yanfen
    Gu, Xingsheng
    SCIENTIFIC REPORTS, 2025, 15 (01):
  • [4] Micro-vibration active control for a Stewart platform with a cubic configuration
    Wang C.
    Liu X.
    Zhang Z.
    Zhang, Zhiyi, 2017, Chinese Vibration Engineering Society (36): : 208 - 213
  • [5] Simulation and experimental analysis of the Stewart parallel mechanism for vibration control
    Qian, Z
    Hui, Z
    2003 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN AND CYBERNETICS, VOLS 1-5, CONFERENCE PROCEEDINGS, 2003, : 3548 - 3552
  • [6] Research on Multi-Dimensional Vibration Isolation Control System Based on a Parallel Mechanism
    Wang, Ying
    Miao, Zhihuai
    Yin, Xiangyang
    2017 IEEE INTERNATIONAL CONFERENCE ON INFORMATION AND AUTOMATION (IEEE ICIA 2017), 2017, : 1115 - 1120
  • [7] Vibration Isolation Concepts for Non-cubic Stewart Platform Using Modal Control
    Abbas, Hussain
    Hai, Huang
    PROCEEDINGS OF 2014 11TH INTERNATIONAL BHURBAN CONFERENCE ON APPLIED SCIENCES & TECHNOLOGY (IBCAST), 2014, : 158 - 162
  • [8] The stability analysis of the Gough-Stewart Parallel Mechanism on vibration control
    Ye, PQ
    Zhou, Q
    Duan, GH
    Ren, G
    2004 IEEE CONFERENCE ON ROBOTICS, AUTOMATION AND MECHATRONICS, VOLS 1 AND 2, 2004, : 248 - 252
  • [9] Neural network adaptive control of a Stewart mechanism-based active vibration isolation platform
    Ma, Jia
    Yang, Tao
    Hou, Zeng-Guang
    Tan, Min
    Kongzhi yu Juece/Control and Decision, 2009, 24 (08): : 1150 - 1155
  • [10] Cooperative control for vibration isolation and suppression based on Stewart platform
    Wang J.
    Kong Y.
    Huang H.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2019, 38 (07): : 186 - 194
12345