Effect of additives on mechanical properties of oxidation-resistant carbon/carbon composite fabricated by rapid CVD method

被引：30
|
作者：
Luo, RY [1 ]
Yang, Z
Li, LF
机构：
[1] Beijing Univ Aeronaut & Astronaut, Coll Sci, Beijing 100083, Peoples R China
[2] Northwestern Polytech Univ, Dept Mat Sci & Engn, Xian 710072, Peoples R China
来源：
CARBON | 2000年 / 38卷 / 15期
关键词：
carbon/carbon composites; chemical vapor deposition; mechanical properties;
D O I：
10.1016/S0008-6223(00)00084-1
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The optimum composition of additives was obtained by the orthogonal design test method for oxidation-resistant carbon/carbon composites (C/C) fabricated by the rapid CVD method. The effect of additives on mechanical properties was examined. The additives used in this test included silicon carbide, silicon nitride, and metal borides. Additives doped into the matrix of C/C increase not only the initial oxidation temperature from 400 to 657 degreesC (64%), but also its flexural strength from 121 to 254 MPa (110%), and flexural modulus from 25 to 45 GPa (96%). The increase of mechanical properties is considered to be due to the formation of a metallic carbon-boron compound in the microstructure. (C) 2000 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：2109 / 2115
页数：7
相关论文
共 50 条
  • [31] Effect of Oxidation on Fracture Toughness of a Carbon/Carbon Composite
    张程煜
    郭永
    Journal of Wuhan University of Technology(Materials Science), 2012, (05) : 944 - 947
  • [32] Effect of oxidation on fracture toughness of a carbon/carbon composite
    Zhang Chengyu
    Yan Kefei
    Qiao Shengru
    Li Mei
    Han Dong
    Guo Yong
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2012, 27 (05): : 944 - 947
  • [33] Tensile mechanical properties of carbon nanotube/epoxy composite fabricated by pultrusion of carbon nanotube spun yarn preform
    Shimamura, Yoshinobu
    Oshima, Kahori
    Tohgo, Keiichiro
    Fujii, Tomoyuki
    Shirasu, Keiichi
    Yamamoto, Go
    Hashida, Toshiyuki
    Goto, Ken
    Ogasawara, Toshio
    Naito, Kimiyoshi
    Nakano, Takayuki
    Inoue, Yoku
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, 62 : 32 - 38
  • [34] Effect of carbon additives on the electrochemical properties of AB5 graphite composite electrodes prepared by mechanical milling
    Aymard, L
    Lenain, C
    Courvoisier, L
    Salver-Disma, F
    Tarascon, JM
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1999, 146 (06) : 2015 - 2023
  • [35] Properties of oxidation resistant MoSi coating of carbon/carbon composites
    Northwestern Polytechnic Univ, Xi'an, China
    Fuhe Cailiao Xuebao, 3 (37-40):
  • [36] ZRPT3 AS A HIGH-TEMPERATURE, REFLECTIVE, OXIDATION-RESISTANT COATING FOR CARBON-CARBON COMPOSITES
    ALVEY, MD
    GEORGE, PM
    CARBON, 1991, 29 (4-5) : 523 - 530
  • [37] A SiC/Mo( Six , Al1-x ) 2 oxidation-resistant coating for carbon/carbon composites
    Wang Xiang-hui
    Weng Li
    Zhang Wei-gang
    NEW CARBON MATERIALS, 2014, 29 (02) : 126 - 131
  • [38] A Si-SiC Oxidation-resistant Coating for Carbon/Carbon Composites by Hot-pressing Reaction Technique
    Fu, Qiangang
    Cao, Cuiwei
    Li, Hejun
    Tao, Jun
    Li, Kezhi
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2014, 11 (02) : 342 - 349
  • [39] The Effect of Fibers Loading on the Mechanical Properties of Carbon Epoxy Composite
    Solomon, Blaise
    George, Davis
    Shunmugesh, K.
    T, Akhil K.
    POLYMERS & POLYMER COMPOSITES, 2017, 25 (03): : 237 - 240
  • [40] MECHANICAL PROPERTIES OF CVD CARBON INFILTRATED CARBON AND GRAPHITE FILAMENT WOUND CYLINDERS
    KOTLENSK.WV
    CAMPBELL, JC
    BAUER, DW
    SMITH, WH
    WARREN, JW
    CARBON, 1972, 10 (03) : 334 - &
12345