Thermal analysis of PCM-filled glass windows in hot summer and cold winter area

被引：12

作者：

Li, Shuhong ^{[1
]}

Zhou, Yingying ^{[1
]}

Zhong, Kecheng ^{[1
]}

Zhang, Xiaosong ^{[1
]}

Jin, Xing ^{[1
]}

机构：

[1] Southeast Univ, Sch Energy & Environm, Nanjing, Jiangsu, Peoples R China

来源：

INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES | 2016年 / 11卷 / 02期

关键词：

phase change materials; glass windows; FLUENT; thermal performance; surface temperature; BUILDINGS; STORAGE;

D O I：

10.1093/ijlct/ctt073

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Phase change material (PCM)-filled glass window was suitable for absorbing or releasing more heat than conventional glass window. Comparisons of thermal performance between PCM-filled glass windows and insulated glass windows (double glass windows filled with dry air and surrounded by sealing strips) were presented in this paper. A 3D unsteady model was built in FLUENT to obtain the internal and external surface temperature fluctuations of these windows in 48 h. Compared with insulated glass windows, thermal performance (especially the thermal regulation effect) of double glass windows filled with Na2SO4 center dot 10H(2)O was quite satisfactory in sunny days of summer, while double glass windows filled with CaCl2 center dot 6H(2)O had a better thermal performance in overcast and rainy days of summer. Because the phase change temperature of these PCM is higher than the ambient temperature in winter, the thermal regulation effects of them were not as good as expected.

引用

页码：275 / 282

页数：8

共 50 条

[21] Thermal comfort analysis in departure lounge at railway station in hot summer and cold winter zone
School of Energy Science and Engineering, Central South University, Changsha 410083, China
[J]. Tumu Jianzhu yu Huanjing Gongcheng, 2009, 5 (100-105):
[22] Researching Indoor Comfort of Teaching Buildings in Hot Summer and Cold Winter Area
Zhang, Qi
[J]. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON CHEMICAL, MATERIAL AND FOOD ENGINEERING, 2015, 22 : 587 - 591
[23] Thermal behavior of a PV panel integrated with PCM-filled metallic tubes: An experimental study
Waqas, Adeel
Jie, Ji
Xu, Lijie
[J]. JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2017, 9 (05)
[24] Thermal comfort in urban mountain parks in the hot summer and cold winter climate
Cheng, Bin
Gou, Zhonghua
Zhang, Fan
Feng, Qiushuang
Huang, Zefeng
[J]. SUSTAINABLE CITIES AND SOCIETY, 2019, 51
[25] Thermal bridges in building envelope in hot summer and cold winter areas of thinking
Zhang, Xinhua
Liu, Jianxin
Chen, Zirong
Wang, Xinsheng
Wang, Mengyun
Ning, Liqing
[J]. MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 2012, 117-119 : 1211 - 1214
[26] Thermal performance evaluation model for VDSF in hot summer and cold winter zone
Bi, Yuan
Chen, Youming
Zhou, Juan
Lu, Xiang
[J]. Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2015, 36 (07): : 1724 - 1730
[27] A clustering method with target supervision for the thermal climate division of residential buildings in the Hot Summer and Cold Winter Area of China
Wang, Zhiwei
Chen, Yao
Zhou, Man
Wu, Jin
Zhang, Menglu
[J]. JOURNAL OF BUILDING ENGINEERING, 2021, 43
[28] Modeling and analysis of a dual-channel solar thermal storage wall system with phase change material in hot summer and cold winter area
Xu, Lijie
Luo, Chenglong
Cai, Jingyong
Ji, Jie
Dai, Leyang
Yu, Bendong
Huang, Shengjuan
[J]. BUILDING SIMULATION, 2022, 15 (02) : 179 - 196
[29] Modeling and analysis of a dual-channel solar thermal storage wall system with phase change material in hot summer and cold winter area
Lijie Xu
Chenglong Luo
Jingyong Cai
Jie Ji
Leyang Dai
Bendong Yu
Shengjuan Huang
[J]. Building Simulation, 2022, 15 : 179 - 196
[30] Coupled Simulation and Analysis of Wind Environment around Residential Quarter in Hot Summer and Cold Winter Area in China
Jiang, XinBo
Yang, ChangZhi
Tang, Biao
Chen, Wei
[J]. ADVANCES IN ENVIRONMENTAL TECHNOLOGIES, PTS 1-6, 2013, 726-731 : 3627 - +

← 1 2 3 4 5 →