UV-Curable Acrylated Coating From Epoxidized Palm Oil

被引：4
|
作者：
Abd Rahman, Nurliyana [1 ]
Badri, Khairiah Haji [1 ,2 ]
Sallleh, Nik Ghazali Nik [3 ]
机构：
[1] Univ Kebangsaan Malaysia, Fac Sci & Technol, Sch Chem Sci & Food Technol, Bangi 43600, Malaysia
[2] Univ Kebangsaan Malaysia, Fac Sci & Technol, Polymer Res Ctr, Bangi 43600, Malaysia
[3] Nucl Agcy, Selangor 43000, Malaysia
来源：
2014 UKM FST POSTGRADUATE COLLOQUIUM: PROCEEDINGS OF THE UNIVERSITI KEBANGSAAN MALAYSIA, FACULTY OF SCIENCE AND TECHNOLOGY 2014 POSTGRADUATE COLLOQUIUM | 2014年 / 1614卷
关键词：
UV coating; acrylated palm oil; epoxy acrylate; RESINS;
D O I：
10.1063/1.4895237
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
The properties of coating film prepared from the incorporation of acrylated palm oil (EPOLA) in commercial epoxy acrylate have been studied. A series of different amount of EPOLA was mixed with commercial epoxy acrylate. The blended acrylates passed through UV light to produce a non-tacky film. The conversion of acrylate double bond was monitored by FTIR. The effect of EPOLA concentration onto coated films were investigated by determination of the pendulum hardness and gel content. The higher the amount of EPOLA, the lower the pendulum hardness and the gel content but to a level acceptable for usage in the high-end applications.
引用
收藏
页码：439 / 445
页数：7
相关论文
共 50 条
  • [31] UV-curable hybrid coatings based on vinylfunctionlized siloxane oligorner and acrylated polyester
    He, Jianyun
    Zhou, Liang
    Soucek, Mark D.
    Wollyung, Kathleen M.
    Wesdekmiotis, Chrys
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 105 (04) : 2376 - 2386
  • [32] Bio-based organic-inorganic hybrid UV-curable hydrophobic coating prepared from epoxidized vegetable oils
    Liang, Bin
    Chen, Jieyi
    Guo, Xiulan
    Yang, Zhuohong
    Yuan, Teng
    INDUSTRIAL CROPS AND PRODUCTS, 2021, 163
  • [33] Synthesis of acrylated tannic acid as bio-based adhesion promoter in UV-curable coating with improved corrosion resistance
    Wang, Xiaoyu
    Zhang, Jiaqi
    Liu, Jingcheng
    Liu, Ren
    Luo, Jing
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2022, 644
  • [34] Synthesis of acrylated tannic acid as bio-based adhesion promoter in UV-curable coating with improved corrosion resistance
    Wang, Xiaoyu
    Zhang, Jiaqi
    Liu, Jingcheng
    Liu, Ren
    Luo, Jing
    Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 644
  • [35] UV-curable enzymatic antibacterial waterborne polyurethane coating
    Liu, Kai
    Su, Zhiguo
    Miao, Shida
    Ma, Guanghui
    Zhang, Songping
    BIOCHEMICAL ENGINEERING JOURNAL, 2016, 113 : 107 - 113
  • [36] UV-Curable Urethane Acrylate Resin from Palm Fatty Acid Distillate
    Teo, Kim Teck
    Hassan, Aziz
    Gan, Seng Neon
    POLYMERS, 2018, 10 (12):
  • [37] Polyimide–polyester hybrid UV-curable powder coating
    Hamideh M. Shokouhi Mehr
    Theodore J. Hammer
    Mark D. Soucek
    Journal of Coatings Technology and Research, 2021, 18 : 1445 - 1459
  • [38] Covalent Immobilization of α-Amylase onto UV-Curable Coating
    Yarar, Uemran
    Kahraman, Memet Vezir
    JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 114 (06) : 3716 - 3722
  • [39] UV-curable polyurethane dispersion for cationic electrodeposition coating
    Kim, YB
    Kim, HK
    Yoo, JK
    Hong, JW
    SURFACE & COATINGS TECHNOLOGY, 2002, 157 (01): : 40 - 46
  • [40] Development of a heat resistant UV-curable epoxy coating
    Bajpai, M
    Shukla, V
    Habib, F
    PROGRESS IN ORGANIC COATINGS, 2005, 53 (04) : 239 - 245
12345