Welding overlay analysis of dissimilar metal weld cracking of feedwater nozzle

被引：6

作者：

Tsai, Y. L. ^{[1
,2
]}

Wang, Li. H. ^{[2
]}

Fan, T. W. ^{[2
,3
]}

Ranganath, Sam ^{[2
]}

Wang, C. K. ^{[4
]}

Chou, C. P. ^{[1
]}

机构：

[1] Natl Chiao Tung Univ, Dept Mech Engn, Hsinchu 30010, Taiwan

[2] Ind Technol Res Inst, Hsinchu 310, Taiwan

[3] Chung Hua Univ, Dept Civil Engn & Engn Informat, Hsinchu 300, Taiwan

[4] Taiwan Power Co, Taipei 100, Taiwan

来源：

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2010年 / 87卷 / 01期

关键词：

Feedwater nozzle; Alloy; 182; Weld; ASME; FEM;

D O I：

10.1016/j.ijpvp.2009.11.008

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Inspection of the weld between the feedwater nozzle and the safe end at one Taiwan BWR showed axial indications in the Alloy 182 weld. The indication was sufficiently deep that continued operation could not be justified considering the crack growth for one cycle. A weld overlay was decided to implement for restoring the structural margin. This study reviews the cracking cases of feedwater nozzle welds in other nuclear plants, and reports the lesson learned in the engineering project of this weld overlay repair. The overlay design, the FCG calculation and the stress analysis by FEM are presented to confirm that the Code Case structural margins are met. The evaluations of the effect of weld shrinkage on the attached feedwater piping are also included. A number of challenges encountered in the engineering and analysis period are proposed for future study. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：26 / 32

页数：7

共 50 条

[21] INFLUENCE OF WELDING CONDITIONS ON RESISTANCE OF WELD METAL TO COLD CRACKING
MAKAROV, EL
YAKUSHINA, GM
WELDING PRODUCTION, 1974, 21 (10): : 55 - 59
[22] Weld overlay repair of nozzle and piping - Introduction
Yanagida, Nobuyoshi
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 1: CODES AND STANDARDS, 2007, 1 : 643 - 643
[23] METHODOLOGY FOR NUMERICAL WELDING SIMULATION VALIDATION: THE DISSIMILAR METAL WELD CASE
Gilles, Ph.
Courtin, S.
Vincent, R.
Yescas, M.
Gommez, F.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6B: MATERIALS AND FABRICATION, 2014,
[24] BRITTLE FRACTURE ANALYSIS OF A DISSIMILAR METAL WELD
Blouin, A.
Chapuliot, S.
Marie, S.
Bergheau, J. M.
Niclaeys, C.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 3: DESIGN AND ANALYSIS, 2014,
[25] Low heat input gas metal arc welding for dissimilar metal weld overlays part III: hydrogen-assisted cracking susceptibility
Frei, Julian
Alexandrov, Boian T.
Rethmeier, Michael
WELDING IN THE WORLD, 2019, 63 (03) : 591 - 598
[26] Low heat input gas metal arc welding for dissimilar metal weld overlays part III: hydrogen-assisted cracking susceptibility
Julian Frei
Boian T. Alexandrov
Michael Rethmeier
Welding in the World, 2019, 63 : 591 - 598
[27] AN EVALUATION OF AUSTENITIC FE-MN-NI WELD METAL FOR DISSIMILAR METAL WELDING
SELF, JA
MATLOCK, DK
OLSON, DL
WELDING JOURNAL, 1984, 63 (09) : S282 - S288
[28] Metallurgical evaluation of a feedwater nozzle to safe-end weld
Bowerman, BS
Czajkowski, CJ
Roberts, TC
Neal, C
MATERIALS CHARACTERIZATION, 1999, 43 (05) : 347 - 353
[29] POST WELD OVERLAY RESIDUAL STRESSES IN DISSIMILAR METAL WELDS CONSIDERING VARIOUS BUTT WELD AND WELD REPAIR FABRICATION SEQUENCES
Ku, Francis H.
Lohse, Christopher S.
Dijamco, David G.
Fourcade, Charles J.
Bax, Richard L.
Cofie, Nathaniel G.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 6, PTS A AND B, 2010, : 569 - 576
[30] Effect of Preemptive Weld Overlay on Residual Stress Mitigation for Dissimilar Metal Weld of Nuclear Power Plant Pressurizer
Song, Tae-Kwang
Bae, Hong-Yeol
Chun, Yun-Bae
Oh, Chang-Young
Kim, Yun-Jae
Lee, Kyoung-Soo
Park, Chi-Yong
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2008, 32 (10) : 873 - 881

← 1 2 3 4 5 →