Ultrahigh-Temperature Ceramic Based on ZrB2-SiC: Preparation and Main Properties

被引：6

作者：

Sokolov, P. S. ^{[1
]}

Arakcheev, A. V. ^{[1
]}

Mikhal'chik, I. L. ^{[1
]}

Plyasunkova, L. A. ^{[1
]}

Tkachev, A. V. ^{[1
]}

Anuchin, S. A. ^{[1
]}

Kordo, M. N. ^{[1
]}

Lanin, A. V. ^{[1
]}

Zabezhailov, A. O. ^{[1
]}

Kelina, I. Yu. ^{[1
]}

Rusin, M. Yu. ^{[1
]}

机构：

[1] AO ONPP AG Romashin Tekhnol, Obnisk, Kaluga Region, Russia

来源：

REFRACTORIES AND INDUSTRIAL CERAMICS | 2017年 / 58卷 / 01期

关键词：

ultra-high temperature ceramic materials (UHTCM); ceramic based on ZrB2-SiC; hot pressing (HP); zirconium diboride; silicon carbide; MECHANICAL-PROPERTIES; COMPOSITES;

D O I：

10.1007/s11148-017-0052-9

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Hot pressing of commercially available powders is used to prepare dense ceramic based on ZrB2 -SiC with different additives (Si3N4, TiSi2, ZrSi2, MoSi2). The main physicomechanical properties are measured in macro-specimens: ultimate strength in static three-point bending at room temperature 400 - 600 MPa, Vickers microhardness up to 15 GPa, and critical stress intensity factor up to 5.9 MPa center dot m(1/2). Average LTEC, thermal diffusivity, thermal conductivity, and oxidation resistance over a wide temperature range are determined. Altogether the ceramic properties obtained are at the level of published indices.

引用

页码：46 / 52

页数：7

共 50 条

[31] Densities and microstructure of ultrahigh temperature ceramics ZrB2-SiC prepared by explosive compaction
Wang, He-Ping
Liang, Yi-Ming
Liu, Shi-Qiang
Li, Jin-Ping
Zhou, Yu-Feng
Cailiao Kexue yu Gongyi/Material Science and Technology, 2011, 19 (05): : 50 - 53
[32] Behavior of Ultrahigh-Temperature ZrB2-Based Ceramics in Oxidation
O. N. Grigoriev
I. P. Neshpor
T. V. Mosina
V. B. Vinokurov
A. V. Koroteev
O. V. Buriachek
D. V. Vedel
A. N. Stepanchuk
L. Silvestroni
Powder Metallurgy and Metal Ceramics, 2018, 56 : 573 - 580
[33] The ZrB2-SiC, ultrahigh temperature ceramics prepared by explosive compaction of hybrid explosive
Li Jinping
Meng Songhe
Han Jiecai
Zhang Xinghong
Liang Jun
RARE METAL MATERIALS AND ENGINEERING, 2007, 36 : 8 - 11
[34] Time Dependent Mechanical Properties of ZrB2-SIC Ceramic Composites: Room Temperature Fatigue Parameters
Lugovy, M.
Orlovskaya, N.
Neubert, M.
Aneziris, C. G.
Graule, T.
Kuebler, J.
SCIENCE OF ADVANCED MATERIALS, 2014, 6 (04) : 844 - 852
[35] Microstructure and mechanical properties of ZrB2-SiC ceramic composite brazed joint
Xu, Xiaolong
Li, Zhuoran
Liu, Ruihua
Wang, Zhengzheng
Hanjie Xuebao/Transactions of the China Welding Institution, 2014, 35 (01): : 59 - 62
[36] Ablative properties of laminated ZrB2-SiC ceramic modified by SiC whisker in oxyacetylene environment
Ma, Xuefei
Wei, Chuncheng
Liu, Ruixiang
Li, Shuang
Zhang, Zhongya
Liu, Lanyong
Wang, Peng
Wang, Yishan
CORROSION SCIENCE, 2021, 182
[37] Effect of sintering temperature on densification of ultra-high temperature ceramic ZrB2-SiC
Cao, Jianling
Xu, Qiang
Zhu, Shizhen
Wang, Fuchi
Zhao, Junfeng
Ni, Chuanhao
Feng, Chao
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2007, 36 (SUPPL. 2): : 171 - 173
[38] Preparation of ZrB2-SiC ceramic composites and testing of its resistance to thermal shock
Laboratory of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, China
Fenmo Yejin Jishu, 2008, 4 (260-264):
[39] Effect of sintering temperature on densification of ultra-high temperature ceramic ZrB2-SiC
Cao Jianling
Xu Qiang
Zhu Shizhen
Wang Fuchi
Zhao Junfeng
Ni Chuanhao
Feng Chao
RARE METAL MATERIALS AND ENGINEERING, 2007, 36 : 171 - 173
[40] Gas tungsten arc welding of ZrB2-SiC based ultra high temperature ceramic composites
Krishnarao, R. V.
Reddy, G. Madhusudhan
DEFENCE TECHNOLOGY, 2015, 11 (03): : 188 - 196

← 1 2 3 4 5 →