Microstructure stability and mechanical properties of ultrafine grained 5052 Al alloy fabricated by differential speed rolling

被引：16

作者：

Ko, Young Gun ^{[1
]}

Hamad, Kotiba ^{[2
]}

机构：

[1] Yeungnam Univ, Sch Mat Sci & Engn, Plast Control & Mech Modelling Lab, Gyongsan 38541, South Korea

[2] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, Suwon 16419, South Korea

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2018年 / 733卷

基金：

新加坡国家研究基金会;

关键词：

Al alloy; Differential speed rolling; Annealing; Mechanical properties; STRAIN; DEFORMATION; STEEL;

D O I：

10.1016/j.msea.2018.07.033

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In the present work, we investigated the effect of annealing on microstructural evolution and associated mechanical properties of 5052 Al alloy samples subjected to a severe plastic deformation by differential speed rolling (DSR) process. To achieve that, the DSR-deformed samples were isochronally annealed for 1 h at temperatures from 423 K to 523 K with intervals of 25 K. The results clearly indicated that the severe plastic deformation by the DSR followed by the annealing can significantly change the structure, and thus, enhance the related performance of the 5052 Al alloy.

引用

页码：24 / 27

页数：4

共 50 条

[31] Effect of differential speed rolling on microstructure and mechanical properties of an AZ91 magnesium alloy
Kim, W.J.
Park, J.D.
Kim, W.Y.
Journal of Alloys and Compounds, 2008, 460 (1-2): : 289 - 293
[32] Effect of differential speed rolling on microstructure and mechanical properties of an AZ91 magnesium alloy
Kim, W. J.
Park, J. D.
Kim, W. Y.
JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 460 (1-2) : 289 - 293
[33] Microstructure and Mechanical Properties of Cu-Ni-Si Alloy Deformed by Differential Speed Rolling
Lee, Seong-Hee
Han, Seung Zeon
KOREAN JOURNAL OF MATERIALS RESEARCH, 2016, 26 (01): : 8 - 12
[34] Effect of annealing and additional deformation on the microstructure and mechanical properties of ultrafine-grained Al5083 alloy
Evstifeev, A. D.
Smirnov, I. V.
MATERIALS PHYSICS AND MECHANICS, 2023, 51 (03): : 20 - 28
[35] Effect of cryo groove rolling followed by warm rolling (CGW) on the mechanical properties of 5052 Al alloy
Yogesha, K. K.
Joshi, Amit
Kumar, Nikhil
Jayaganthan, R.
MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (12) : 1336 - 1344
[36] Mechanical properties and aging behavior of ultrafine grained Al-Ag alloy fabricated by accumulative roll-bonding
Nagae, Tadashige
Tsuji, Nobuhiro
Terada, Daisuke
ALUMINIUM ALLOYS 2014 - ICAA14, 2014, 794-796 : 851 - 856
[37] Effect of Microstructural Change on Mechanical Properties of CNT/Al Composites Fabricated with Differential Speed Rolling Process
Lee, Jongbeom
Jeong, Haguk
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2016, 16 (11) : 11298 - 11302
[38] Enhanced Thermal Stability And Mechanical Properties of Ultrafine-Grained Aluminum Alloy
Islamgaliev, Rinat K.
Nikitina, Marina A.
Kamalov, Aidar F.
NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2, 2011, 667-669 : 331 - 336
[39] Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling
Kim, W. J.
Lee, K. E.
Choi, S. -H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 506 (1-2): : 71 - 79
[40] Microstructure and mechanical properties of ultrafine grained low carbon steel fabricated by conventional cold-rolling and annealing of martensite (martensite process)
Ueji, R
Tsuji, N
Minamino, Y
Koizumi, Y
ULTRAFINE GRAINED MATERIALS III, 2004, : 143 - 148

← 1 2 3 4 5 →