The effect of ion implantation on the wear of Co-Cr-Mo alloy

被引：11
|
作者：
Werner, Z. [1 ]
Barlak, M.
Gradzka-Dahlke, M.
Diduszko, R.
Szymczyk, W.
Dabrowski, J.
Piekoszewski, J.
Borkowska, K.
机构：
[1] Andrzej Soltan Inst Nucl Studies, PL-05400 Otwock, Poland
[2] Bialystok Tech Univ, PL-15351 Bialystok, Poland
[3] Inst Chem Phys, PAS, PL-01224 Warsaw, Poland
[4] Ind Inst Elect, PL-01241 Warsaw, Poland
[5] Inst Elect Mat Technol, PL-01919 Warsaw, Poland
[6] Inst Nucl Chem & Technol, PL-03145 Warsaw, Poland
来源：
VACUUM | 2007年 / 81卷 / 10期
关键词：
Co-Cr-Mo alloys; ion implantation; wear;
D O I：
10.1016/j.vacuum.2007.01.014
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of C+N and O ion implantation upon tribological properties of Co-Cr-Mo alloy was studied for fluence range 3-7 x 10(17)cm(-2) and implantation temperature range 200-400 degrees C. Phase structure changes and implanted ion distributions were determined. A marked improvement of the wear rate was noticed. Higher implantation temperatures reduce the improvement. No traces of nitride or carbide phases have been found but chromium oxide phase has been detected after O implantation. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1191 / 1194
页数：4
相关论文
共 50 条
  • [1] Effect of silicon ion implantation on the properties of a cast Co-Cr-Mo alloy
    Kaminski, M
    Baszkiewicz, J
    Kozubowski, J
    Bednarska, A
    Barcz, A
    Gawlik, G
    Jagielski, J
    JOURNAL OF MATERIALS SCIENCE, 1997, 32 (14) : 3727 - 3732
  • [2] Wear behavior of carbide coated Co-Cr-Mo implant alloy
    Vandamme, NS
    Wayman, BH
    Topoleski, LDT
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2003, 14 (01) : 47 - 53
  • [3] Effect of heat treatment on hardness and wear behavior of weld deposited Co-Cr-Mo alloy
    Mallik, Mantrala Kedar
    Rao, Chalamalasetty Srinivasa
    Rao, Vaddi Venkata Sundara Kesava
    MATERIA-RIO DE JANEIRO, 2015, 20 (02): : 544 - 549
  • [4] THE INFLUENCE OF MICROSTRUCTURE ON THE ADHESIVE WEAR-RESISTANCE OF A CO-CR-MO ALLOY
    CLEMOW, AJT
    DANIELL, BL
    WEAR, 1980, 61 (02) : 219 - 231
  • [5] Effect of the Remelting on Transformations in Co-Cr-Mo Prosthetics Alloy
    Kacprzyk, B.
    Szymczak, T.
    Gumienny, G.
    Klimek, L.
    ARCHIVES OF FOUNDRY ENGINEERING, 2013, 13 (03) : 47 - 50
  • [6] NUCLEATION OF RECRYSTALLIZATION IN A CO-CR-MO ALLOY
    RAJAN, K
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1984, 15 (07): : 1335 - 1338
  • [7] Nitriding of Co-Cr-Mo alloy in nitrogen
    Tang, Ning
    Li, Yunping
    Koizumi, Yuichiro
    Chiba, Akihiko
    MATERIALS CHEMISTRY AND PHYSICS, 2014, 145 (03) : 350 - 356
  • [8] Effect of silicon ion implantation on the properties of a cast Co–Cr–Mo alloy
    M Kaminski
    J Baszkiewicz
    J Kozubowski
    A Bednarska
    A Barcz
    G Gawlik
    J Jagielski
    Journal of Materials Science, 1997, 32 : 3727 - 3732
  • [9] Effect of ion beam etching on the tribological performance of laser textured Co-Cr-Mo alloy
    Zhang, Kedong
    Li, Haishan
    Zhang, Chuang
    Han, Yujie
    Guo, Xuhong
    Liu, Tongshun
    OPTICS AND LASER TECHNOLOGY, 2023, 160
  • [10] Effect of nitrogen on the microstructure and mechanical properties of a Co-Cr-Mo alloy
    Escobedo, Jose
    Mendez, Juan
    Cortes, Dora
    Gomez, Juan
    Mendez, Manuel
    Mancha, Hector
    Materials & Design, 17 (02): : 79 - 83
12345