Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method

被引：18
|
作者：
Raweni, Abuajila [1 ]
Majstorovic, Vidosav [1 ]
Sedmak, Aleksandar [1 ]
Tadic, Srdjan [2 ]
Kirin, Snezana [2 ]
机构：
[1] Univ Belgrade, Fac Mech Engn, Kraljice Marije 16, Belgrade 11020 35, Serbia
[2] Fac Mech Engn, Innovat Ctr, Kraljice Marije 16, Belgrade 11020, Serbia
来源：
TEHNICKI VJESNIK-TECHNICAL GAZETTE | 2018年 / 25卷 / 03期
关键词：
ANOVA analysis; crack initiation energy; crack propagation energy; friction stir welding; Taguchi method;
D O I：
10.17559/TV-20180123115758
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, Taguchi design was applied to find out the optimized set of friction steel welding parameters in terms of total crack energy, crack initiation energy, and crack propagation energy in weldments. Taguchi approach was used to design a set of welding experiments concerning rotational welding speed, traversing speed, and tool tilt angle. Welding variables were analyzed by means of Taguchi orthogonal arrays and signal-to-noise ratio analysis to find the optimum welding parameters. ANOVA analysis was used to determine the influence between each of these parameters.
引用
收藏
页码：861 / 866
页数：6
相关论文
共 50 条
  • [1] Optimization of parameters for Friction stir Batt-Lap welding of AA5083 alloy
    Trukhanov, K.
    Zybin, I
    Bilenko, A.
    Tsarkov, A.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 1644 - 1647
  • [2] Friction stir welding parameters optimization of naval grade AA5083 alloy: RSM
    Reddy, Maram Sreenivasulu
    Kumar, M. Vinoth
    [J]. INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2023,
  • [3] Friction stir welding of AA5083 aluminum alloy
    Liu, HJ
    Fujii, H
    Maeda, M
    Nogi, K
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 : 14 - 17
  • [4] Prediction of Optimum Welding parameters for Friction stir welding of Aluminium Alloy AA5083 Using Response Surface Method
    Kumar, R. Saravana
    Rajasekaran, T.
    Prasad, Varun G.
    [J]. 3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
  • [5] An Analysis Comparing the Taguchi Method for Optimizing the Process Parameters of AA5083/Silicon Carbide and AA5083/Coal Composites That Are Fabricated via Friction Stir Processing
    Muribwathoho, Oritonda
    Msomi, Velaphi
    Mabuwa, Sipokazi
    [J]. Applied Sciences (Switzerland), 2024, 14 (20):
  • [6] Optimisation of underwater friction stir welding parameters of aluminum alloy AA5083 using RSM and GRA
    Saravanakumar, R.
    Rajasekaran, T.
    Pandey, C.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023, 237 (06) : 2334 - 2348
  • [7] Friction stir welding of similar and dissimilar AA7075 and AA5083
    Ahmed, M. M. Z.
    Ataya, Sabbah
    Selema, M. M. El-Sayed
    Ammar, H. R.
    Ahmed, Essam
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 242 : 77 - 91
  • [8] Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints
    Saeidi, M.
    Manafi, B.
    Givi, M. K. Besharati
    Faraji, G.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016, 230 (07) : 1284 - 1294
  • [9] Fabrication of SiCp/AA5083 composite via friction stir welding
    Byung-Wook AHN
    Don-Hyun CHOI
    Yong-Hwan KIM
    Seung-Boo JUNG
    [J]. Transactions of Nonferrous Metals Society of China, 2012, 22 (S3) : 634 - 638
  • [10] Fabrication of SiCp/AA5083 composite via friction stir welding
    Ahn, Byung-Wook
    Choi, Don-Hyun
    Kim, Yong-Hwan
    Jung, Seung-Boo
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 : S634 - S638
12345