Diffusivities of an Al-Fe-Ni melt and their effects on the microstructure during solidification

被引:83
|
作者
Zhang, Lijun [1 ,2 ]
Du, Yong [1 ]
Steinbach, Ingo [2 ]
Chen, Qing [3 ]
Huang, Baiyun [1 ]
机构
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
[2] Ruhr Univ Bochum, Interdisciplinary Ctr Adv Mat Simulat, D-44801 Bochum, Germany
[3] Thermocalc Software AB, S-11347 Stockholm, Sweden
基金
中国国家自然科学基金;
关键词
Al-Fe-Ni melt; Diffusion; Atomic mobility; Microstructure; Solidification; SELF-DIFFUSION COEFFICIENT; LIQUID-METALS; TRANSPORT-PROPERTIES; ATOMIC DIFFUSION; SIMULATION; ALUMINUM; SYSTEM; PHASE; CR; EQUILIBRIUM;
D O I
10.1016/j.actamat.2010.03.002
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A systematical investigation of the diffusivities in an Al-Fe-Ni melt was presented. Based on the experimental and theoretical data about diffusivities, the temperature- and composition-dependent atomic mobilities were evaluated for the elements in Al-Ni, Al-Fe, Fe-Ni and Al-Fe-Ni melts via an effective approach. Most of the reported diffusivities can be reproduced well by the obtained atomic mobilities. In particular, for the first time the ternary diffusivity of the liquid in a ternary system is described in conjunction with the established atomic mobilities. The effect of the atomic mobilities in a liquid on microstructure and microsegregation during solidification was demonstrated with one Al-Ni binary alloy. The simulation results indicate that accurate databases of mobilities in the liquid phase are much needed for the quantitative simulation of microstructural evolution during solidification by using various approaches, including DIC-TRA and the phase-field method. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:3664 / 3675
页数:12
相关论文
共 50 条
  • [31] THE EFFECTS OF THERMOMECHANICAL PROCESSING ON THE TENSILE PROPERTIES OF AN AL-FE-NI P-M ALLOY
    KIM, YW
    BIDWELL, LR
    JOURNAL OF METALS, 1980, 32 (12): : 91 - 91
  • [32] Evaluation of Microstructure and Hardness of Novel Al-Fe-Ni Alloys with High Thermal Stability for Laser Additive Manufacturing
    Loginova, I. S.
    Sazerat, M., V
    Loginov, P. A.
    Pozdniakov, A., V
    Popov, N. A.
    Solonin, A. N.
    JOM, 2020, 72 (11) : 3744 - 3752
  • [33] Effect of Fe and Al on phosphorus distribution characteristics during solidification of Si-Fe-Al alloy melt
    Deng, Xiaocong
    Zhou, Lei
    Wei, Kuixian
    Ma, Wenhui
    Zhang, Hui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 934
  • [34] Reinforcement of Al-Fe-Ni alloys with the in situ formation of composite materials
    Vourlias, G.
    Pistofidis, N.
    Pavlidou, E.
    Stergioudis, G.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 483 (1-2) : 178 - 181
  • [35] Development of a New Al-Fe-Ni Alloy for Electric Vehicle Applications
    Pan, Lei
    Breton, Francis
    Fourmann, Jerome
    INTERNATIONAL JOURNAL OF METALCASTING, 2024, 18 (04) : 2841 - 2845
  • [36] Reinforcement of Al-Fe-Ni alloys with the in situ formation of composite materials
    Vourlias, G.
    Pistofidis, N.
    Pavlidou, E.
    Stergioudis, G.
    Journal of Alloys and Compounds, 2009, 483 (1-2): : 178 - 181
  • [37] Evaluation of Microstructure and Hardness of Novel Al-Fe-Ni Alloys with High Thermal Stability for Laser Additive Manufacturing
    I. S. Loginova
    M. V. Sazerat
    P. A. Loginov
    A. V. Pozdniakov
    N. A. Popov
    A. N. Solonin
    JOM, 2020, 72 : 3744 - 3752
  • [38] Effect of Rapid Solidification on Magnetostriction and Microstructure in Melt-Spun Fe-Al Ribbons
    Turtelli, R. Sato
    Vlasak, G.
    Kubel, F.
    Mehmood, N.
    Kriegisch, M.
    Groessinger, R.
    Sassik, H.
    IEEE TRANSACTIONS ON MAGNETICS, 2010, 46 (02) : 483 - 486
  • [39] SOLIDIFICATION AND MICROSTRUCTURE ANALYSIS OF RAPIDLY SOLIDIFIED MELT-SPUN AL-FE ALLOYS
    CHU, MG
    GRANGER, DA
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (01): : 205 - 212
  • [40] Mossbauer study of precipitates in rapidly solidified Al-Fe-Ni alloys
    Zhao, ZT
    Luo, YY
    Zhai, QH
    Lu, ZX
    Ma, RZ
    ZEITSCHRIFT FUR METALLKUNDE, 1996, 87 (01): : 40 - 44