Thermal Analysis and Kinetic Study of Indian Almond Leaf by Model-Free Methods

被引:17
|
作者
Joseph, David [1 ]
Jesuretnam, Bensam Raj [2 ]
Ramar, Karuppasamy [3 ]
机构
[1] Rajas Engn Coll, Dept Mech Engn, Alaganeri, Tamil Nadu, India
[2] Muthayammal Engn Coll, Dept Mech Engn, Rasipuram, India
[3] Sethu Inst Technol, Dept Mech Engn, Kariapatti, India
关键词
Thermal analysis; kinetic study; Indian almond leaf; model-free methods; thermogravimetric study; pyrolysis;
D O I
10.1080/15440478.2021.1889442
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
Thermogravimetric analysis of Indian almond leaf was carried out at four different heating rates such as 5 degrees C/min, 10 degrees C/min, 15 degrees C/min and 20 degrees C/min. The kinetic study was performed using model free methods and the kinetic parameters were calculated by Kissinger, Friedman, KAS and FWO models. Thermogravimetric analysis resulted that the Indian almond leaf showed four stages of decomposition. Most of the mass loss occurred at stage II (188-460 degrees C) owing to the simultaneous decomposition of cellulose, hemicellulose, and lignin. The shifting of pyrolysis curve occurred with increase of heating rate due to the limitation of heat transfer. The rate of mass loss decreased while increasing the heating rate due to the presence of more inert content i.e. ash and less volatile matters. The mean activation energy calculated by Kissinger, Friedman, KAS, and FWO showed as 52.67, 45.53, 73.73, and 72.28 kJ/mole. The mean activation energy of different leaves reported by earlier researcher was compared with the activation energy of Indian almond leaf and concluded that it stick to the range of activation energy of reported leaves.
引用
收藏
页码:5793 / 5803
页数:11
相关论文
共 50 条
  • [31] Thermal degradation of bituminous coal with both model-free and model fitting methods
    Du, Wenzhou
    Wang, Gang
    Wang, Yue
    Liu, Xuelin
    APPLIED THERMAL ENGINEERING, 2019, 152 : 169 - 174
  • [32] Application of model-free and multivariate nonlinear regression methods for evaluation of the kinetic scheme and kinetic parameters of thermal decomposition of low density polyethylene
    Budrugeac, P.
    Cucos, A.
    Dascalu, R.
    Atkinson, I
    Osiceanu, P.
    THERMOCHIMICA ACTA, 2022, 708
  • [33] Kinetic Prediction of Fast Curing Polyurethane Resins by Model-Free Isoconversional Methods
    Stanko, Michael
    Stommel, Markus
    POLYMERS, 2018, 10 (07)
  • [34] Investigation of kinetic and thermodynamic parameters of coal pyrolysis with model-free fitting methods
    Yan, Jingchong
    Yang, Qitong
    Zhang, Li
    Lei, Zhiping
    Li, Zhanku
    Wang, Zhicai
    Ren, Shibiao
    Kang, Shigang
    Shui, Hengfu
    CARBON RESOURCES CONVERSION, 2020, 3 : 173 - 181
  • [35] Evaluation of the Validity of Model-Fitting and Model-Free Methods for Kinetic Analysis of Nonisothermal Pyrolysis of Siberian Fir Bark
    Fetisova, O. Yu
    Mikova, N. M.
    Taran, O. P.
    KINETICS AND CATALYSIS, 2020, 61 (06) : 846 - 853
  • [36] Evaluation of the Validity of Model-Fitting and Model-Free Methods for Kinetic Analysis of Nonisothermal Pyrolysis of Siberian Fir Bark
    O. Yu. Fetisova
    N. M. Mikova
    O. P. Taran
    Kinetics and Catalysis, 2020, 61 : 846 - 853
  • [37] Kinetic study of forest fuels by TGA: Model-free kinetic approach for the prediction of phenomena
    Leroy, Valerie
    Cancellieri, Dominique
    Leoni, Eric
    Rossi, Jean-Louis
    THERMOCHIMICA ACTA, 2010, 497 (1-2) : 1 - 6
  • [38] Thermal and Kinetic Studies on Biomass Degradation via Thermogravimetric Analysis: A Combination of Model-Fitting and Model-Free Approach
    Emiola-Sadiq, Tolu
    Zhang, Lifeng
    Dalai, Ajay K.
    ACS OMEGA, 2021, 6 (34): : 22233 - 22247
  • [39] Kinetic Analysis of Durian Rind Pyrolysis Using Model-Free Method
    Bampenrat, A.
    Boonkitkoson, A.
    Seangwattana, T.
    Suttiarporn, P.
    Sukkathanyawat, H.
    2020 2ND INTERNATIONAL CONFERENCE ON ENVIRONMENT SCIENCES AND RENEWABLE ENERGY, 2020, 586
  • [40] Model-free kinetic analysis of melamine-formaldehyde resin cure
    Kandelbauer, A.
    Wuzella, G.
    Mahendran, A.
    Taudes, I.
    Widsten, P.
    CHEMICAL ENGINEERING JOURNAL, 2009, 152 (2-3) : 556 - 565