Study of the effect of friction stir processing of the sliding wear behavior of cast NiAl bronze: A statistical analysis

被引：42

作者：

Thapliyal, Shivraman ^{[1
]}

Dwivedi, Dheerendra Kumar ^{[1
]}

机构：

[1] IIT, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

来源：

TRIBOLOGY INTERNATIONAL | 2016年 / 97卷

关键词：

Friction stir processing; Nickel aluminum bronze; Wear; Friction; ALUMINUM BRONZE; MICROSTRUCTURAL MODIFICATION; COPPER; ALLOY; BEARING; FE;

D O I：

10.1016/j.triboint.2016.01.008

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper embodies the findings of a study on the effect of normal load, sliding velocity, and surface temperature on the dry sliding wear behavior of friction stir processed C95500 nickel aluminum bronze (NAB) alloy. Adhesive wear behavior was studied using the pin on disk tribometer as per ASTM G99-04 standard, using two level full factorial approachs. The friction processed (FSPed) surface under study showed lower wear rate than as-cast alloy. The wear rate in both conditions, as-cast as well as FSPed, at high temperature was found lower than the one during ambient temperature condition. The wear mode and operating wear mechanism were assessed through SEM study of the worn surface and wear debris. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：124 / 135

页数：12

共 50 条

[41] Microstructure and wear behavior of friction stir processed cast hypereutectic aluminum silicon
Ahmad, Rosli
Abdulmalik, Samir Sani
Usman, Ojonimi Yusuf
Danjuma, Sufyanu Bashir
8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2017 (ICME'17), 2017, 135
[42] Improvement the wear behavior of low carbon steels by friction stir processing
Sekban, D. M.
Aktarer, S. M.
Yanar, H.
Alsaran, A.
Purcek, G.
13TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (ROTRIB'16), 2017, 174
[43] Effect of friction stir processing on the wear rate of as-cast AZ91D Magnesium alloy
Kumar, Ashwani
Singh, Balwinder
Kumar, Pardeep
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 10384 - 10388
[44] Effect of Processing Parameters and Temperature on Sliding Wear of H62 Copper Alloy Modified by Friction Stir Surface Processing
Song, Weiwei
Xu, Xiaojing
Zuo, Dunwen
Wang, Jianli
Wang, Gang
MATERIALS SCIENCE-MEDZIAGOTYRA, 2017, 23 (03): : 222 - 226
[45] Microstructural Characterization and Sliding Wear Behavior of Cu/TiC Copper Matrix Composites Developed Using Friction Stir Processing
Dinaharan I.
Akinlabi E.T.
Hattingh D.G.
Metallography, Microstructure, and Analysis, 2018, 7 (4) : 464 - 475
[46] Effect of friction stir processing on the microstructure of cast A356 aluminum
Ma, Z. Y.
Sharma, S. R.
Mishra, R. S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 433 (1-2): : 269 - 278
[47] Effect of friction stir processing on the fatigue behaviour of cast aluminium alloy
Uematsu, Yoshihiko
Tokaji, Keiro
Tozaki, Yasunari
Shibata, Hideaki
Fujiwara, Kazuma
Murayama, Tomiyuki
Zairyo/Journal of the Society of Materials Science, Japan, 2009, 58 (01) : 69 - 75
[48] EFFECT OF FRICTION STIR PROCESSING ON CORROSION BEHAVIOR OF CAST AZ91C MAGNESIUM ALLOY
Hassani, Behzad
Vallant, Rudolf
Karimzadeh, Fathallah
Enayati, Mohammad Hossein
Sabooni, Soheil
Pradeep, Kasyap
SURFACE REVIEW AND LETTERS, 2019, 26 (06)
[49] Synergistic Effect Between Cavitation Erosion and Corrosion for Friction Stir Processed NiAl Bronze in Artificial Seawater
Yang Li
Ying Lian
Yanjun Sun
Metals and Materials International, 2021, 27 : 5082 - 5094
[50] Effect of Post Heat Treatment on the Microstructure and Microhardness of Friction Stir Processed NiAl Bronze (NAB) Alloy
Lv, Yuting
Wang, Liqiang
Xu, Xiaoyan
Lu, Weijie
METALS, 2015, 5 (03): : 1695 - 1703

← 1 2 3 4 5 →