Laser-induced discharge in a rod-plane electrode in the presence of a negative dc electric field

Discharge induction experiments were performed between a plate and a rod on a plate electrode configuration with a gay length of 1 m using a high-power CO2 laser and a dc voltage generator. The electrodes are parallel planes. Each plate electrode consists of a central flat part having a diameter of 3 m with a circular edge on a cross section. The length of the rod is 10 cm. A chain of plasma beads of length 10 cm was created on the tip of the rod by the CO2 laser and used for artificial triggering of negative high-voltage spark-over. The behavior of streamer, leader, and return stroke was observed by an image converter camera. It was found that a positive upward traveling leader can be triggered from the tip of the rod on the lower plane to the upper plane by the chain of plasma beads created by the CO2 laser. This apparatus is useful for study for realization of laser-induced lightning. (C) 2000 Scripta Technica.