Joining of stainless steel 304L with Zircaloy-4 by diffusion bonding technique using Ni and Ti interlayers

被引：40
|
作者：
Srikanth, V. [1 ]
Laik, A. [1 ,2 ]
Dey, G. K. [1 ,2 ]
机构：
[1] Bhabha Atom Res Ctr, Mat Sci Div, Bombay 400085, Maharashtra, India
[2] Homi Bhabha Natl Inst, Bombay 400094, Maharashtra, India
来源：
MATERIALS & DESIGN | 2017年 / 126卷
关键词：
Diffusion; Intermetallic compounds; Diffusion zone; Shear strength; MECHANICAL-PROPERTIES; TRANSITION JOINTS; TITANIUM; NICKEL; MICROSTRUCTURE; ALLOY;
D O I：
10.1016/j.matdes.2017.04.037
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A methodology, based on diffusion bonding has been developed, for joining stainless steel (SS) type 304L and Zircaloy-4 using Ni and Ti interlayers. Diffusion bonding was performed in the range of 800 degrees C-900 degrees C under vacuum for different time intervals varying between 30 and 90 min. The bonding parameters were optimized at bonding temperature of 850 degrees C for 60 min duration, when the maximum shear strength of 209 MPa was obtained. The SS 304L/Zircaloy-4 joint interfaces showed the formation of different intermetallics like NiZr2, NiZr, Ni3Ti, NiTi and NiTiZr in layered morphology. The interface of the joint bonded at 900 degrees C showed the formation of Ni-Zr type intermetallics, while those of the joints bonded at 800 degrees C and 850 degrees C showed the presence of Ni-Ti type intermetallics. The phases present on the both SS and Zircaloy fracture surfaces were identified as NiTiZr and NiZr2 for bonding conditions 850 degrees C-60 min and 900 degrees C-30 min, respectively.
引用
收藏
页码：141 / 154
页数：14
相关论文
共 50 条
  • [41] Microstructural evolution in the partial transient liquid phase diffusion bonding of Zircaloy-4 to stainless steel 321 using active titanium filler metal
    Atabaki, M. Mazar
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2010, 406 (03) : 330 - 344
  • [42] HYDRIDING BEHAVIOR OF ZIRCALOY-4-STAINLESS STEEL TYPE 304 DIFFUSION COUPLES
    HAMMAD, FH
    SHAABAN, HI
    BARON, JL
    [J]. JOURNAL OF THE LESS-COMMON METALS, 1979, 64 (01): : 77 - 86
  • [43] Vacuum brazing of Zircaloy-4 and stainless steel using Ag-Cu-Ti brazing filler metal
    Qi Kai
    Li Ruifeng
    [J]. PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 2069 - 2073
  • [44] Characterization of Interfacial Microstructure and Mechanical Properties of the Diffusion Bonded CP-Ti to AISI 304L Stainless Steel
    D. Sunilkumar
    Harish Chandra Dey
    Shaju K. Albert
    Hasan Shaikh
    M. Arvinth Davinci
    S. Murugesan
    [J]. Transactions of the Indian Institute of Metals, 2021, 74 : 9 - 20
  • [45] Diffusion bonding of aluminium oxide to stainless steel using stress relief interlayers
    Travessa, D
    Ferrante, M
    den Ouden, G
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 337 (1-2): : 287 - 296
  • [46] Characterization of Interfacial Microstructure and Mechanical Properties of the Diffusion Bonded CP-Ti to AISI 304L Stainless Steel
    Sunilkumar, D.
    Dey, Harish Chandra
    Albert, Shaju K.
    Shaikh, Hasan
    Arvinth Davinci, M.
    Murugesan, S.
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (01) : 9 - 20
  • [47] Nitrogen interstitial diffusion induced decomposition in AISI 304L austenitic stainless steel
    Martinavicius, A.
    Abrasonis, G.
    Scheinost, A. C.
    Danoix, R.
    Danoix, F.
    Stinville, J. C.
    Talut, G.
    Templier, C.
    Liedke, O.
    Gemming, S.
    Moeller, W.
    [J]. ACTA MATERIALIA, 2012, 60 (10) : 4065 - 4076
  • [48] DIFFUSION AND TRAPPING OF TRITIUM IN GRAIN-BOUNDARIES OF 304L STAINLESS-STEEL
    ABRAHAM, PM
    ELLEMAN, TS
    VERGHESE, K
    [J]. JOURNAL OF NUCLEAR MATERIALS, 1978, 73 (01) : 77 - 88
  • [49] High Temperature Oxidation of 304L Stainless Steel and Its Effects on Glass-to-Metal Joining
    Susan, D. F.
    Van Den Avyle, J. A.
    Monroe, S. L.
    Sorensen, N. R.
    McKenzie, B. B.
    Michael, J. R.
    Christensen, J. E.
    Walker, C. A.
    [J]. BRAZING AND SOLDERING, PROCEEDINGS, 2006, : 104 - 110
  • [50] Rapid Joining of Commercial-Purity Ti to 304 Stainless Steel Using Joule Heating Diffusion Bonding: Interfacial Microstructure and Strength of the Dissimilar Joint
    Suzuki, K. T.
    Sato, Y. S.
    Tokita, S.
    [J]. METALS, 2020, 10 (12) : 1 - 11
12345