Characterization of as grown and nitrogen incorporated tetrahedral amorphous carbon films deposited by pulsed unfiltered cathodic vacuum arc process

被引:27
|
作者
Panwar, OS
Deb, B
Satyanarayana, BS
Khan, MA
Bhattacharyya, R
Pal, AK
机构
[1] Natl Phys Lab, Plasma Processed Mat Grp, New Delhi 110012, India
[2] Indian Assoc Cultivat Sci, Dept Mat Sci, Kolkata 700032, W Bengal, India
[3] Rodel Nitta Co, Yamato Koriyama 6391032, Japan
关键词
Raman; PL; FTIR; ta-C; unfiltered cathodic vacuum arc; deposition process;
D O I
10.1016/j.tsf.2004.06.164
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Reported is a study of the as grown and nitrogen incorporated tetrahedral amorphous carbon (ta-C) films deposited by a pulsed unfiltered cathodic vacuum arc process using Raman scattering, photoluminescence (PL) and Fourier transform infrared (FTIR) spectroscopy. The influence of the substrate bias in as grown ta-C films and the effect of the nitrogen content in nitrogen incorporated ta-C films under a fixed bias condition were studied. The Raman spectroscopic study showed that, in the present study, the as grown ta-C films deposited at 40 V substrate bias possibly have the highest sp(3) bonded carbon concentration, as observed by the large shift in the G peak to similar to1596 cm(-1). In the case of the nitrogen incorporated ta-C films, the G peak exhibited a shift towards lower wave number with increasing nitrogen content, suggesting an increase in disorder. The PL spectra indicated a strong peak similar to2.21 eV arising due to extended defects like dislocations followed by a small one similar to1.92 eV which could be identified as a zero phonon line (ZPL) doublet. Another peak at similar to2.63 eV could be attributed to TR12 center. PL peak at similar to2.21 eV showed an inflexion in ta-C films deposited at 40 V substrate bias. An increase in intensity of the PL peak at similar to2.17 eV and its full width at half maximum (FVHM) value was also observed due to the increase in nitrogen content in the films. The FTIR spectra showed the characteristic peaks at 2958, 2366, 2350, 1610, 1512, 1047 and 710 cm-1 in as grown and nitrogen incorporated ta-C films. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码:180 / 188
页数:9
相关论文
共 50 条
  • [31] Effect of hydrogen and nitrogen incorporation on the properties of tetrahedral amorphous carbon films grown using S bend filtered cathodic vacuum are process
    Panwar, O. S.
    Khan, Mohd Alim
    Bhagavanarayana, G.
    Dixit, P. N.
    Kumar, Sushil
    Rauthan, C. M. S.
    INDIAN JOURNAL OF PURE & APPLIED PHYSICS, 2008, 46 (11) : 797 - 805
  • [32] Mo-containing tetrahedral amorphous carbon deposited by dual filtered cathodic vacuum arc with selective pulsed bias voltage
    Pasaja, Nitisak
    Sansongsiri, Sakon
    Intarasiri, Saweat
    Vilaithong, Thiraphat
    Anders, Andre
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2007, 259 (02): : 867 - 870
  • [33] Structure and properties of Si incorporated tetrahedral amorphous carbon films prepared by hybrid filtered vacuum arc process
    Lee, CS
    Lee, KR
    Eun, KY
    Yoon, KH
    Han, JH
    DIAMOND AND RELATED MATERIALS, 2002, 11 (02) : 198 - 203
  • [34] PROPERTIES OF TETRAHEDRAL AMORPHOUS-CARBON FILMS DEPOSITED IN A FILTERED CATHODIC ARC IN THE PRESENCE OF HYDROGEN
    DAVIS, CA
    VEERASAMY, VS
    AMARATUNGA, GAJ
    MILNE, WI
    MCKENZIE, DR
    PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 1994, 69 (06): : 1121 - 1131
  • [35] Electron field emission from Ti-containing tetrahedral amorphous carbon films deposited by filtered cathodic vacuum arc
    Ding, XZ
    Li, YJ
    Sun, Z
    Tay, BK
    Lau, SP
    Chen, GY
    Cheung, WY
    Wong, SP
    JOURNAL OF APPLIED PHYSICS, 2000, 88 (11) : 6842 - 6847
  • [36] Tribological properties of multilayer tetrahedral amorphous carbon coatings deposited by filtered cathodic vacuum arc deposition
    Young-Jun JANG
    Jae-Il KIM
    Woo Young LEE
    Jongkuk KIM
    Friction, 2021, 9 (05) : 1292 - 1302
  • [37] Tribological properties of multilayer tetrahedral amorphous carbon coatings deposited by filtered cathodic vacuum arc deposition
    Young-Jun Jang
    Jae-Il Kim
    WooYoung Lee
    Jongkuk Kim
    Friction, 2021, 9 : 1292 - 1302
  • [38] Tribological properties of multilayer tetrahedral amorphous carbon coatings deposited by filtered cathodic vacuum arc deposition
    Jang, Young-Jun
    Kim, Jae-Il
    Lee, WooYoung
    Kim, Jongkuk
    FRICTION, 2021, 9 (05) : 1292 - 1302
  • [39] Techniques for filtering graphite macroparticles in the cathodic vacuum arc deposition of tetrahedral amorphous carbon films
    Hakovirta, M
    Tiainen, VM
    Pekko, P
    DIAMOND AND RELATED MATERIALS, 1999, 8 (07) : 1183 - 1192
  • [40] A tribological study of tetrahedral amorphous carbon films prepared by filtered cathodic vacuum arc technique
    Yu, X
    Zhang, X
    Wang, CB
    Hua, M
    Wang, LG
    VACUUM, 2004, 75 (03) : 231 - 236