Heat affected zone creep characterization of INCOLOY 800H by means of small punch test

被引：12

作者：

Nafari, M. ^{[1
]}

Golezani, A. Salemi ^{[1
]}

机构：

[1] Islamic Azad Univ, Dept Mat Engn, Karaj Branch, Karaj, Iran

来源：

ENGINEERING FAILURE ANALYSIS | 2018年 / 94卷

关键词：

Small punch creep; Weldment; Microstructure; Heat affected zone; Direct current electrode negative; AUSTENITIC STAINLESS-STEEL; DISSIMILAR WELDS; MECHANICAL-PROPERTIES; P92; STEEL;

D O I：

10.1016/j.engfailanal.2018.08.020

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This work is about evaluation of creep characterizationsof INCOLOY 800H and it's weldment-which has high demand in use in Power Plant and Oil & Gas industries. Small Punch Creep Test is used here to find the weakest location in creep consideration of INCOLOY 800H weldment. Tests are performed under 350 N, 450 N at temperature of 700 degrees C. Test specimens were machined from different parts of weldments and prepared in shape of thin disks including Base Metal, Weld Metal and HAZ (heat affected zone) near base metal. To verify the dependence of creep characterization to microstructure, the test results were compared to each other of each location.

引用

页码：407 / 411

页数：5

共 50 条

[41] INFLUENCE OF AL AND TI ON HOT CRACKING SENSITIVITY OF WELD HEAT-AFFECTED ZONE IN INCOLOY-800 THROUGH HOT DUCTILITY CHARACTERISTICS
SAITO, K
AOKI, M
KONDO, H
[J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (07) : 580 - 589
[42] High-temperature corrosion model of Incoloy 800H alloy connected with Ni-201 in MgCl2-KCl heat transfer fluid
Peng, Yuxiang
Imam, Muhammad A.
Reddy, Ramana G.
[J]. HIGH TEMPERATURE MATERIALS AND PROCESSES, 2023, 42 (01)
[43] Fracture Characterization of Steels by Means of Un-Notched and Notched Small Punch Test Samples
Garcia, T. E.
Belzunce, F. J.
Rodriguez, C.
Penuelas, I.
[J]. DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES, 2ND INTERNATIONAL CONFERENCE SSTT, 2012, : 147 - 153
[44] High-temperature corrosion rate and diffusion modelling of Ni-coated incoloy 800H alloy in MgCl2-KCl heat transfer fluid
Peng, Yuxiang
Shinde, Pravin S.
Reddy, Ramana G.
[J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2022, 243
[45] Experimental and Numerical Investigations on the Creep Behaviour of Heat-Resisting Chromium Steel X10CrMoVnb9-1 by Means of Small Punch Test
Marcel Selent
Martin Abendroth
Meinhard Kuna
[J]. Transactions of the Indian Institute of Metals, 2016, 69 : 629 - 633
[46] Experimental and Numerical Investigations on the Creep Behaviour of Heat-Resisting Chromium Steel X10CrMoVnb9-1 by Means of Small Punch Test
Selent, Marcel
Abendroth, Martin
Kuna, Meinhard
[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (02) : 629 - 633
[47] Investigation of small punch creep damage and rupture behavior in 347H stainless steel by means of experiments and a numerical simulation
Jiang, Tao
Zhong, Jiru
Guan, Kaishu
[J]. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 130
[48] Characterization of a 14Cr ODS steel by means of small punch and uniaxial testing with regard to creep and fatigue at elevated temperatures
Bruchhausen, M.
Turba, K.
de Haan, F.
Hahner, P.
Austin, T.
de Carlan, Y.
[J]. JOURNAL OF NUCLEAR MATERIALS, 2014, 444 (1-3) : 283 - 291
[49] Creep rates of heat-affected zone of grade 91 pipe welds as determined by stress-relaxation test
Li, Leijun
Silwal, Bishal
Deceuster, Andrew
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2016, 146 : 95 - 103
[50] Optical characterization of the heat-affected zone in laser patterning of thin film a-Si:H
Molpeceres, Carlos L.
Colina, Monica
Holgado, Miguel
Morales, Miguel
Sanchez-Aniorte, Isabel
Lauzurica, Sara
Garcia-Ballesteros, Juan J.
Ocana, Jose L.
[J]. LASER-BASED MICRO- AND NANOPACKAGING AND ASSEMBLY III, 2009, 7202

← 1 2 3 4 5 →