Heat affected zone creep characterization of INCOLOY 800H by means of small punch test

被引：12
|
作者：
Nafari, M. [1 ]
Golezani, A. Salemi [1 ]
机构：
[1] Islamic Azad Univ, Dept Mat Engn, Karaj Branch, Karaj, Iran
来源：
ENGINEERING FAILURE ANALYSIS | 2018年 / 94卷
关键词：
Small punch creep; Weldment; Microstructure; Heat affected zone; Direct current electrode negative; AUSTENITIC STAINLESS-STEEL; DISSIMILAR WELDS; MECHANICAL-PROPERTIES; P92; STEEL;
D O I：
10.1016/j.engfailanal.2018.08.020
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This work is about evaluation of creep characterizationsof INCOLOY 800H and it's weldment-which has high demand in use in Power Plant and Oil & Gas industries. Small Punch Creep Test is used here to find the weakest location in creep consideration of INCOLOY 800H weldment. Tests are performed under 350 N, 450 N at temperature of 700 degrees C. Test specimens were machined from different parts of weldments and prepared in shape of thin disks including Base Metal, Weld Metal and HAZ (heat affected zone) near base metal. To verify the dependence of creep characterization to microstructure, the test results were compared to each other of each location.
引用
收藏
页码：407 / 411
页数：5
相关论文
共 50 条
  • [1] Creep behaviors evaluation of Incoloy800H by small punch creep test
    Yang, Sisheng
    Ling, Xiang
    Zheng, Yangyan
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 685 : 1 - 6
  • [2] Assessment of mechanical properties of Incoloy800H by means of small punch test and inverse analysis
    Yang, Sisheng
    Cao, You
    Ling, Xiang
    Qian, Yang
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 695 : 2499 - 2505
  • [3] Theoretical and experimental analysis on the small punch creep deformation of Incoloy800H
    Yang, Sisheng
    Ling, Xiang
    [J]. ENGINEERING FAILURE ANALYSIS, 2018, 84 : 220 - 228
  • [4] Mechanical properties characterization of heat-affected zone using the small punch test
    Rodríguez, C.
    García Cabezas, J.
    Cárdenas, E.
    Belzunce, F.J.
    Betegón, C.
    [J]. Welding Journal (Miami, Fla), 2009, 88 (09):
  • [5] Heat treatment effect on CNC turning of Incoloy 800H superalloy
    Palanisamy, A.
    Selvaraj, T.
    Sivasankaran, S.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2018, 33 (14) : 1594 - 1601
  • [6] Mechanical Properties Characterization of Heat-Affected Zone Using the Small Punch Test
    Rodriguez, C.
    Cabezas, J. Garcia
    Cardenas, E.
    Belzunce, F. J.
    Betegon, C.
    [J]. WELDING JOURNAL, 2009, 88 (09) : 188S - 192S
  • [7] Specimen size effect on evaluation of strength properties of 3Cr1MoV and Incoloy 800H using small punch test
    Wang, Wulin
    Xu, Tong
    Zhong, Jiru
    Guan, Kaishu
    Shang, Yantao
    Zhang, Xiaocheng
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 832
  • [8] Characterization of crack propagation of Incoloy 800H by the combination of DIC and XFEM
    Shuai, Jianguang
    Zhao, Jiaqing
    Lei, Liping
    Zeng, Pan
    Wu, Xinxin
    Sun, Libin
    [J]. NUCLEAR ENGINEERING AND DESIGN, 2020, 364
  • [9] Influence of heat treatment on the mechanical and tribological properties of Incoloy 800H Superalloy
    A. Palanisamy
    N. Jeyaprakash
    V. Sivabharathi
    S. Sivasankaran
    [J]. Archives of Civil and Mechanical Engineering, 21
  • [10] Influence of heat treatment on the mechanical and tribological properties of Incoloy 800H Superalloy
    Palanisamy, A.
    Jeyaprakash, N.
    Sivabharathi, V.
    Sivasankaran, S.
    [J]. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2021, 21 (01)
12345