CARBON NANOFIBER COMPOSITE WITH EPDM AND POLYIMIDE FOR HIGH-TEMPERATURE INSULATION

Elastomers and their composites are extensively used as a thermal insulation system in heat treatment, power generation, fire protection, and aerospace. Among different elastomers, low-density ethylene propylene diene terpolymer (EPDM) has interesting properties, such as excellent resistance to aging and oxidative degradation due to its saturated back bone. Furthermore, introduction of polyimide (PI) to the base elastomer increases its thermal stability. On the other hand, carbon nanofiber (CNF) reinforces the matrix to enhance the mechanical properties with an additional advantage of better char yield. To achieve better rubber-filler compatibilization, modification of EPDM was carried out by grafting with maleic anhydride (MAH). Morphological studies by scanning electron microscopy and high-resolution transmission electron microscopy exhibited uniform dispersion of nanofillers throughout MAH grafted EPDM matrix. Thermal properties of the EPDM/PI nanocomposites were characterized by thermogravimetric analysis and differential scanning calorimetry. Besides these, thermal conductivity, thermal diffusivity, and specific heat were also measured. PI- and CNF-filled maleated EPDM composites showed very good physical and thermomechanical properties for high-temperature insulation compound.