Penetration of a high-speed projectile into carbon steels at low temperatures

被引：0
|
作者：
Tanaka, K [1 ]
Nishida, M [1 ]
Takahashi, M [1 ]
机构：
[1] Nagoya Inst Technol, Grad Sch, Dept Engn Phys Elect & Mech, Showa Ku, Nagoya, Aichi 4668555, Japan
来源：
SPACE DEBRIS AND SPACE TRAFFIC MANAGEMENT SYMPOSIUM 2003 | 2004年 / 109卷
关键词：
D O I：
暂无
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
In order to examine the effect of low temperature brittleness on the impact-induced fracture of materials, the penetration and perforation behavior of carbon steel plates caused by the impact of high-speed projectiles are investigated experimentally. Three kinds of steel plates with different carbon contents are refrigerated from room temperature to about -180 degree centigrade and impacted by small cylindrical steel projectiles using a two-stage light gas gun. The impact velocity is ranged from about 0.9 km/s to 2.1 km/s. Impact-induced craters, fragmentations and spalls at low temperature are examined comparing with them at room temperatures. Impact-induced pressures in the target plates are measured with manganese gauges. Also, a shock code AUTODYN-2D is used to simulate the penetration and perforation process.
引用
收藏
页码：319 / 334
页数：16
相关论文
共 50 条
  • [21] CARBON CONTENT IN TUNGSTENLESS POWDERED HIGH-SPEED STEELS
    POPANDOPULO, AN
    KALININA, VI
    [J]. METAL SCIENCE AND HEAT TREATMENT, 1990, 32 (3-4) : 229 - 231
  • [22] GENERATION OF HIGH-SPEED LIQUID JETS BY HIGH-SPEED IMPACT OF A PROJECTILE
    SHI, HH
    TAKAYAMA, K
    [J]. JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 1995, 38 (02): : 181 - 190
  • [23] MECHANICAL-PROPERTIES OF CAST HIGH-SPEED STEELS AT HIGH-TEMPERATURES
    BUZHINSKII, EA
    PETRENKO, VV
    GAIKO, VA
    [J]. METAL SCIENCE AND HEAT TREATMENT, 1977, 19 (11-1) : 963 - 965
  • [24] HARDENING SALT BATHS FOR HEAT-TREATMENT OF TOOL STEELS AND HIGH-SPEED STEELS IN RANGE OF LOW, MEDIUM AND HIGH-TEMPERATURES
    PELCZYNSKI, T
    [J]. MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1975, 48 (09): : 459 - 461
  • [25] An Investigation of the Tribological Behaviour of High-Speed Tool Steels at Elevated Temperatures
    Walter, M.
    Egels, G.
    Boes, J.
    Roettger, A.
    Theisen, W.
    [J]. HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2016, 71 (04): : 148 - 153
  • [26] High-speed penetration into sand
    Savvateev, AF
    Budin, AV
    Kolikov, VA
    Rutberg, PG
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2001, 26 (1-10) : 675 - 681
  • [27] SEMI HIGH-SPEED STEELS WITH HIGH-SPEED STEEL PERFORMANCE
    FREDRIKSSON, B
    ATTLEGARD, M
    [J]. JOURNAL OF METALS, 1979, 31 (12): : 112 - 112
  • [28] CARBON DIFFUSION IN ALPHA-PHASE OF HIGH-SPEED STEELS
    ZEMSKIY, SV
    ISAKOV, MG
    KUPALOVA, IK
    [J]. PHYSICS OF METALS AND METALLOGRAPHY-USSR, 1969, 28 (04): : 105 - &
  • [29] MICROSTRUCTURE OF RAPIDLY SOLIDIFIED HIGH-SPEED AND CARBON TOOL STEELS
    YOSHIDA, C
    YASUNAKA, H
    NOZAKI, T
    [J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (10) : 819 - 822
  • [30] MODERN HIGH-SPEED STEELS
    GELLER, YA
    [J]. METAL SCIENCE AND HEAT TREATMENT, 1977, 19 (9-10) : 867 - 873
12345