The temperature measurements in the formation zone during high-pressure jet cutting

被引：0

作者：

Petukhov, Evgeniy ^{[1
]}

Romodanovskaya, Mariya ^{[2
]}

机构：

[1] OOO Vladimirskiy Stancostroitelny Zavod Techn, 24 G Kuibyshev St, Vladimir 600035, Russia

[2] Vladimir State Univ, 87 Gorky St, Vladimir 600000, Russia

来源：

MATERIALS TODAY-PROCEEDINGS | 2019年 / 19卷

关键词：

Jet cutting; Formation zone; Temperature; Thermal imager; Thermocouple;

D O I：

10.1016/j.matpr.2019.08.111

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Jet cutting is accompanied by heat generation. The temperature in the formation zone is an important safety indicator when using jet technologies for processing combustible and explosive materials. Experimental studies of the temperature characteristics of the hydro-cutting process were carried out on samples of Plexiglas, titanium alloy and marble. The measurements were performed using an infrared thermal imager and the method of "running" thermocouple. The temperature characteristics in the formation zone do not exceed 70 degrees C, which makes it possible to use jet cutting in processing of any material. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：2471 / 2474

页数：4

共 50 条

[41] ESTIMATION AND MEASUREMENTS OF PH IN HIGH-TEMPERATURE AND HIGH-PRESSURE SOUR ENVIRONMENTS
MIYASAKA, A
DENPO, K
OGAWA, H
ISIJ INTERNATIONAL, 1989, 29 (01) : 85 - 91
[42] Experimental Study on Effect of Layouts of TBM Cutter and High-pressure Water Jet on Cutting Efficiency
Zhang, Jin-Liang
Xu, Hong-Yi
Gong, Qiu-Ming
Yang, Feng-Wei
Song, Chang-Jie
Zhongguo Gonglu Xuebao/China Journal of Highway and Transport, 2024, 37 (07): : 204 - 217
[43] HIGH-PRESSURE HIGH-TEMPERATURE VISUAL CELL FOR INTERFACIAL TENSION MEASUREMENTS
SCHOETTLE, VO
JENNINGS, HY
REVIEW OF SCIENTIFIC INSTRUMENTS, 1968, 39 (03): : 386 - +
[44] Intelligent means of process control during the high pressure water jet cutting
Westkamper, E
Gottwald, B
Henning, A
IECON '98 - PROCEEDINGS OF THE 24TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-4, 1998, : 2361 - 2365
[45] A comparison of temperature reduction in high-pressure jet-assisted turning using high pressure versus high flowrate
Dahlman, P
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (04) : 467 - 473
[46] THE APPLICATION OF CARS FOR TEMPERATURE-MEASUREMENTS IN HIGH-PRESSURE COMBUSTION SYSTEMS
WOYDE, M
STRICKER, W
APPLIED PHYSICS B-PHOTOPHYSICS AND LASER CHEMISTRY, 1990, 50 (06): : 519 - 525
[47] High-Pressure Optical Measurements of Temperature at Turbine Rotor Inlet Conditions
Egbert, Scott C.
Zeltner, Darrel
Rezasoltani, Mohsen
Tree, Dale R.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2021, 143 (05):
[48] High-pressure and high-temperature differential scanning calorimeter for combined pressure-concentration-temperature measurements of hydrides
Mauron, Ph.
Bielmann, M.
Bissig, V.
Remhof, A.
Zuettel, A.
REVIEW OF SCIENTIFIC INSTRUMENTS, 2009, 80 (09):
[49] Temperature calibration of a high-pressure DSC for measurements in ammonia - Dependence of calibration parameters on pressure
van Ekeren, P. J.
Bevers, E. R. T.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2007, 90 (03) : 931 - 934
[50] Cutting with high-pressure liquid jets (review)
Legoshin, G.M.
Glass and Ceramics (English translation of Steklo i Keramika), 1991, 47 (9-10): : 341 - 344

← 1 2 3 4 5 →