Smelting Reduction of Iron Ore-Coal Composite Pellets

被引：4

作者：

Sah, R. ^{[1
]}

Dutta, S. K. ^{[2
]}

机构：

[1] Smt SR Patel Engn Coll, Mehsana 384170, Gujarat, India

[2] Maharaja Sayajirao Univ Baroda, Fac Tech & Engg, Met & Mat Engg Dept, Vadodara 390001, Gujarat, India

来源：

STEEL RESEARCH INTERNATIONAL | 2010年 / 81卷 / 06期

关键词：

Composite pellet; Cold bonding; Reduction; Smelting; Kinetics; dissolution; Iron ore; Coal; HEARTH FURNACE PROCESS; MOLTEN SLAG; VOLATILE REDUCTION; OXIDE REDUCTION; PREREDUCED IRON; SOLID CARBON; KINETICS; FEO; HEMATITE; MECHANISM;

D O I：

10.1002/srin.200900113

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Smelting reduction of iron ore-coal composite pellets has been carried out in an induction furnace. The pellets, tied with tungsten wire, were immersed into the liquid metal bath. The experiments were carried out in the temperature range of 1713 K to 1733K. For 16-18 mm diameter pellets, it was observed that (i) the time required for complete dissolution in liquid metal bath is 83-90 seconds, (ii) the fraction of reduction for 40 seconds of immersion varied from 0.68-0.87 for Jharia coal pellets and 0.73-0.92 for Bhilai coal pellets, and (iii) the fraction of reduction increases with decreasing Fe/C ratio and increasing immersion period. X-ray diffraction (XRD)of reduced pellets showed that the reduction occurred topochemically. Scanning electron microscopic (SEM) examination of partially reduced pellets evinced the structural changes in pellets. The present investigation aims to assess the effect of Fe/C ratio in pellet, volatile matter in coal, and time of pellet immersion into liquid metal bath on reduction of iron ore-coal composite pellets.

引用

页码：426 / 433

页数：8

共 50 条

[41] THERMOCHEMISTRY OF ORE-COAL PELLET REDUCTION
KOZHEVNIKOV, IY
GULTYAY, II
RUSSIAN METALLURGY-METALLY-USSR, 1969, (03): : 5 - +
[42] Study on Direct Reduction of Low-Grade Iron Ore-Coal Mini-pellets in Coal-Based Rotary Kiln
Liang, Zhikai
Huang, Zhucheng
Yi, Lingyun
Zhong, Ronghai
9TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2018, : 465 - 475
[43] A finite control volume method for the reduction of an iron ore-coal composite pellet in an axisymmetric temperature field
Shi, JY
McElwain, DLS
Donskoi, E
CURRENT TRENDS IN SCIENTIFIC COMPUTING, 2003, 329 : 299 - 306
[44] Reduction kinetics of iron ore-coal pellet during fast heating
Wang, Q.
Yang, Z.
Tian, J.
Li, W.
Sun, J.
Ironmaking and Steelmaking, 1998, 25 (06): : 443 - 447
[45] Particularities in strengthening the ore-coal pellets with streams of compressed air
Pavlovets, V.M.
2001, Izdatel'stvo Moskovskogo Instituta Stali i Splavov
[46] DETERMINATION OF SPECIFIC HEAT OF ORE-COAL PELLETS DURING METALLIZATION
STOROZHE.YI
TELEGIN, AS
ZAVARZIN, VP
STEEL IN THE USSR, 1971, 1 (05): : 331 - &
[47] Mathematical Model to Estimate the Rate Parameters and Thermal Efficiency for the Reduction of Iron Ore-Coal Composite Pellets in Multi-layer Bed at Rotary Hearth Furnace
Kumari, Vandana
Roy, G. G.
Sen, P. K.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 (01) : 109 - 116
[48] Mathematical modelling of non-isothermal reduction in highly swelling iron ore-coal char composite pellet
Donskoi, E
McElwain, DLS
IRONMAKING & STEELMAKING, 2001, 28 (05) : 384 - 389
[49] Insight of iron ore-coal composite reduction in a pilot scale rotary kiln: A post-mortem study
Liang, Zhikai
Yi, Lingyun
Huang, Zhucheng
Lu, Biao
Jiang, Xiong
Cai, Wei
Tian, Baizhou
Jin, Yunyun
POWDER TECHNOLOGY, 2019, 356 : 691 - 701
[50] INVESTIGATION OF TECHNICAL PARAMETERS IN PRODUCTION OF PARTLY REDUCED ORE-COAL PELLETS
SPEKTOR, AN
POKHVISN.AN
YARKHO, EN
RUSSIAN METALLURGY, 1966, (01): : 3 - &

← 1 2 3 4 5 →