Smelting Reduction of Iron Ore-Coal Composite Pellets

被引：4

作者：

Sah, R. ^{[1
]}

Dutta, S. K. ^{[2
]}

机构：

[1] Smt SR Patel Engn Coll, Mehsana 384170, Gujarat, India

[2] Maharaja Sayajirao Univ Baroda, Fac Tech & Engg, Met & Mat Engg Dept, Vadodara 390001, Gujarat, India

来源：

STEEL RESEARCH INTERNATIONAL | 2010年 / 81卷 / 06期

关键词：

Composite pellet; Cold bonding; Reduction; Smelting; Kinetics; dissolution; Iron ore; Coal; HEARTH FURNACE PROCESS; MOLTEN SLAG; VOLATILE REDUCTION; OXIDE REDUCTION; PREREDUCED IRON; SOLID CARBON; KINETICS; FEO; HEMATITE; MECHANISM;

D O I：

10.1002/srin.200900113

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Smelting reduction of iron ore-coal composite pellets has been carried out in an induction furnace. The pellets, tied with tungsten wire, were immersed into the liquid metal bath. The experiments were carried out in the temperature range of 1713 K to 1733K. For 16-18 mm diameter pellets, it was observed that (i) the time required for complete dissolution in liquid metal bath is 83-90 seconds, (ii) the fraction of reduction for 40 seconds of immersion varied from 0.68-0.87 for Jharia coal pellets and 0.73-0.92 for Bhilai coal pellets, and (iii) the fraction of reduction increases with decreasing Fe/C ratio and increasing immersion period. X-ray diffraction (XRD)of reduced pellets showed that the reduction occurred topochemically. Scanning electron microscopic (SEM) examination of partially reduced pellets evinced the structural changes in pellets. The present investigation aims to assess the effect of Fe/C ratio in pellet, volatile matter in coal, and time of pellet immersion into liquid metal bath on reduction of iron ore-coal composite pellets.

引用

页码：426 / 433

页数：8

共 50 条

[1] Mass Loss and Direct Reduction Characteristics of Iron Ore-coal Composite Pellets
Yi MAN
Jun-xiao FENG
Yan-mei CHEN
Jing-zhi ZHOU
Journal of Iron and Steel Research(International), 2014, 21 (12) : 1090 - 1094
[2] Influence of temperature and time on reduction behavior in iron ore-coal composite pellets
Man, Y.
Feng, J. X.
Li, F. J.
Ge, Q.
Chen, Y. M.
Zhou, J. Z.
POWDER TECHNOLOGY, 2014, 256 : 361 - 366
[3] Effect of particle size on reduction behavior in iron ore-coal composite pellets
Man, Yi
Feng, Junxiao
Ge, Qi
Li, Fujie
Journal of Chemical and Pharmaceutical Research, 2014, 6 (07) : 2484 - 2490
[4] Mass Loss and Direct Reduction Characteristics of Iron Ore-coal Composite Pellets
Man, Yi
Feng, Jun-xiao
Chen, Yan-mei
Zhou, Jing-zhi
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2014, 21 (12) : 1090 - 1094
[5] Mass Loss and Direct Reduction Characteristics of Iron Ore-Coal Composite Pellets
Yi Man
Jun-xiao Feng
Yan-mei Chen
Jing-zhi Zhou
Journal of Iron and Steel Research International, 2014, 21 : 1090 - 1094
[6] Carbothermic Reduction of Ore-Coal Composite Pellets in a Tall Pellets Bed
Jiang, Xin
Ding, Guangen
Guo, He
Gao, Qiangjian
Shen, Fengman
MINERALS, 2018, 8 (12):
[7] Effects of Binder on the Properties of Iron Ore-Coal Composite Pellets
Sah, R.
Dutta, S. K.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2010, 31 (02): : 73 - 85
[8] SPONGE IRON FINES AS A BINDER IN ORE-COAL COMPOSITE PELLETS
GANGULY, A
PATALAH, AA
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1990, 43 (05): : 288 - 293
[9] Reduction Efficiency of Iron Ore-Coal Composite Pellets in Tunnel Kiln For Sponge Iron Production
Khattoi, S. C.
Roy, G. G.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 (05) : 683 - 692
[10] Manufacturing and Application of Metalized Ore-Coal Pellets in Synthetic Pig Iron Smelting
Nokhrina, O. I.
Rozhikhina, I. D.
Khodosov, I. E.
VII INTERNATIONAL SCIENTIFIC PRACTICAL CONFERENCE INNOVATIVE TECHNOLOGIES IN ENGINEERING, 2016, 142

← 1 2 3 4 5 →