Adhesive bonding of 3D-printed plastic components

被引：23

作者：

Leicht, Heinrich ^{[1
]}

Orf, Lukas ^{[1
]}

Hesselbach, Julian ^{[1
]}

Vudugula, Hemanth ^{[1
]}

Kraus, Eduard ^{[1
]}

Baudrit, Benjamin ^{[1
]}

Hochrein, Thomas ^{[1
]}

Bastian, Martin ^{[1
]}

机构：

[1] SKZ KFE gGmbH, Joining & Surface Engn, Wurzburg, Germany

来源：

JOURNAL OF ADHESION | 2020年 / 96卷 / 1-4期

关键词：

Additive manufacturing; surface treatment by exited gases (eg; flame; corona; plasma); epoxy; epoxides; polymers; SURFACE; DESIGN;

D O I：

10.1080/00218464.2019.1682561

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Tensile strength of adhesive bonds with three different commercial epoxy resins and laser sintered polyamide 12 (PA 12) has been evaluated by means of Centrifugal Adhesion Testing Technology (CATT, LUMiFrac Adhesion Analyzer). Different post treatment states (as received and chemically smoothed) and pre-treatment states (as received and atmospheric plasma) of the PA 12 surface have been considered. It has been shown that the epoxy resins infiltrate the surface porosity of the laser sintered material, which leads to a special fracture pattern. Tensile strength of the adhesive bonds has been significantly improved after atmospheric plasma pretreatment. Chemical smoothing had a neglicable effect on the tensile strength of the tested specimens, but lead to a change in fracture pattern, especially without atmosphric plasma pretreatment.

引用

页码：48 / 63

页数：16

共 50 条

[21] Effect of roughness and adhesive on the strength of concrete-to-concrete interfaces cast from 3D-printed prefabricated plastic formworks
Zhao, Kang
Hu, Zhongjun
Wang, Boxin
Li, Quanheng
Xu, Yan
[J]. CONSTRUCTION AND BUILDING MATERIALS, 2023, 368
[22] 3D-PRINTED THERMOPLASTICS
不详
[J]. ADVANCED MATERIALS & PROCESSES, 2021, 179 (04): : 9 - 9
[23] 3D-printed minimalists
Gross, Heinz
Gross, Sebastian
Nobrega, Miguel J.
Vidal, Joao P.O.
[J]. Kunststoffe International, 2019, 109 (1-2): : 40 - 43
[24] A strategy for the improvement of the bonding performance of 3D-printed concrete interlayer interfaces
Cao, Jing
E, Shengzhao
Yang, Yi
Shi, Yaming
Chai, Junrui
Xu, Zengguang
[J]. JOURNAL OF BUILDING ENGINEERING, 2024, 97
[25] A 3D-Printed Computer
Shirmohammadli, Vahideh
Bahreyni, Behraad
[J]. ADVANCED INTELLIGENT SYSTEMS, 2023, 5 (08)
[26] 3D-printed microboat
不详
[J]. NATURE, 2020, 587 (7835) : 527 - 527
[27] 3D-Printed Microfluidics
Au, Anthony K.
Huynh, Wilson
Horowitz, Lisa F.
Folch, Albert
[J]. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 2016, 55 (12) : 3862 - 3881
[28] Comparison of cell casted and 3D-printed plastic scintillators for dosimetry applications
Kulig, D.
Kaplon, L.
Moskal, G.
Beddar, S.
Fiutowski, T.
Gorska, W.
Hajduga, J.
Jurgielewicz, P.
Kabat, D.
Kalecinska, K.
Kopec, M.
Koperny, S.
Mindur, B.
Moron, J.
Niedzwiecki, S.
Silarski, M.
Sobczuk, F.
Szumlak, T.
Rucinski, A.
[J]. RADIATION PROTECTION DOSIMETRY, 2023, 199 (15-16) : 1824 - 1828
[29] Deformation behaviour of 3D-printed concrete elements induced by plastic shrinkage
Markin, Slava
Cordova, Julian A.L.
Combrinck, Riaan
Mechtcherine, Viktor
[J]. Construction and Building Materials, 2024, 449
[30] Investigation of the light output of 3D-printed plastic scintillators for dosimetry applications
Kaplon, L.
Kulig, D.
Beddar, S.
Fiutowski, T.
Gorska, W.
Hajduga, J.
Jurgielewicz, P.
Kabat, D.
Kalecinska, K.
Kopec, M.
Koperny, S.
Mindur, B.
Moron, J.
Moskal, G.
Niedzwiecki, S.
Silarski, M.
Sobczuk, F.
Szumlak, T.
Rucinski, A.
[J]. RADIATION MEASUREMENTS, 2022, 158

← 1 2 3 4 5 →