Test of Thrust Bearing of a Multiplier Centrifugal Compressor

被引：0

作者：

Sokolov, N., V ^{[1
,2
]}

Maksimov, T., V ^{[1
]}

Khadiev, M. B. ^{[1
]}

Sagbiev, I. R. ^{[1
]}

机构：

[1] Kazan Natl Res Technol Univ, Fac Power Engn, Dept Compressor Machines & Installat, 68 Karl Marx Str, Kazan 420015, Russia

[2] JSC NIIturbocompressor, 40 Sibirsky Trakt, Kazan 420029, Russia

来源：

OIL AND GAS ENGINEERING (OGE-2020) | 2020年 / 2285卷

关键词：

D O I：

10.1063/5.0027306

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

The article describes the design of the experimental stand and the measurement system necessary for taking and recording readings of instrumentation and automation equipment. The basis of the stand is a centrifugal compressor unit of the multiplier type. The analysis of the results of experimental studies of a thrust sliding bearing with fixed pads at nominal and transient modes of operation of a centrifugal compressor with a closed impeller is given. The pulsations of the oil pressure in the bearing layer and the temperature of the working surface were measured at different rotor speeds depending on the lubricant supply temperature.

引用

下载

页数：7

共 50 条

[31] Aerodynamics performance test of a high-speed miniature centrifugal compressor
Zhou, Lei
Acharya, Dipjyoti
Kapat, Jayanta
Chow, Louis
Arakere, Nagaraj
PROCEEDINGS OF THE ENERGY SUSTAINABILITY CONFERENCE 2007, 2007, : 371 - 378
[32] Centrifugal compressor design
Came, PM
Robinson, CJ
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1999, 213 (02) : 139 - 155
[33] Selecting a Centrifugal Compressor
Sorokes, James M.
CHEMICAL ENGINEERING PROGRESS, 2013, 109 (06) : 44 - 51
[34] Centrifugal compressor design
Came, PM
Robinson, CJ
CFD IN FLUID MACHINERY DESIGN, 1998, 1998 (13): : 27 - 58
[35] Selecting a centrifugal compressor
Sorokes, J.M., 1600, American Institute of Chemical Engineers (109):
[36] Huge centrifugal compressor
Grun, W
Kluge, F
ZEITSCHRIFT DES VEREINES DEUTSCHER INGENIEURE, 1941, 85 : 157 - 162
[37] Regulation of centrifugal compressor
Kluge, F
ZEITSCHRIFT DES VEREINES DEUTSCHER INGENIEURE, 1940, 84 : 837 - 843
[38] Centrifugal compressor design
Came, P.M.
Robinson, C.J.
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering, 1999, 213 (02): : 139 - 155
[39] Centrifugal compressor design
Came, P.M.
Robinson, C.J.
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 213 (02): : 139 - 155
[40] A pressure output feedback control of turbo compressor surge with a thrust magnetic bearing actuator
Ahn, Hyeong-Joon
Park, Min-Seop
Sanadgol, Dorsa
Park, In-Hwang
Han, Dong-Chul
Maslen, Eric H.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (05) : 1406 - 1414

← 1 2 3 4 5 →