Fatigue performance of production-quality aircraft fastener holes

被引：33
|
作者：
Ralph, W. Carter [1 ]
Johnson, W. Steven
Makeev, Andrew
Newman, James C., Jr.
机构：
[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA
[2] Delta Air Lines, Atlanta, GA USA
[3] Mississippi State Univ, Dept Aerosp Engn, Starkville, MS USA
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2007年 / 29卷 / 07期
关键词：
fastener hole; drilling; hole quality; pilot hole;
D O I：
10.1016/j.ijfatigue.2006.10.016
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A two part study was conducted on the effects of hole drilling on the fatigue life of aircraft rivet holes in 2024-T3 aircraft quality aluminum. The first part of the study determined the drilling parameters that had the greatest effect on hole quality. In this, the second part of the study, the fatigue lives resulting from these drilling parameters are compared. It was found that machining marks play a greater role than residual stress in the fatigue life of production-quality holes. Machine drilling greatly reduces machining marks, increasing fatigue life by almost a factor of three. Dull bits appear to increase residual stress, but also increase machining marks, resulting in an approximately equal overall fatigue life. (C) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1319 / 1327
页数：9
相关论文
共 50 条
  • [21] Production-quality proof-carrying code
    Lee, P
    PRACTICAL ASPECTS OF DECLARATIVE LANGUAGES, 2000, 1753 : 325 - 325
  • [22] Modified Split Mandrel Method and Equipment to Improve the Fatigue Performance of Structural Components with Fastener Holes
    Maximov, Jordan
    Duncheva, Galya
    Anchev, Angel
    Dunchev, Vladimir
    Daskalova, Petya
    METALS, 2024, 14 (03)
  • [23] Prediction of fatigue performance of fastener holes with bolt clamping force based on critical plane approach
    Liu, J.
    Kang, J. X.
    Yan, W. Z.
    Wang, F. S.
    Yue, Z. F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (15): : 3510 - 3514
  • [24] A SWEPT FREQUENCY EMAT SYSTEM FOR DETECTING CRACKS IN AIRCRAFT FASTENER HOLES
    MARTIN, JF
    HODGETTS, PJ
    HOUSTON, RH
    THOMPSON, RB
    VASILE, CF
    IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1980, 27 (03): : 174 - 174
  • [25] Finite element analysis of fatigue behavior at countersunk fastener holes
    College of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China
    Xie, W., 1600, Northwestern Polytechnical University (31):
  • [26] The effect of cold expansion on improving the fatigue life of fastener holes
    Chakherlou, TN
    Vogwell, J
    ENGINEERING FAILURE ANALYSIS, 2003, 10 (01) : 13 - 24
  • [27] Solid Edge 3.0 - A production-quality product
    Yares, E
    COMPUTER GRAPHICS WORLD, 1997, 20 (07) : 65 - 66
  • [28] AN HDTV COMPRESSION SCHEME FOR PRODUCTION-QUALITY RECORDING AND HIGH-PERFORMANCE SHUTTLE OPERATION
    MCLAREN, DL
    GERSHO, A
    IEEE TRANSACTIONS ON CONSUMER ELECTRONICS, 1993, 39 (03) : 175 - 185
  • [29] OPTIMIZATION OF PRODUCTION-QUALITY MONITORING BY MEANS OF SPECTRAL INSTRUMENTS
    ONISHCHENKO, AM
    ATOMIC ENERGY, 1992, 73 (02) : 658 - 665
  • [30] AN OVERVIEW OF THE PRODUCTION-QUALITY COMPILER-COMPILER PROJECT
    LEVERETT, BW
    CATTELL, RGG
    HOBBS, SO
    NEWCOMER, JM
    REINER, AH
    SCHATZ, BR
    WULF, WA
    COMPUTER, 1980, 13 (08) : 38 - 49
12345