Experimental Study of Material Removal Rate in Electrical Discharge Turning of Titanium Alloy (Ti-6al-4v)

被引：3
|
作者：
Puri, Y. M. [1 ]
Gohil, Vikas [1 ]
机构：
[1] Visvesvaraya Natl Inst Technol, CAD CAM Ctr, Dept Mech Engn, Nagpur 440010, Maharashtra, India
来源：
2016 SECOND INTERNATIONAL CONFERENCE ON MECHANICAL AND AERONAUTICAL ENGINEERING (ICMAE 2016) | 2017年 / 187卷
关键词：
PARAMETERS; ROTATION;
D O I：
10.1088/1757-899X/187/1/012036
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
Electrical discharge turning (EDT) is a new machining process in which an external axis is added to a conventional EDM machine in order to produce precise cylindrical forms on hard and difficult to machine materials. By feeding a pre shaped tool electrode against a rotating work piece, axially symmetrical pats can be produce. The machining performance of EDT process is influenced by its machining parameters, which directly affect the quality of the machined component. This paper presents an experimental study on the effects of EDM parameters namely pulse-on time, peak current, gap voltage, spindle speed and flushing pressure on material removal rate (MRR) in electrical discharge turning of titanium alloy Ti6-Al-4V. This has been done by means of the Taguchi's design of experiment technique. A mathematical model has been developed for MRR by regression analysis and factor effects were analyzed using analysis of variance (ANOVA). Signal-to-noise ratio analysis is used to find the optimal condition.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] An experimental and numerical study for the damage characterization of a Ti-6AL-4V titanium alloy
    Allahverdizadeh, Nima
    Gilioli, Andrea
    Manes, Andrea
    Giglio, Marco
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 93 : 32 - 47
  • [22] Theoretical and Experimental Investigation of Material Removal Rate in Magnetorheological Shear Thickening Polishing of Ti-6Al-4V Alloy
    Tian, Yebing
    Ma, Zhen
    Ahmad, Shadab
    Qian, Cheng
    Ma, Xifeng
    Yuan, Xiangyu
    Fan, Zenghua
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2024, 146 (03):
  • [23] Ultrasonic Assisted Electrical Discharge Machining of Ti-6Al-4V Alloy
    Shabgard, M. R.
    Alenabi, H.
    MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (08) : 991 - 1000
  • [24] LAYERED MATERIAL MANUFACTURED FROM TITANIUM ALLOY Ti-6Al-4V
    Ganeeva, A. A.
    Kruglov, A. A.
    Lutfullin, R. Ya.
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2010, 25 (02) : 136 - 141
  • [25] Study on vacuum brazing of titanium alloy Ti-6Al-4V
    Wu, Minfang
    Jiang, Chengyu
    Yu, Zhishui
    Liang, Chao
    2002, Editorial Office of Chinese Journal of Mechanical Engineering (38):
  • [26] Ultrasonic vibration-assisted turning of Titanium alloy Ti-6Al-4V: numerical and experimental investigations
    Kandi, Rudranarayana
    Sahoo, Susanta Kumar
    Sahoo, Ananda Kumar
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2020, 42 (08)
  • [27] Micro-electrical discharge machining of Titanium alloy (Ti-6Al-4V) by Sawtooth pulse current
    Kalaiarasi, K.
    Senthilkumar, C.
    Balamurugan, M.
    ArokiaDass, R.
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2022, 17 (04):
  • [28] Experimental and numerical analysis of high strain rate response of Ti-6Al-4V titanium alloy
    Bragov, A.
    Konstantinov, A.
    Lomunov, A.
    Sergeichev, I.
    Fedulov, B.
    DYMAT 2009: 9TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, VOL 2, 2009, : 1465 - +
  • [29] Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cutting
    Gong, Le (legong@nuaa.edu.cn), 1600, Springer London (96): : 9 - 12
  • [30] Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cutting
    Wei Zhao
    Le Gong
    Fei Ren
    Liang Li
    Qing Xu
    Aqib Mashood Khan
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 4021 - 4027
12345