The Influence of the Radial Diffuser Geometry on the Position of Best Efficiency Point of the Multistage Pump

被引:1
|
作者
Varchola, Michal [1 ]
Hlbocan, Peter [1 ]
机构
[1] Slovak Univ Technol Bratislava, Inst Chem & Hydraul Machines & Equipment, Fac Mech Engn, Bratislava 81231 1, Slovakia
关键词
D O I
10.1063/1.4892746
中图分类号
O414.1 [热力学];
学科分类号
摘要
The results of the research which were employed in the systems design of the radial diffuser geometry of the multistage pump with respect to the internal flow pattern especially in the stator are presented in the paper. The contribution deals with the blade cuts shape of the radial diffuser, the course of the diffusion and the suppression of secondary flows in the radial diffuser passages. The areas with secondary flows are investigated on the basis of the CFD simulation. The good image of the influence of some characteristic parameters on the efficiency of the multistage pump with radial diffuser in bulk is obtained by the analysis of velocity and pressure fields in the diffuser.
引用
收藏
页码:257 / 266
页数:10
相关论文
共 30 条
  • [21] Investigation of Flow Separation Characteristics in a Pump as Turbines Impeller Under the Best Efficiency Point Condition
    Lin, Tong
    Li, Xiaojun
    Zhu, Zuchao
    Xie, Renhua
    Lin, Yanpi
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2021, 143 (06):
  • [22] INVESTIGATION OF PRESSURE PULSATION IN THE STAGES OF AN ELECTRIC SUBMERSIBLE PUMP AT BEST EFFICIENCY POINT UNDER VARIOUS SPEEDS
    Arumugam, Dhanasekaran
    Sivasailam, Kumaraswamy
    PROCEEDINGS OF THE ASME/JSME/KSME JOINT FLUIDS ENGINEERING CONFERENCE, 2019, VOL 3B, 2019,
  • [23] Proper orthogonal decomposition energy analysis in a nuclear reactor coolant pump based on PIV at the best efficiency point
    Ni, Dan
    Huang, Shiyuan
    Zhang, Yang
    Gao, Bo
    Lu, Sheng
    NUCLEAR ENGINEERING AND DESIGN, 2023, 410
  • [24] Influence of the blade geometry on flow instabilities in a radial pump elucidated by time-resolved particle-image velocimetry
    Krause, Nico
    Pap, Elemer
    Thevenin, Dominique
    PROCEEDINGS OF THE ASME TURBO EXPO 2007, VOL 6, PTS A AND B, 2007, : 1659 - 1668
  • [25] Effect of relative impeller-to-volute position on hydraulic efficiency and static radial force distribution in a circular volute centrifugal pump
    Baun, DO
    Köstner, L
    Flack, RD
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2000, 122 (03): : 598 - 605
  • [26] The application of acoustic emission for detecting incipient cavitation and the best efficiency point of a 60 kW centrifugal pump: case study
    Alfayez, L
    Mba, D
    Dyson, G
    NDT & E INTERNATIONAL, 2005, 38 (05) : 354 - 358
  • [27] Influence of powder injection point position on efficiency of powder preheating in cold spray: Numerical study
    Sova, A.
    Grigoriev, S.
    Kochetkova, A.
    Smurov, I.
    SURFACE & COATINGS TECHNOLOGY, 2014, 242 : 226 - 231
  • [28] INVESTIGATION OF THE INFLUENCE OF OPERATING POINT ON THE SHAPE AND POSITION OF TEXTILE MATERIAL IN THE INLET PIPE TO A DRY-INSTALLED WASTEWATER PUMP
    Jensen, Anna Lyhne
    Gerlach, Stefan
    Lykholt-Ustrup, Flemming
    Sorensen, Henrik
    Rosendahl, Lasse
    Thamsen, Paul Uwe
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2017, VOL 1A, 2017,
  • [29] Applied methodology to estimate the characteristics curves of pumps working as turbines when the water manager only know the best efficiency point as pump
    Mercedes, Angel V.
    Sanchez-Romero, Francisco-Javier
    Amparo Lopez-Jimenez, P.
    Perez-Sanchez, Modesto
    PROCEEDINGS OF THE 39TH IAHR WORLD CONGRESS, 2022, : 2535 - 2542
  • [30] Optimization-Based Methodology for Selection of Pump-as-Turbine in Water Distribution Networks: Effects of Different Objectives and Machine Operation Limits on Best Efficiency Point
    Mitrovic, Djordje
    Garcia Morillo, Jorge
    Rodriguez Diaz, Juan Antonio
    Mc Nabola, Aonghus
    JOURNAL OF WATER RESOURCES PLANNING AND MANAGEMENT, 2021, 147 (05)