An optimized control method for a high utilization ratio and fast filling speed in hydrogen refueling stations

被引：50
|
作者：
Zheng, Jinyang [1 ]
Ye, Jianjun [1 ]
Yang, Jian [1 ]
Tang, Ping [1 ]
Zhao, Lei [1 ]
Kern, Maradee [2 ]
机构：
[1] Zhejiang Univ, Inst Chem Machinery & Proc Equipment, Hangzhou 310027, Zhejiang, Peoples R China
[2] San Jacinto Coll, Dept English, Houston, TX 77089 USA
来源：
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY | 2010年 / 35卷 / 07期
关键词：
Utilization ratio of hydrogen; Filling time; Optimized control method; Hydrogen refueling station;
D O I：
10.1016/j.ijhydene.2009.07.001
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
A well-designed control system with a high utilization ratio of hydrogen and a fast filling speed are two critical objectives to ensure the reduction of cost and time required in the refueling process. In this paper, the popular three-stage refueling process is modeled with the aim to address both objectives. Using the real gas law of hydrogen, the utilization ratio of hydrogen filling is analyzed and the filling flowrate and time of each stage are evaluated. A multi-objective iterative optimization model is established and an optimization algorithm for the filling process is proposed to achieve both fast refueling and high utilization. Numerical results can be applied to the optimization of an actual hydrogen filling process. Besides, the tests show that an optimized control method can significantly improve the utilization ratio and allow refueling in a widely acceptable time. (C) 2009 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：3011 / 3017
页数：7
相关论文
共 50 条
  • [31] CFD simulation on hydrogen pulsating heat pipe with single turn and a high filling ratio
    Xu, Jinzhu
    Jiao, Bo
    Sun, Xiao
    Wang, Fang
    Gan, Zhihua
    [J]. Huagong Jinzhan/Chemical Industry and Engineering Progress, 2020, 39 (07): : 2556 - 2565
  • [32] Control Method for Output Speed during Velocity Ratio Change under High Rotational Speed Using an Uninterrupted Transmission System
    Kang, Jungchul
    Komori, Masaharu
    Zhang, Shuai
    Sugiyama, Koki
    [J]. JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2012, 6 (07): : 1281 - 1297
  • [33] A fast switching method for PM Synchronous Motor speed control
    Ahmadi, Damoun
    Nasiri, Adel
    [J]. APEC 2008: TWENTY-THIRD ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1-4, 2008, : 1814 - 1818
  • [34] Modelling and Simulation of Electric Vehicle Fast Charging Stations Driven by High Speed Railway Systems
    Brenna, Morris
    Longo, Michela
    Yaici, Wahiba
    [J]. ENERGIES, 2017, 10 (09)
  • [35] The CVT's Speed Ratio Control Research When the Vehicle Bending at High Speed
    Yang, Xinhua
    [J]. PROCEEDINGS OF THE 2017 2ND INTERNATIONAL CONFERENCE ON ELECTRICAL, CONTROL AND AUTOMATION ENGINEERING (ECAE 2017), 2017, 140 : 144 - 147
  • [36] High-Speed Online MPC Based on a Fast Gradient Method Applied to Power Converter Control
    Richter, Stefan
    Mariethoz, Sebastien
    Morari, Manfred
    [J]. 2010 AMERICAN CONTROL CONFERENCE, 2010, : 4737 - 4743
  • [37] Fast flow control in high-speed communications networks
    Kwan, C
    Xu, R
    Haynes, L
    Chou, CH
    Geraniotis, E
    [J]. PROCEEDINGS OF THE 37TH IEEE CONFERENCE ON DECISION AND CONTROL, VOLS 1-4, 1998, : 2139 - 2140
  • [38] A novel method for fast detection of high-speed targets
    Fu, Maozhong
    Sun, Haixin
    Deng, Zhenmiao
    Li, Yuhan
    Zhang, Yunjian
    [J]. SIGNAL PROCESSING, 2021, 182 (182)
  • [39] A Fast Eye Size Evaluation Method for High Speed Signal
    Song, Hyoseok
    Kim, Kwangmin
    Han, Changyoon
    Kim, Byungsub
    [J]. 2022 19TH INTERNATIONAL SOC DESIGN CONFERENCE (ISOCC), 2022, : 396 - 397
  • [40] Optimized coordinated control method with virtual inertia based on fractional impedance model for charging stations
    Li, Jiang
    Hu, Jianwei
    Liu, Bo
    [J]. FRONTIERS IN ENERGY RESEARCH, 2024, 12
12345