Comparison of tensile properties of weft-knit 1x1 rib glass epoxy composites with a different location of layers

被引：16

作者：

Tercan, Mevluet ^{[1
]}

Asi, Osman

Yueksekkaya, Mehmet Emin

Aktas, Alaattin

机构：

[1] Usak Univ, Fac Engn, Dept Text Engn, TR-64300 Usak, Turkey

[2] Usak Univ, Fac Engn, Dept Mech Engn, TR-64300 Usak, Turkey

来源：

MATERIALS & DESIGN | 2007年 / 28卷 / 07期

关键词：

D O I：

10.1016/j.matdes.2006.06.003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, the tensile properties of 1 x 1 rib knitted fabric composites were determined in three directions 0 degrees, 45 degrees, and 90 degrees. The composites were produced in two different cases as two types with different location of layers. In the first type of composites, layers were located in a plain manner parallel to each other and in the second type of composites, layers were positioned like a sandwich structure. The knitted fabrics used for the study are manufactured from a 200 tex glass yarn with epoxy resin and cured in a hot press machine. The values of the composites obtained from the measurements were compared. The results showed that the tensile properties of first type and second type of composite materials vary with respect to direction and orientation of the layers. (c) 2006 Elsevier Ltd. All rights reserved.

引用

页码：2172 / 2176

页数：5

共 48 条

[31] Self-reinforced composites of bioabsorbable polymer and bioactive glass with different bloactive glass contents.: Part 1:: Initial mechanical properties and bioactivity
Niemelä, T
Niiranen, H
Kellomäki, M
Törmälä, P
ACTA BIOMATERIALIA, 2005, 1 (02) : 235 - 242
[32] EFFECT OF SURFACE-STRUCTURE OF PT ON ITS ELECTRONIC PROPERTIES AND ADSORPTION OF CO, O2, AND H2 - COMPARISON OF PT(100)-(5X20) AND PT(100)-(1X1)
HELMS, CR
BONZEL, HP
KELEMEN, S
JOURNAL OF CHEMICAL PHYSICS, 1976, 65 (05): : 1773 - 1782
[33] Structural properties of tensile-strained Si layers grown on Si1-xGex virtual substrates (x=0.2, 0.3, 0.4 and 0.5)
Hartmann, J. M.
Abbadie, A.
Rouchon, D.
Barnes, J. P.
Mermoux, M.
Billon, T.
THIN SOLID FILMS, 2008, 516 (12) : 4238 - 4246
[34] Comparison of MONOS memory device integrity when using Hf1-x-yNxOy trapping layers with different N compositions
Yang, H. J.
Cheng, C. F.
Chen, W. B.
Lin, S. H.
Yeh, F. S.
McAlister, Sean P.
Chin, Albert
IEEE TRANSACTIONS ON ELECTRON DEVICES, 2008, 55 (06) : 1417 - 1423
[35] Effects of low temperature on the mechanical properties of glass fibre-epoxy composites: static tension, compression, R=0.1 and R =-1 fatigue of ±45° laminates
Cormier, Laurent
Joncas, Simon
Nijssen, Rogier P. L.
WIND ENERGY, 2016, 19 (06) : 1023 - 1041
[36] Magnetomechanical properties of epoxy-bonded (Tb0.3Dy0.7)1-xPrxFe1.55 (0 ≤ x ≤ 0.4) pseudo-1-3 magnetostrictive composites
Lv, Xiangke
Or, Siu Wing
Liu, Wei
Liu, Xionghua
Zhang, Zhidong
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2009, 42 (03)
[37] STUDIES ON MECHANICAL-PROPERTIES OF POLYMER COMPOSITES BY X-RAY-DIFFRACTION .1. RESIDUAL-STRESS IN EPOXY-RESIN BY X-RAY-DIFFRACTION
NAKAMAE, K
NISHINO, T
AIRU, X
MATSUMOTO, T
MIYAMOTO, T
JOURNAL OF APPLIED POLYMER SCIENCE, 1990, 40 (11-12) : 2231 - 2238
[38] Galaxy properties of type 1 and 2 X-ray selected AGN and a comparison among different classification criteria
Mountrichas, G.
Buat, V
Georgantopoulos, I
Yang, G.
Masoura, V. A.
Boquien, M.
Burgarella, D.
ASTRONOMY & ASTROPHYSICS, 2021, 653
[39] Dynamic magnetomechanical properties of epoxy-bonded (Tb0.3Dy0.7)1-xPrxFe1.55 (0 ≤ x ≤ 0.4) pseudo-1-3 magnetostrictive composites
Lv, Xiangke
Or, Siu Wing
Liu, Wei
Liu, Xionghua
Zhang, Zhidong
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 476 (1-2) : 271 - 275
[40] Microstructure and magnetostrictive properties of epoxy-bonded Tb1-xNdx(Fe0.8Co0.2)1.93(0.20 ≤ x ≤ 0.75) composites
Pan, Z. B.
Liu, J. J.
Liu, X. Y.
Wang, R.
Wang, J.
Si, P. Z.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2014, 28 (23):

← 1 2 3 4 5 →